Skip to main content
Version: TAO v1.x

RF regions

The map below shows which RF channel plan can be used by devices and base stations depending on their geographical location. Relevant channel plans appear when hovering over a region.

  • EU433
  • CN470
  • RU864
  • IN865
  • EU868
  • AU915
  • US915
  • AS923
Source: LoRaWAN® Regional Parameters RP2-1.0.4

An RF Region defines the RF channel plan (that is to say, frequency allocation) to be used by devices and base stations. It also defines the maximum authorized transmission power and duty cycle and/or Listen Before Talk (LBT) limits for downlink channels, according to the local regulations in each country/region.

RF Region also defines a set of radio parameters related to LoRaWAN® MAC layer, such as the RX1 Data Rate Offset, RX2 Frequency and Data Rate, RX delay...

Several RF Regions may be defined in the network, each RF Region typically covering a continuous geographical area. Each base station, using LRR or Basics™Station packet forwarder, is associated with a given RF Region. All base stations sharing the same RF Region shall have the same set of configuration parameters.

When an RF Region is associated with a base station (LRR), all the devices served by this base station as their best-LRR shall inherit the RF channel plan and radio parameters set in this RF Region.

We recommend avoiding as much as possible overlapping between distinct RF Regions, as well as setting the boundaries of each RF Region in a way to minimize the border effect.

The following tables (classified by ISM Band) provides you with information about each RF Region included in the latest version of ThingPark's RF Region catalog, to guide you in choosing the right RF Region for your deployment.

EU 863-870 Mhz ISM band (EU868)

RF Region Name / RF Region ID

DescriptionEligible countries (ISO Alpha-2 country code)RF channelsRX1/RX2 settings
EU 863-870MHz (8 channels) / EU868_8channels

This 8-channels RF Region applies to any region where the use of the 863-870Mhz ISM radio spectrum is compliant with the ETSI EN300.220 standard.

AE, AL, AD, AT, BE, BA, BG, CY, CZ, DE, DK, ES, EE, FR, FI, GB, HU, NL, HR, IT, IE, IR, IS, LB, LI, LT, LU, LV, MD, MK, MT, ME, NO, PL, OM, PT, RO, RS, CH, SA, SK, SI, TR, ZA

867.1 … 868.5Mhz
(200Khz channel spacing)

RX1DROffset = 2.

RX2 Frequency = 869.525Mhz.

RX2 data rate = DR3 (SF9).

EU 863-870MHz (16 channels)/ EU868_16channels

This 16-channels RF Region applies to any region where the use of the 863-870Mhz ISM radio spectrum is compliant with the ETSI EN300.220 standard. The LoRaWAN® Base Station must support at least 16-channels.

AE, AL, AD, AT, BE, BA, BG, CY, CZ, DE, DK, ES, EE, FR, FI, GB, HU, NL, HR, IT, IE, IR, IS, LB, LI, LT, LU, LV, MD, MK, MT, ME, NO, OM, PL, PT, RO, RS, CH, SA, SK, SI, TR, ZA

865.5 … 868.5Mhz
(200Khz channel spacing)

RX1DROffset = 2.

RX2 Frequency = 869.525Mhz.

RX2 data rate = DR3 (SF9).

Morocco 868MHz/ EU868_Morocco

This RF Region applies to Morocco's unlicensed band.

MA

868.1 … 869.3Mhz (200Khz channel spacing) + 869.8Mhz

RX1DROffset = 2.

RX2 Frequency = 869.525Mhz.

RX2 data rate = DR3 (SF9).

Senegal 868MHz/ EU868_Senegal

This RF Region applies to Senegal unlicensed band.

SN

868.1 … 868.5Mhz
(200Khz channel spacing)

RX1DROffset = 2.

RX2 Frequency = 869.525Mhz.

RX2 data rate = DR3 (SF9).

US 902-928 Mhz ISM band (US915)

RF Region Name / RF Region ID

DescriptionEligible countries (ISO Alpha-2 country code)RF channelsRX1/RX2 settings
US 915MHz (72 channels) / US915_72channels

This 72-channels RF Region applies to any region where the use of the 902-928 MHz ISM radio spectrum is compliant with the FCC Part 15.247 standard. The LoRaWAN® Base Station must support 64-channels at 125KHz bandwidth.

