RF regions
The map below shows which RF channel plan can be used by devices and base stations depending on their geographical location. Relevant channel plans appear when hovering over a region.
- EU433
- CN470
- RU864
- IN865
- EU868
- AU915
- US915
- AS923
An RF Region defines the RF channel plan (that is to say, frequency allocation) to be used by devices and base stations. It also defines the maximum authorized transmission power and duty cycle and/or Listen Before Talk (LBT) limits for downlink channels, according to the local regulations in each country/region.
RF Region also defines a set of radio parameters related to LoRaWAN® MAC layer, such as the RX1 Data Rate Offset, RX2 Frequency and Data Rate, RX delay...
Several RF Regions may be defined in the network, each RF Region typically covering a continuous geographical area. Each base station, using LRR or Basics™Station packet forwarder, is associated with a given RF Region. All base stations sharing the same RF Region shall have the same set of configuration parameters.
When an RF Region is associated with a base station (LRR), all the devices served by this base station as their best-LRR shall inherit the RF channel plan and radio parameters set in this RF Region.
We recommend avoiding as much as possible overlapping between distinct RF Regions, as well as setting the boundaries of each RF Region in a way to minimize the border effect.
The following tables (classified by ISM Band) provides you with information about each RF Region included in the latest version of ThingPark's RF Region catalog, to guide you in choosing the right RF Region for your deployment.
EU 863-870 Mhz ISM band (EU868)
RF Region Name / RF Region ID | Description | Eligible countries (ISO Alpha-2 country code) | RF channels | RX1/RX2 settings |
|---|---|---|---|---|
| EU 863-870MHz (8 channels) / EU868_8channels | This 8-channels RF Region applies to any region where the use of the 863-870Mhz ISM radio spectrum is compliant with the ETSI EN300.220 standard. | AE, AL, AD, AT, BE, BA, BG, CY, CZ, DE, DK, ES, EE, FR, FI, GB, HU, NL, HR, IT, IE, IR, IS, LB, LI, LT, LU, LV, MD, MK, MT, ME, NO, PL, OM, PT, RO, RS, CH, SA, SK, SI, TR, ZA | 867.1 … 868.5Mhz | RX1DROffset = 2. RX2 Frequency = 869.525Mhz. RX2 data rate = DR3 (SF9). |
| EU 863-870MHz (16 channels)/ EU868_16channels | This 16-channels RF Region applies to any region where the use of the 863-870Mhz ISM radio spectrum is compliant with the ETSI EN300.220 standard. The LoRaWAN® Base Station must support at least 16-channels. | AE, AL, AD, AT, BE, BA, BG, CY, CZ, DE, DK, ES, EE, FR, FI, GB, HU, NL, HR, IT, IE, IR, IS, LB, LI, LT, LU, LV, MD, MK, MT, ME, NO, OM, PL, PT, RO, RS, CH, SA, SK, SI, TR, ZA | 865.5 … 868.5Mhz | RX1DROffset = 2. RX2 Frequency = 869.525Mhz. RX2 data rate = DR3 (SF9). |
| Morocco 868MHz/ EU868_Morocco | This RF Region applies to Morocco's unlicensed band. | MA | 868.1 … 869.3Mhz (200Khz channel spacing) + 869.8Mhz | RX1DROffset = 2. RX2 Frequency = 869.525Mhz. RX2 data rate = DR3 (SF9). |
| Senegal 868MHz/ EU868_Senegal | This RF Region applies to Senegal unlicensed band. | SN | 868.1 … 868.5Mhz | RX1DROffset = 2. RX2 Frequency = 869.525Mhz. RX2 data rate = DR3 (SF9). |
| Philippines 868MHz/ EU868_Philippines | This RF Region applies to Philippines, using the 868 Mhz ISM band. It consists of 5 RF channels. | PH | 868.1, 868.3, 868.5, 868.8 and 869.0 Mhz | RX1DROffset = 2. RX2 Frequency = 869.525Mhz. RX2 data rate = DR0 (SF12). |
