Adding a direct IP mode destination
It consists in adding an ASR address that will route the packets to a server.
The information is provided by the supplier of the application server router.
Required |
---|
ASR address |
Before you begin
-
You must have read-write access to Device Manager. For more information, see Opening a panel and checking your read-write access.
-
The cellular AS routing profile must be opened in edit mode.
-
In the AS routing profile frame, select Direct IP only from the Mode list.
-> The AS routing profile panel appears with direct IP mode configuration.
-
In the Direct IP mode destinations frame, enter in the ASR address box the IPv4 address of the application server router.
-
Click Save.
->The Status frame is updated with your last modifications.
->The cellular AS routing profile in direct IP mode is ready to be allocated to a cellular device:
-
Either when creating the device.
For more information, see Creating devices. -
Or after you have created the device.
For more information, see Managing the AS routing profile of a device or Changing the AS routing profile.
-