AR, CA, CL, CO, EC, GT, JM, NI, NX, PA, US, UY

LC0 (902.3Mhz) … LC63 (914.9Mhz)
+ LC64 (903.0Mhz) … LC71 (914.2Mhz)

RX1DROffset = 0.

 

RX2 Frequency = 923.3Mhz.

 

RX2 data rate = DR8 (SF12).

US 915MHz (16 channels: CH0-CH15) / US915_16channels

This 16-channels RF Region applies to any region where the use of the 902-928 MHz ISM radio spectrum is compliant with the FCC Part 15.247 standard. The LoRaWAN® Base Station must support 16-channels at 125KHz bandwidth.

LC0 (902.3Mhz) … LC15 (905.3Mhz)
+ LC64 (903.0Mhz) + LC65 (904.6Mhz)

US 915MHz (8 channels: CH0-CH7) / US915_First8channels

This 8-channels RF Region applies to any region where the use of the 902-928 MHz ISM radio spectrum is compliant with the FCC Part 15.247 standard. The channel plan consists of the first block of 8 channels defined by LoRaWAN® specification (CH0 to CH7).

LC0 (902.3Mhz) … LC7 (903.7Mhz)
+ LC64 (903.0Mhz)

US 915MHz (8 channels: CH8-CH15) / US915_8channels_Block2

This 8-channels RF Region applies to any region where the use of the 902-928 MHz ISM radio spectrum is compliant with the FCC Part 15.247 standard. The channel plan consists of the second block of 8 channels defined by LoRaWAN® specification (CH8 to CH15).

LC8 (903.9Mhz) … LC15 (905.3Mhz)
+ LC65 (904.6Mhz)

US 915MHz (8 channels: CH16-CH23) / US915_8channels_Block3

This 8-channels RF Region applies to any region where the use of the 902-928 MHz ISM radio spectrum is compliant with the FCC Part 15.247 standard. The channel plan consists of the third block of 8 channels defined by LoRaWAN® specification (CH16 to CH23).

LC16 (905.5Mhz) … LC23 (906.9Mhz)
+ LC66 (906.2Mhz)

US 915MHz (8 channels: CH24-CH31) / US915_8channels_Block4

This 8-channels RF Region applies to any region where the use of the 902-928 MHz ISM radio spectrum is compliant with the FCC Part 15.247 standard. The channel plan consists of the fourth block of 8 channels defined by LoRaWAN® specification (CH24 to CH31).

LC24 (907.1Mhz) … LC31 (908.5Mhz)
+ LC67 (907.8Mhz)

US 915MHz (8 channels: CH32-CH39) / US915_8channels_Block5

This 8-channels RF Region applies to any region where the use of the 902-928 MHz ISM radio spectrum is compliant with the FCC Part 15.247 standard. The channel plan consists of the fifth block of 8 channels defined by LoRaWAN® specification (CH32 to CH39).

LC32 (908.7Mhz) … LC39 (910.1Mhz)
+ LC68 (909.4Mhz)

US 915MHz (8 channels: CH40-CH47) / US915_8channels_Block6

This 8-channels RF Region applies to any region where the use of the 902-928 MHz ISM radio spectrum is compliant with the FCC Part 15.247 standard. The channel plan consists of the sixth block of 8 channels defined by LoRaWAN® specification (CH40 to CH47).

LC40 (910.3Mhz) … LC47 (911.7Mhz)
+ LC69 (911.0Mhz)

US 915MHz (8 channels: CH48-CH55) / US915_8channels_Block7

This 8-channels RF Region applies to any region where the use of the 902-928 MHz ISM radio spectrum is compliant with the FCC Part 15.247 standard. The channel plan consists of the seventh block of 8 channels defined by LoRaWAN® specification (CH48 to CH55).