| Ivory Coast 868MHz (8 channels)/ EU868_IvoryCoast_8channels | This RF Region applies to Ivory Coast (Côte d'Ivoire), using the 868 Mhz ISM band. | CI | 868.1 … 869.3Mhz (200Khz channel spacing) + 869.9Mhz | RX1DROffset = 2. RX2 Frequency = 869.525Mhz. RX2 data rate = DR3 (SF9). |
| Ivory Coast 868MHz (10 channels)/ EU868_IvoryCoast_10channels | This 10-channels RF Region applies to Ivory Coast (Côte d'Ivoire), using the 868 MHz ISM band. The LoRaWAN Base Station must support at least 16-channels. | CI | 868.1 … 869.9Mhz | RX1DROffset = 2. RX2 Frequency = 869.525Mhz. RX2 data rate = DR3 (SF9). |
US 902-928 Mhz ISM band (US915)
RF Region Name / RF Region ID | Description | Eligible countries (ISO Alpha-2 country code) | RF channels | RX1/RX2 settings |
|---|---|---|---|---|
| US 915MHz (72 channels) / US915_72channels | This 72-channels RF Region applies to any region where the use of the 902-928 MHz ISM radio spectrum is compliant with the FCC Part 15.247 standard. The LoRaWAN® Base Station must support 64-channels at 125KHz bandwidth. | AR, CA, CL, CO, EC, GT, JM, NI, NX, PA, US, UY | LC0 (902.3Mhz) … LC63 (914.9Mhz) | RX1DROffset = 0.
RX2 Frequency = 923.3Mhz.
RX2 data rate = DR8 (SF12). |
| US 915MHz (16 channels: CH0-CH15) / US915_16channels | This 16-channels RF Region applies to any region where the use of the 902-928 MHz ISM radio spectrum is compliant with the FCC Part 15.247 standard. The LoRaWAN® Base Station must support 16-channels at 125KHz bandwidth. | LC0 (902.3Mhz) … LC15 (905.3Mhz) | ||
| US 915MHz (8 channels: CH0-CH7) / US915_First8channels | This 8-channels RF Region applies to any region where the use of the 902-928 MHz ISM radio spectrum is compliant with the FCC Part 15.247 standard. The channel plan consists of the first block of 8 channels defined by LoRaWAN® specification (CH0 to CH7). | LC0 (902.3Mhz) … LC7 (903.7Mhz) | ||
| US 915MHz (8 channels: CH8-CH15) / US915_8channels_Block2 | This 8-channels RF Region applies to any region where the use of the 902-928 MHz ISM radio spectrum is compliant with the FCC Part 15.247 standard. The channel plan consists of the second block of 8 channels defined by LoRaWAN® specification (CH8 to CH15). | LC8 (903.9Mhz) … LC15 (905.3Mhz) | ||
| US 915MHz (8 channels: CH16-CH23) / US915_8channels_Block3 | This 8-channels RF Region applies to any region where the use of the 902-928 MHz ISM radio spectrum is compliant with the FCC Part 15.247 standard. The channel plan consists of the third block of 8 channels defined by LoRaWAN® specification (CH16 to CH23). | LC16 (905.5Mhz) … LC23 (906.9Mhz) | ||
| US 915MHz (8 channels: CH24-CH31) / US915_8channels_Block4 | This 8-channels RF Region applies to any region where the use of the 902-928 MHz ISM radio spectrum is compliant with the FCC Part 15.247 standard. The channel plan consists of the fourth block of 8 channels defined by LoRaWAN® specification (CH24 to CH31). | LC24 (907.1Mhz) … LC31 (908.5Mhz) | ||
| US 915MHz (8 channels: CH32-CH39) / US915_8channels_Block5 | This 8-channels RF Region applies to any region where the use of the 902-928 MHz ISM radio spectrum is compliant with the FCC Part 15.247 standard. The channel plan consists of the fifth block of 8 channels defined by LoRaWAN® specification (CH32 to CH39). | LC32 (908.7Mhz) … LC39 (910.1Mhz) | ||
| US 915MHz (8 channels: CH40-CH47) / US915_8channels_Block6 | This 8-channels RF Region applies to any region where the use of the 902-928 MHz ISM radio spectrum is compliant with the FCC Part 15.247 standard. The channel plan consists of the sixth block of 8 channels defined by LoRaWAN® specification (CH40 to CH47). | LC40 (910.3Mhz) … LC47 (911.7Mhz) | ||
| US 915MHz (8 channels: CH48-CH55) / US915_8channels_Block7 | This 8-channels RF Region applies to any region where the use of the 902-928 MHz ISM radio spectrum is compliant with the FCC Part 15.247 standard. The channel plan consists of the seventh block of 8 channels defined by LoRaWAN® specification (CH48 to CH55). | LC48 (911.9Mhz) … LC55 (913.3Mhz) | ||
| US 915MHz (8 channels: CH56-CH63) / US915_8channels_Block8 | This 8-channels RF Region applies to any region where the use of the 902-928 MHz ISM radio spectrum is compliant with the FCC Part 15.247 standard. The channel plan consists of the eighth block of 8 channels defined by LoRaWAN® specification (CH56 to CH63). | LC56 (913.5Mhz) … LC63 (914.9Mhz) |
AU 915-928 Mhz ISM band (AU915)
RF Region Name / RF Region ID | Description | Eligible countries (ISO Alpha-2 country code) | RF channels | RX1/RX2 settings |
|---|---|---|---|---|
| AU 915MHz (72 channels) / AU915_72channels | This 72-channels RF Region applies to Australia, New Zealand and some Latin American countries where the ISM band extends from 915 to 928 MHz. The LoRaWAN® Base Station must support 64-channels at 125KHz bandwidth. | AU, BO, CL, DO, EC, GT, NZ, PA, PE, PG, PY, SV, UY | LC0 (915.2Mhz) … LC63 (927.8Mhz) | RX1DROffset = 0.
RX2 Frequency = 923.3Mhz.
RX2 data rate = DR8 (SF12). |
| AU 915MHz (16 channels: CH0-CH15) / AU915_16channels | This 16-channels RF Region applies to Australia, New Zealand and some Latin American countries where the ISM band extends from 915 to 928 MHz. The LoRaWAN® Base Station must support 16-channels at 125KHz bandwidth. | LC0 (915.2Mhz) … LC15 (918.2Mhz) | ||
| AU 915MHz (8 channels: CH0-CH7) / AU915_First8channels | This 8-channels RF Region applies to Australia, New Zealand and some Latin American countries where the ISM band extends from 915 to 928 MHz. The channel plan consists of the first block of 8 channels defined by LoRaWAN® specification (CH0 to CH7). | LC0 (915.2Mhz) … LC7 (916.6Mhz) | ||
| AU 915MHz (8 channels: CH8-CH15) / AU915_8channels_Block2 | This 8-channels RF Region applies to Australia, New Zealand and some Latin American countries where the ISM band extends from 915 to 928 MHz. The channel plan consists of the second block of 8 channels defined by LoRaWAN® specification (CH8 to CH15). | LC8 (916.8Mhz) … LC15 (918.2Mhz) | ||
| AU 915MHz (8 channels: CH16-CH23) / AU915_8channels_Block3 | This 8-channels RF Region applies to Australia, New Zealand and some Latin American countries where the ISM band extends from 915 to 928 MHz. The channel plan consists of the third block of 8 channels defined by LoRaWAN® specification (CH16 to CH23). | LC16 (918.4Mhz) … LC23 (919.8Mhz) | ||
| AU 915MHz (8 channels: CH24-CH31) / AU915_8channels_Block4 | This 8-channels RF Region applies to Australia, New Zealand and some Latin American countries where the ISM band extends from 915 to 928 MHz. The channel plan consists of the fourth block of 8 channels defined by LoRaWAN® specification (CH24 to CH31). | LC24 (920.0Mhz) … LC31 (921.4Mhz) | ||
| AU 915MHz (8 channels: CH32-CH39) / AU915_8channels_Block5 | This 8-channels RF Region applies to Australia, New Zealand and some Latin American countries where the ISM band extends from 915 to 928 MHz. The channel plan consists of the fifth block of 8 channels defined by LoRaWAN® specification (CH32 to CH39). | LC32 (921.6Mhz) … LC39 (923.0Mhz) | ||