LC48 (911.9Mhz) … LC55 (913.3Mhz)
+ LC70 (912.6Mhz)

US 915MHz (8 channels: CH56-CH63) / US915_8channels_Block8

This 8-channels RF Region applies to any region where the use of the 902-928 MHz ISM radio spectrum is compliant with the FCC Part 15.247 standard. The channel plan consists of the eighth block of 8 channels defined by LoRaWAN® specification (CH56 to CH63).

LC56 (913.5Mhz) … LC63 (914.9Mhz)
+ LC71 (914.2Mhz)

AU 915-928 Mhz ISM band (AU915)

RF Region Name / RF Region ID

DescriptionEligible countries (ISO Alpha-2 country code)RF channelsRX1/RX2 settings
AU 915MHz (72 channels) / AU915_72channels

This 72-channels RF Region applies to Australia, New Zealand and some Latin American countries where the ISM band extends from 915 to 928 MHz. The LoRaWAN® Base Station must support 64-channels at 125KHz bandwidth.

AU, BO, CL, DO, EC, GT, NZ, PA, PE, PG, PY, SV, UY

LC0 (915.2Mhz) … LC63 (927.8Mhz)
+ LC64 (915.9Mhz) … LC71 (927.1Mhz)

RX1DROffset = 0.

 

RX2 Frequency = 923.3Mhz.

 

RX2 data rate = DR8 (SF12).

AU 915MHz (16 channels: CH0-CH15) / AU915_16channels

This 16-channels RF Region applies to Australia, New Zealand and some Latin American countries where the ISM band extends from 915 to 928 MHz. The LoRaWAN® Base Station must support 16-channels at 125KHz bandwidth.

LC0 (915.2Mhz) … LC15 (918.2Mhz)
+ LC64 (915.9Mhz) + LC65 (917.5Mhz)

AU 915MHz (8 channels: CH0-CH7) / AU915_First8channels

This 8-channels RF Region applies to Australia, New Zealand and some Latin American countries where the ISM band extends from 915 to 928 MHz. The channel plan consists of the first block of 8 channels defined by LoRaWAN® specification (CH0 to CH7).

LC0 (915.2Mhz) … LC7 (916.6Mhz)
+ LC64 (915.9Mhz)

AU 915MHz (8 channels: CH8-CH15) / AU915_8channels_Block2

This 8-channels RF Region applies to Australia, New Zealand and some Latin American countries where the ISM band extends from 915 to 928 MHz. The channel plan consists of the second block of 8 channels defined by LoRaWAN® specification (CH8 to CH15).

LC8 (916.8Mhz) … LC15 (918.2Mhz)
+ LC65 (917.5Mhz)

AU 915MHz (8 channels: CH16-CH23) / AU915_8channels_Block3

This 8-channels RF Region applies to Australia, New Zealand and some Latin American countries where the ISM band extends from 915 to 928 MHz. The channel plan consists of the third block of 8 channels defined by LoRaWAN® specification (CH16 to CH23).

LC16 (918.4Mhz) … LC23 (919.8Mhz)
+ LC66 (919.1Mhz)

AU 915MHz (8 channels: CH24-CH31) / AU915_8channels_Block4

This 8-channels RF Region applies to Australia, New Zealand and some Latin American countries where the ISM band extends from 915 to 928 MHz. The channel plan consists of the fourth block of 8 channels defined by LoRaWAN® specification (CH24 to CH31).

LC24 (920.0Mhz) … LC31 (921.4Mhz)
+ LC67 (920.7Mhz)

AU 915MHz (8 channels: CH32-CH39) / AU915_8channels_Block5

This 8-channels RF Region applies to Australia, New Zealand and some Latin American countries where the ISM band extends from 915 to 928 MHz. The channel plan consists of the fifth block of 8 channels defined by LoRaWAN® specification (CH32 to CH39).

LC32 (921.6Mhz) … LC39 (923.0Mhz)
+ LC68 (922.3Mhz)

AU 915MHz (8 channels: CH40-CH47) / AU915_8channels_Block6

This 8-channels RF Region applies to Australia, New Zealand and some Latin American countries where the ISM band extends from 915 to 928 MHz. The channel plan consists of the sixth block of 8 channels defined by LoRaWAN® specification (CH40 to CH47).

LC40 (923.2Mhz) … LC47 (924.6Mhz)
+ LC69 (923.9Mhz)

AU 915MHz (8 channels: CH48-CH55) / AU915_8channels_Block7

This 8-channels RF Region applies to Australia, New Zealand and some Latin American countries where the ISM band extends from 915 to 928 MHz. The channel plan consists of the seventh block of 8 channels defined by LoRaWAN® specification (CH48 to CH55).

LC48 (924.8Mhz) … LC55 (926.2Mhz)
+ LC70 (925.5Mhz)

AU 915MHz (8 channels: CH56-CH63) / AU915_8channels_Block8

This 8-channels RF Region applies to Australia, New Zealand and some Latin American countries where the ISM band extends from 915 to 928 MHz. The channel plan consists of the eighth block of 8 channels defined by LoRaWAN® specification (CH56 to CH63).

LC56 (926.4Mhz) … LC63 (927.8Mhz)
+ LC71 (927.1Mhz)

AS 923Mhz (AS923)

RF Region Name/ RF Region IDDescriptionEligible countries (ISO Alpha-2 country code)RF channelsRX1/RX2 settings
Taiwan 923MHz (16 channels) / AS923_Taiwan_16channels

This 16-channels RF Region applies to Taiwan & Hong Kong where the ISM band extends from 920 to 925 MHz. The LoRaWAN® Base Station must support 16-channels.

HK, TW

920.4 … 922.4Mhz + 923.0 … 923.8Mhz (200Khz channel spacing)

RX1DROffset = 0.

RX2 Frequency = 923.2Mhz.

RX2 data rate = DR2 (SF10).

Generic 8-channels Asian profile [922-924 MHz] / AS923_8channels_922_924

This RF Region applies to Asian, Latin American and Oceanian countries whose ISM band includes the 922 to 924MHz frequency range.

AU, BN, BO, CR, EC, NZ,  PA, PE, PY, SG, SV, TH, UY

922.0 … 923.4Mhz (200Khz channel spacing)

RX1DROffset = 0.

 

RX2 Frequency = 923.6Mhz.

 

RX2 data rate = DR2 (SF10).

Generic 8-channels Asian profile [923-925 MHz] / AS923_8channels_923_925

This RF Region applies to Asian, Latin American and Oceanian countries whose ISM band includes the 923 to 925MHz frequency range.

AU, BN, BO, CR, EC, KH, LA, NZ,  PA, PE, PY, SG, SV, TH, UG, UY

923.2 … 924.6Mhz (200Khz channel spacing)

RX1DROffset = 0.

 

RX2 Frequency = 923.6Mhz.

 

RX2 data rate = DR2 (SF10).

Generic 16-channels Asian profile [921-925 MHz] / AS923_16channels_921_925

This RF Region applies to Asian, Latin American and Oceanian countries whose ISM band includes the 921 to 925MHz frequency range.
The LoRaWAN® Base Station must support 16-channels.

AU, BN, BO, CR, EC, NZ,  PA, PE, PY, SG, SV, TH, UY

921.2 … 924.2Mhz (200Khz channel spacing)

RX1DROffset = 0.

 

RX2 Frequency = 923.6Mhz.

 

RX2 data rate = DR2 (SF10).

AS923 New Zealand Asymmetric 8-channels / AS923_8AsymChannels_4W

This RF Region applies to New Zealand and other Latin American countries whose ISM band includes the 923 to 927MHz frequency range with maximum allowed power of 4W. The channel plan configuration consists of 8 asymmetric channels, meaning downlink channels use different frequencies than uplink channels.

BO, NZ, PA, SV, UY

UL: 922.0 … 923.4Mhz
DL RX1: 925.0 … 926.4Mhz (200Khz channel spacing)

RX1DROffset = 0.

 

RX2 Frequency = 926.4Mhz.

 

RX2 data rate = DR2 (SF10).