| AU 915MHz (8 channels: CH40-CH47) / AU915_8channels_Block6 | This 8-channels RF Region applies to Australia, New Zealand and some Latin American countries where the ISM band extends from 915 to 928 MHz. The channel plan consists of the sixth block of 8 channels defined by LoRaWAN® specification (CH40 to CH47). | LC40 (923.2Mhz) … LC47 (924.6Mhz) | ||
| AU 915MHz (8 channels: CH48-CH55) / AU915_8channels_Block7 | This 8-channels RF Region applies to Australia, New Zealand and some Latin American countries where the ISM band extends from 915 to 928 MHz. The channel plan consists of the seventh block of 8 channels defined by LoRaWAN® specification (CH48 to CH55). | LC48 (924.8Mhz) … LC55 (926.2Mhz) | ||
| AU 915MHz (8 channels: CH56-CH63) / AU915_8channels_Block8 | This 8-channels RF Region applies to Australia, New Zealand and some Latin American countries where the ISM band extends from 915 to 928 MHz. The channel plan consists of the eighth block of 8 channels defined by LoRaWAN® specification (CH56 to CH63). | LC56 (926.4Mhz) … LC63 (927.8Mhz) |
AS 923Mhz (AS923)
| RF Region Name/ RF Region ID | Description | Eligible countries (ISO Alpha-2 country code) | RF channels | RX1/RX2 settings |
|---|---|---|---|---|
| Taiwan 923MHz (8 channels) / AS923_Taiwan_8channels | This 8-channels RF Region applies to Taiwan & Hong Kong where the ISM band extends from 920 to 925 MHz. | HK, TW | 922.0 … 923.4Mhz (200Khz channel spacing) | RX1DROffset = 0. RX2 Frequency = 923.2Mhz. RX2 data rate = DR2 (SF10). |
| Taiwan 923MHz (16 channels) / AS923_Taiwan_16channels | This 16-channels RF Region applies to Taiwan & Hong Kong where the ISM band extends from 920 to 925 MHz. The LoRaWAN® Base Station must support 16-channels. | HK, TW | 920.4 … 922.4Mhz + 923.0 … 923.8Mhz (200Khz channel spacing) | RX1DROffset = 0. RX2 Frequency = 923.2Mhz. RX2 data rate = DR2 (SF10). |
| Generic 8-channels Asian profile [922-924 MHz] / AS923_8channels_922_924 | This RF Region applies to Asian, Latin American and Oceanian countries whose ISM band includes the 922 to 924MHz frequency range. | AU, BN, BO, CR, EC, NZ, PA, PE, PY, SG, SV, TH, UY | 922.0 … 923.4Mhz (200Khz channel spacing) | RX1DROffset = 0.
RX2 Frequency = 923.6Mhz.
RX2 data rate = DR2 (SF10). |
| Generic 8-channels Asian profile [923-925 MHz] / AS923_8channels_923_925 | This RF Region applies to Asian, Latin American and Oceanian countries whose ISM band includes the 923 to 925MHz frequency range. | AU, BN, BO, CR, EC, KH, LA, NZ, PA, PE, PY, SG, SV, TH, UG, UY | 923.2 … 924.6Mhz (200Khz channel spacing) | RX1DROffset = 0.
RX2 Frequency = 923.6Mhz.
RX2 data rate = DR2 (SF10). |
| Generic 16-channels Asian profile [921-925 MHz] / AS923_16channels_921_925 | This RF Region applies to Asian, Latin American and Oceanian countries whose ISM band includes the 921 to 925MHz frequency range. | AU, BN, BO, CR, EC, NZ, PA, PE, PY, SG, SV, TH, UY | 921.2 … 924.2Mhz (200Khz channel spacing) | RX1DROffset = 0.
RX2 Frequency = 923.6Mhz.
RX2 data rate = DR2 (SF10). |
| AS923 New Zealand Asymmetric 8-channels / AS923_8AsymChannels_4W | This RF Region applies to New Zealand and other Latin American countries whose ISM band includes the 923 to 927MHz frequency range with maximum allowed power of 4W. The channel plan configuration consists of 8 asymmetric channels, meaning downlink channels use different frequencies than uplink channels. | BO, NZ, PA, SV, UY | UL: 922.0 … 923.4Mhz | RX1DROffset = 0.