AS923 Australia Asymmetric 8-channels / AS923_8AsymChannels_1W

This RF Region applies to Australia and other Latin American countries whose ISM band includes the 923 to 927MHz frequency range with maximum allowed power of 1W. The channel plan configuration consists of 8 asymmetric channels, meaning downlink channels use different frequencies than uplink channels.

AU, CR, EC, PE

UL: 922.0 … 923.4Mhz
DL RX1: 925.0 … 926.4Mhz (200Khz channel spacing)

RX1DROffset = 0.

 

RX2 Frequency = 926.4Mhz.

 

RX2 data rate = DR2 (SF10).

Japan 8-channels 20mW / AS923_Japan_20mW_8channels

This RF Region applies to Japan where the ISM band extends between 920 and 923.5 MHz, with maximum allowed conducted power of 20mW.

JP

922.0 … 923.4Mhz (200Khz channel spacing)

RX1DROffset = 2.

 

RX2 Frequency = 923.2Mhz.

 

RX2 data rate = DR2 (SF10).

Japan 15-channels 20mW / AS923_Japan_20mW_15channels

This RF Region applies to Japan where the ISM band extends between 920 and 923.5 MHz, with maximum allowed conducted power of 20mW. The LoRaWAN® Base Station must support 16-channels.

JP

920.6 … 923.4Mhz (200Khz channel spacing)

RX1DROffset = 2.

 

RX2 Frequency = 923.2Mhz.

 

RX2 data rate = DR2 (SF10).

Japan 8-channels 250mW / AS923_Japan_250mW_8channels

This RF Region applies to Japan where the ISM band extends between 920 and 923.5 MHz, with maximum allowed conducted power of 250mW.

JP

922.0 … 923.4Mhz (200Khz channel spacing)

RX1DROffset = 0.

 

RX2 Frequency = 923.2Mhz.

 

RX2 data rate = DR2 (SF10).

Japan 15-channels 250mW / AS923_Japan_250mW_15channels

This RF Region applies to Japan where the ISM band extends between 920 and 923.5 MHz, with maximum allowed conducted power of 250mW. The LoRaWAN® Base Station must support 16-channels.

JP

920.6 … 923.4Mhz (200Khz channel spacing)

RX1DROffset = 0.

 

RX2 Frequency = 923.2Mhz.

 

RX2 data rate = DR2 (SF10).

AS923 Australia symmetric 8-channels / AS923_Australia_8channels

This RF Region applies to Australia and other Latin American countries whose ISM band includes the 923 to 927MHz frequency range with maximum allowed power of 1W. The channel plan configuration consists of 8 symmetric channels meaning downlink channels use the same frequencies as uplink channels.

AU, CR, EC, PE

922.0 … 923.4Mhz (200Khz channel spacing)

RX1DROffset = 0.

 

RX2 Frequency = 923.6Mhz.

 

RX2 data rate = DR2 (SF10).

AS923 Australia symmetric 16-channels / AS923_Australia_16channels

This RF Region applies to Australia and other Latin American countries whose ISM band includes the 923 to 927MHz frequency range with maximum allowed power of 1W. The channel plan configuration consists of 16 symmetric channels meaning downlink channels use the same frequencies as uplink channels.

AU, CR, EC, PE

922.0 … 925.0Mhz (200Khz channel spacing)

RX1DROffset = 0.

 

RX2 Frequency = 923.6Mhz.

 

RX2 data rate = DR2 (SF10).

AS923 New Zealand symmetric 8-channels / AS923_NewZealand_8channels

This RF Region applies to New Zealand and other Latin American countries whose ISM band includes the 923 to 927MHz frequency range with maximum allowed power of 1W. The channel plan configuration consists of 8 symmetric channels meaning downlink channels use the same frequencies as uplink channels.

BO, NZ, PA, SV, UY

922.0 … 923.4Mhz (200Khz channel spacing)

RX1DROffset = 0.

 

RX2 Frequency = 923.6Mhz.

 

RX2 data rate = DR2 (SF10).