RX2 Frequency = 926.4Mhz.
RX2 data rate = DR2 (SF10). |
| AS923 Australia Asymmetric 8-channels / AS923_8AsymChannels_1W | This RF Region applies to Australia and other Latin American countries whose ISM band includes the 923 to 927MHz frequency range with maximum allowed power of 1W. The channel plan configuration consists of 8 asymmetric channels, meaning downlink channels use different frequencies than uplink channels. | AU, CR, EC, PE | UL: 922.0 … 923.4Mhz | RX1DROffset = 0.
RX2 Frequency = 926.4Mhz.
RX2 data rate = DR2 (SF10). |
| Japan 8-channels 20mW / AS923_Japan_20mW_8channels | This RF Region applies to Japan where the ISM band extends between 920 and 923.5 MHz, with maximum allowed conducted power of 20mW. | JP | 922.0 … 923.4Mhz (200Khz channel spacing) | RX1DROffset = 2.
RX2 Frequency = 923.2Mhz.
RX2 data rate = DR2 (SF10). |
| Japan 15-channels 20mW / AS923_Japan_20mW_15channels | This RF Region applies to Japan where the ISM band extends between 920 and 923.5 MHz, with maximum allowed conducted power of 20mW. The LoRaWAN® Base Station must support 16-channels. | JP | 920.6 … 923.4Mhz (200Khz channel spacing) | RX1DROffset = 2.
RX2 Frequency = 923.2Mhz.
RX2 data rate = DR2 (SF10). |
| Japan 8-channels 250mW / AS923_Japan_250mW_8channels | This RF Region applies to Japan where the ISM band extends between 920 and 923.5 MHz, with maximum allowed conducted power of 250mW. | JP | 922.0 … 923.4Mhz (200Khz channel spacing) | RX1DROffset = 0.
RX2 Frequency = 923.2Mhz.
RX2 data rate = DR2 (SF10). |
| Japan 15-channels 250mW / AS923_Japan_250mW_15channels | This RF Region applies to Japan where the ISM band extends between 920 and 923.5 MHz, with maximum allowed conducted power of 250mW. The LoRaWAN® Base Station must support 16-channels. | JP | 920.6 … 923.4Mhz (200Khz channel spacing) | RX1DROffset = 0.
RX2 Frequency = 923.2Mhz.
RX2 data rate = DR2 (SF10). |
| AS923 Australia symmetric 8-channels / AS923_Australia_8channels | This RF Region applies to Australia and other Latin American countries whose ISM band includes the 923 to 927MHz frequency range with maximum allowed power of 1W. The channel plan configuration consists of 8 symmetric channels meaning downlink channels use the same frequencies as uplink channels. | AU, CR, EC, PE | 922.0 … 923.4Mhz (200Khz channel spacing) | RX1DROffset = 0.
RX2 Frequency = 923.6Mhz.
RX2 data rate = DR2 (SF10). |
AS923 Australia symmetric 16-channels / AS923_Australia_16channels | This RF Region applies to Australia and other Latin American countries whose ISM band includes the 923 to 927MHz frequency range with maximum allowed power of 1W. The channel plan configuration consists of 16 symmetric channels meaning downlink channels use the same frequencies as uplink channels. | AU, CR, EC, PE | 922.0 … 925.0Mhz (200Khz channel spacing) | RX1DROffset = 0.
RX2 Frequency = 923.6Mhz.
RX2 data rate = DR2 (SF10). |
| AS923 New Zealand symmetric 8-channels / AS923_NewZealand_8channels | This RF Region applies to New Zealand and other Latin American countries whose ISM band includes the 923 to 927MHz frequency range with maximum allowed power of 1W. The channel plan configuration consists of 8 symmetric channels meaning downlink channels use the same frequencies as uplink channels. | BO, NZ, PA, SV, UY | 922.0 … 923.4Mhz (200Khz channel spacing) | RX1DROffset = 0.
RX2 Frequency = 923.6Mhz.