AS923 New Zealand symmetric 16-channels / AS923_NewZealand_16channels

This RF Region applies to New Zealand and other Latin American countries whose ISM band includes the 923 to 927MHz frequency range with maximum allowed power of 1W. The channel plan configuration consists of 16 symmetric channels meaning downlink channels use the same frequencies as uplink channels.

BO, NZ, PA, SV, UY

922.0 … 925.0Mhz (200Khz channel spacing)

RX1DROffset = 0.

 

RX2 Frequency = 923.6Mhz.

 

RX2 data rate = DR2 (SF10).

AS923-2 Vietnam 8-channels / AS923-2_Vietnam_8channels

This RF Region applies to Vietnam (919-923MHz frequency range). The channel plan configuration consists of 8 symmetric channels, based on AS923-2 regional profile.

VN

921.4 … 922.8Mhz (200Khz channel spacing)

RX1DROffset = 0.

 

RX2 Frequency = 921.4Mhz.

 

RX2 data rate = DR2 (SF10).

AS923-2 Vietnam 16-channels / AS923-2_Vietnam_16channels

This RF Region applies to Vietnam (919-923MHz frequency range). The channel plan configuration consists of 16 symmetric channels, based on AS923-2 regional profile.

VN

919.8 … 922.8Mhz (200Khz channel spacing)

AS923-2 Indonesia 8-channels / AS923-2_Indonesia_8channels

This RF Region applies to Indonesia (910-923MHz frequency range). The channel plan configuration consists of 8 symmetric channels, based on AS923-2 regional profile.

ID

921.4 … 922.8Mhz (200Khz channel spacing)

AS923-2 Indonesia 14-channels / AS923-2_Indonesia_14channels

This RF Region applies to Indonesia (910-923MHz frequency range). The channel plan configuration consists of 14 symmetric channels, based on AS923-2 regional profile.

ID

920.2 … 922.8Mhz (200Khz channel spacing)

AS923 Malaysia 8-channels / AS923_Malaysia_8channels

This RF Region applies to Malaysia (919-924MHz frequency range). The channel plan configuration consists of 8 symmetric channels, based on AS923-1 regional profile.

MY

921.9 … 922.9Mhz + 923.2 … 923.4Mhz (200Khz channel spacing)

RX1DROffset = 0.

 

RX2 Frequency = 921.7Mhz.

 

RX2 data rate = DR2 (SF10).

AS923 Malaysia 16-channels / AS923_Malaysia_16channels

This RF Region applies to Malaysia (919-924MHz frequency range). The channel plan configuration consists of 16 symmetric channels, based on AS923-1 regional profile.

MY

920.7 … 922.9Mhz + 923.2 … 923.8Mhz (200Khz channel spacing)

RX1DROffset = 0.

 

RX2 Frequency = 921.7Mhz.

 

RX2 data rate = DR2 (SF10).

AS923-4 Israel 8-channels / AS923-4_Israel_8channels

This RF Region applies to Israel (917-920MHz frequency range). The channel plan configuration consists of 8 symmetric channels, based on AS923-4 regional profile.

IL

917.3 … 918.7Mhz (200Khz channel spacing)

RX1DROffset = 0.

 

RX2 Frequency = 919.1Mhz.

 

RX2 data rate = DR2 (SF10).

AS923-4 Israel 13-channels / AS923-4_Israel_13channels

This RF Region applies to Israel (917-920MHz frequency range). The channel plan configuration consists of 13 symmetric channels, based on AS923-4 regional profile.

IL

917.3 … 918.9Mhz + 919.3 … 919.9Mhz (200Khz channel spacing)

RX1DROffset = 0.

 

RX2 Frequency = 919.1Mhz.

 

RX2 data rate = DR2 (SF10).

AS923 Singapore 8-channels / AS923_Singapore_8channels

This RF Region applies to Singapore (920-925 MHz frequency range). The channel plan configuration consists of 8 symmetric channels, based on AS923-1 regional profile.

SG

922.0 … 923.4Mhz (200Khz channel spacing)

RX1DROffset = 0.

 

RX2 Frequency = 923.6Mhz.

 

RX2 data rate = DR2 (SF10).