RX2 data rate = DR2 (SF10). |
| AS923 New Zealand symmetric 16-channels / AS923_NewZealand_16channels | This RF Region applies to New Zealand and other Latin American countries whose ISM band includes the 923 to 927MHz frequency range with maximum allowed power of 1W. The channel plan configuration consists of 16 symmetric channels meaning downlink channels use the same frequencies as uplink channels. | BO, NZ, PA, SV, UY | 922.0 … 925.0Mhz (200Khz channel spacing) | RX1DROffset = 0.
RX2 Frequency = 923.6Mhz.
RX2 data rate = DR2 (SF10). |
| AS923-2 Vietnam 8-channels / AS923-2_Vietnam_8channels | This RF Region applies to Vietnam (919-923MHz frequency range). The channel plan configuration consists of 8 symmetric channels, based on AS923-2 regional profile. | VN | 921.4 … 922.8Mhz (200Khz channel spacing) | RX1DROffset = 0.
RX2 Frequency = 921.4Mhz.
RX2 data rate = DR2 (SF10). |
| AS923-2 Vietnam 16-channels / AS923-2_Vietnam_16channels | This RF Region applies to Vietnam (919-923MHz frequency range). The channel plan configuration consists of 16 symmetric channels, based on AS923-2 regional profile. | VN | 919.8 … 922.8Mhz (200Khz channel spacing) | |
| AS923-2 Indonesia 8-channels / AS923-2_Indonesia_8channels | This RF Region applies to Indonesia (910-923MHz frequency range). The channel plan configuration consists of 8 symmetric channels, based on AS923-2 regional profile. | ID | 921.4 … 922.8Mhz (200Khz channel spacing) | |
| AS923-2 Indonesia 14-channels / AS923-2_Indonesia_14channels | This RF Region applies to Indonesia (910-923MHz frequency range). The channel plan configuration consists of 14 symmetric channels, based on AS923-2 regional profile. | ID | 920.2 … 922.8Mhz (200Khz channel spacing) | |
| AS923 Malaysia 8-channels / AS923_Malaysia_8channels | This RF Region applies to Malaysia (919-924MHz frequency range). The channel plan configuration consists of 8 symmetric channels, based on AS923-1 regional profile. | MY | 921.9 … 922.9Mhz + 923.2 … 923.4Mhz (200Khz channel spacing) | RX1DROffset = 0.
RX2 Frequency = 921.7Mhz.
RX2 data rate = DR2 (SF10). |
| AS923 Malaysia 16-channels / AS923_Malaysia_16channels | This RF Region applies to Malaysia (919-924MHz frequency range). The channel plan configuration consists of 16 symmetric channels, based on AS923-1 regional profile. | MY | 920.7 … 922.9Mhz + 923.2 … 923.8Mhz (200Khz channel spacing) | RX1DROffset = 0.
RX2 Frequency = 921.7Mhz.
RX2 data rate = DR2 (SF10). |
| AS923-4 Israel 8-channels / AS923-4_Israel_8channels | This RF Region applies to Israel (917-920MHz frequency range). The channel plan configuration consists of 8 symmetric channels, based on AS923-4 regional profile. | IL | 917.3 … 918.7Mhz (200Khz channel spacing) | RX1DROffset = 0.
RX2 Frequency = 919.1Mhz.
RX2 data rate = DR2 (SF10). |
| AS923-4 Israel 13-channels / AS923-4_Israel_13channels | This RF Region applies to Israel (917-920MHz frequency range). The channel plan configuration consists of 13 symmetric channels, based on AS923-4 regional profile. | IL | 917.3 … 918.9Mhz + 919.3 … 919.9Mhz (200Khz channel spacing) | RX1DROffset = 0.
RX2 Frequency = 919.1Mhz.
RX2 data rate = DR2 (SF10). |
| AS923 Singapore 8-channels / AS923_Singapore_8channels | This RF Region applies to Singapore (920-925 MHz frequency range). The channel plan configuration consists of 8 symmetric channels, based on AS923-1 regional profile. | SG | 922.0 … 923.4Mhz (200Khz channel spacing) | RX1DROffset = 0.
RX2 Frequency = 923.6Mhz.
RX2 data rate = DR2 (SF10). |
| AS923 Singapore 16-channels / AS923_Singapore_16channels | This RF Region applies to Singapore (920-925 MHz frequency range). The channel plan configuration consists of 16 symmetric channels, based on AS923-1 regional profile. | SG | 921.2 … 924.2Mhz (200Khz channel spacing) | RX1DROffset = 0.
RX2 Frequency = 923.6Mhz.
RX2 data rate = DR2 (SF10). |
| AS923 Hong Kong 8-channels / AS923_Hong-Kong_8channels | This RF Region applies to Hong Kong (920-925 MHz frequency range). The channel plan configuration consists of 8 symmetric channels, based on AS923-1 regional profile. | HK | 922.0 … 923.4Mhz (200Khz channel spacing) | RX1DROffset = 0.
RX2 Frequency = 923.6Mhz.
RX2 data rate = DR2 (SF10). |
Russia 864-870Mhz (RU864)
| RF Region Name/ RF Region ID | Description | Eligible countries (ISO Alpha-2 country code) | RF channels | RX1/RX2 settings |
|---|---|---|---|---|
| Russia 868MHz (7 channels) / RU864_Russia_7channels | This 7-channels RF Region applies to Russian ISM band. It is compatible with pico/nano base stations (using v1.x reference design). | RU | 866.1 … 866.9Mhz + 868.9 … 869.1Mhz (200Khz channel spacing) | RX1DROffset = 2.
RX2 Frequency = 869.1Mhz.
RX2 data rate = DR3 (SF9). |
| Russia 868MHz (12channels) / RU864_Russia_12channels | This 12-channels RF Region applies to Russian ISM band. It is compatible with macro base stations (using v2.x reference design). | RU | 866.1 … 867.9Mhz + 868.9 … 869.1Mhz (200Khz channel spacing) | RX1DROffset = 2.
RX2 Frequency = 869.1Mhz.
RX2 data rate = DR3 (SF9). |
India 865-867Mhz (IN865)
| RF Region Name/ RF Region ID | Description | Eligible countries (ISO Alpha-2 country code) | RF channels | RX1/RX2 settings |
|---|---|---|---|---|
| India 865MHz / IN865_8channels | This 8-channels RF Region applies to India where the ISM band extends from 865 to 867 MHz. | IN | 865.0625, 865.4025, 865.9850, 865.2325, 865.5725, 865.84, 866.13, 866.275Mhz | RX1DROffset = 0.
RX2 Frequency = 866.550Mhz.
RX2 data rate = DR3 (SF9). |
Korea 920-923Mhz (KR920)
| RF Region Name/ RF Region ID | Description | Eligible countries (ISO Alpha-2 country code) | RF channels | RX1/RX2 settings |
|---|---|---|---|---|
South Korea 920MHz (7 channels) / KR920_7SymChannels | This RF Region applies to South Korea where the ISM band extends from 917 to 923.5 MHz. | KR | 921.9 … 923.3Mhz (200Khz channel spacing) | RX1DROffset = 0.
RX2 Frequency = 921.9Mhz.
RX2 data rate = DR3 (SF9). |
EU433Mhz (EU433)
| RF Region Name/ RF Region ID | Description | Eligible countries (ISO Alpha-2 country code) | RF channels | RX1/RX2 settings |
|---|---|---|---|---|
| EU 433MHz / EU433 | This RF Region applies to any region where the use of the 433 MHz ISM radio spectrum is compliant with the ETSI EN300.220 standard. | AD, AE, AL, AM, AT, AZ, BA, BD, BE, BG, BN, BY, CU, CY, CZ, DE, DK, DZ, EE, EG, ES, FR, FI, GB, GR, HK, HU, NL, HR, IE, IL, IR, IS, IT, KW, KZ, LB, LI, LK, LT, LU, LV, MA, MD, ME, MK, MM, MT, MY, NO, NZ, OM, PH, PL, PT, PY, QA, RO, RS, CH, SA, SG, SK, SI, TH, TN, TR, UA, UG, UZ, ZA | 433.175 … 434.375Mhz (200Khz channel spacing) | RX1DROffset = 2.
RX2 Frequency = 434.665Mhz.
RX2 data rate = DR2 (SF10). |