AS923 Singapore 16-channels / AS923_Singapore_16channels

This RF Region applies to Singapore (920-925 MHz frequency range). The channel plan configuration consists of 16 symmetric channels, based on AS923-1 regional profile.

SG

921.2 … 924.2Mhz (200Khz channel spacing)

RX1DROffset = 0.

 

RX2 Frequency = 923.6Mhz.

 

RX2 data rate = DR2 (SF10).

AS923 Hong Kong 8-channels / AS923_Hong-Kong_8channels

This RF Region applies to Hong Kong (920-925 MHz frequency range). The channel plan configuration consists of 8 symmetric channels, based on AS923-1 regional profile.

HK

922.0 … 923.4Mhz (200Khz channel spacing)

RX1DROffset = 0.

 

RX2 Frequency = 923.6Mhz.

 

RX2 data rate = DR2 (SF10).

Russia 864-870Mhz (RU864)

RF Region Name/ RF Region IDDescriptionEligible countries (ISO Alpha-2 country code)RF channelsRX1/RX2 settings
Russia 868MHz (7 channels) / RU864_Russia_7channels

This 7-channels RF Region applies to Russian ISM band. It is compatible with pico/nano base stations (using v1.x reference design).

RU

866.1 … 866.9Mhz + 868.9 … 869.1Mhz (200Khz channel spacing)

RX1DROffset = 2.

 

RX2 Frequency = 869.1Mhz.

 

RX2 data rate = DR3 (SF9).

Russia 868MHz (12channels) / RU864_Russia_12channels

This 12-channels RF Region applies to Russian ISM band. It is compatible with macro base stations (using v2.x reference design).

RU

866.1 … 867.9Mhz + 868.9 … 869.1Mhz (200Khz channel spacing)

RX1DROffset = 2.

 

RX2 Frequency = 869.1Mhz.

 

RX2 data rate = DR3 (SF9).

India 865-867Mhz (IN865)

RF Region Name/ RF Region IDDescriptionEligible countries (ISO Alpha-2 country code)RF channelsRX1/RX2 settings
India 865MHz / IN865_8channelsThis 8-channels RF Region applies to India where the ISM band extends from 865 to 867 MHz.IN865.0625, 865.4025, 865.9850, 865.2325, 865.5725, 865.84, 866.13, 866.275Mhz

RX1DROffset = 0.

 

RX2 Frequency = 866.550Mhz.

 

RX2 data rate = DR3 (SF9).

Korea 920-923Mhz (KR920)

RF Region Name/ RF Region IDDescriptionEligible countries (ISO Alpha-2 country code)RF channelsRX1/RX2 settings

South Korea 920MHz (7 channels) / KR920_7SymChannels

This RF Region applies to South Korea where the ISM band extends from 917 to 923.5 MHz.KR921.9 … 923.3Mhz (200Khz channel spacing)

RX1DROffset = 0.

 

RX2 Frequency = 921.9Mhz.

 

RX2 data rate = DR3 (SF9).

EU433Mhz (EU433)

RF Region Name/ RF Region IDDescriptionEligible countries (ISO Alpha-2 country code)RF channelsRX1/RX2 settings
EU 433MHz / EU433This RF Region applies to any region where the use of the 433 MHz ISM radio spectrum is compliant with the ETSI EN300.220 standard.AD, AE, AL, AM, AT, AZ, BA, BD, BE, BG, BN, BY, CU, CY, CZ, DE, DK, DZ, EE, EG, ES, FR, FI, GB, GR, HK, HU, NL, HR, IE, IL, IR, IS, IT, KW, KZ, LB, LI, LK, LT, LU, LV, MA, MD, ME, MK, MM, MT, MY, NO, NZ, OM, PH, PL, PT, PY, QA, RO, RS, CH, SA, SG, SK, SI, TH, TN, TR, UA, UG, UZ, ZA433.175 … 434.375Mhz (200Khz channel spacing)

RX1DROffset = 2.

 

RX2 Frequency = 434.665Mhz.

 

RX2 data rate = DR2 (SF10).