Skip to main content

Drivers 5.2.0 · Device profiles 9.2.0

Published on 2026-09-29.

Breaking changes​

An integration reading these points may need to be adapted.

Point fields that change​

DriverWhat changes
b-meters:iwm-lrx:1valueCounter and reverseFlowCounter now report the correct BCD-decoded index instead of the previous, inflated raw-binary interpretation.

Drivers​

abeeway​

DriverChangeWhat changed
abeeway:asset-tracker-3:1updatedAsset Tracker 3 driver 3.2.28: firmware v1.6 support — Hend Affes (Abeeway), 2026-09-25. Accelerometer: GADD index read on 1 byte (v1.5) or 4 bytes (v1.6+), numberShocks offset updated accordingly. Position: type mask widened from 0x0F to 0x1F (5-bit field in v1.6). Parameters: cell_lpm_recovery_timeout, ble_scan_presence_period and ble_scan_presence_max_time added, ble_scan_nb_beacons maximum raised to 100. System: AOS_ERROR_HW_SWDOG reset cause. Seven v1.6 examples added; the decoded output of the existing examples is unchanged, v1.5 frames decode as before.
spt-abee:compact-tracker:1addedAdd the SPOT driver for Abeeway V3 (profile 793), linked to abeeway:compact-tracker:1 — Imported from device-catalog-spot (abeeway/compact-tracker-copy) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 793 (10 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to abeeway:compact-tracker:1, so the model's default driver is unchanged.

adeunis​

DriverChangeWhat changed
spt-adeu:analog-589:1addedimport the SPOT ARF8190BA driver (SPOT profile 589) — Imported from device-catalog-spot with the SPOT computed attributes already applied, keyed on SPOT profile 589. Extends the deviceEUI to modelId/protocolId resolution chain beyond the first pilot batch. Not yet referenced by any public model.yaml. No payload sample exists in the SPOT source, so the driver ships without an example and is not covered by the driver tests.
spt-adeu:analog-pwr-195:1addeduplink decoder of the Adeunis Analog PWR — Decoder of the Adeunis Analog PWR (adeunis:analog-pwr:1). No payload example is available yet, so the driver ships without an example and is not covered by the driver tests.
spt-adeu:analog-pwr:1addeduplink decoder of the Adeunis Analog PWR — Decoder of the Adeunis Analog PWR (adeunis:analog-pwr:1), for its recent firmware. No payload example is available yet, so the driver ships without an example and is not covered by the driver tests.
spt-adeu:analog:1addedimport the SPOT ARF8190BA driver (SPOT profile 194) — Imported from device-catalog-spot with the SPOT computed attributes already applied, keyed on SPOT profile 194. Extends the deviceEUI to modelId/protocolId resolution chain beyond the first pilot batch. Not yet referenced by any public model.yaml.
spt-adeu:comfort-554:1addedimport the SPOT ARF8275AA driver (SPOT profile 554) — Imported from device-catalog-spot with the SPOT computed attributes already applied, keyed on SPOT profile 554. Extends the deviceEUI to modelId/protocolId resolution chain beyond the first pilot batch. Not yet referenced by any public model.yaml.
spt-adeu:comfort-co2-730:1addedAdd the SPOT driver for Adeunis Comfort co2 (profile 730), linked to adeunis:comfort-co2:1 — Imported from device-catalog-spot (adeunis/comfort-co2) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 730 (522 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to adeunis:comfort-co2:1, so the model's default driver is unchanged.
spt-adeu:comfort-time-620:1addedAdd the SPOT driver for Adeunis ARF8275AA (profile 620), linked to adeunis:comfort:1 — Imported from device-catalog-spot (adeunis/comfort-timestamp-histo15min-tx4h-copy) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 620 (104 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to adeunis:comfort:1, so the model's default driver is unchanged.
spt-adeu:comfort-v2-725:1addedAdd the SPOT driver for Adeunis COMFORT V2 (profile 725), linked to adeunis:comfort-co2:1 — Imported from device-catalog-spot (adeunis/comfort-v2-copy) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 725 (1 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to adeunis:comfort-co2:1, so the model's default driver is unchanged.
spt-adeu:comfort-v2-h-688:1addedAdd the SPOT driver for Adeunis COMFORT V2 (profile 688), linked to adeunis:comfort:2 — Imported from device-catalog-spot (adeunis/comfort-v2-histo10min-tx1h) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 688 (354 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to adeunis:comfort:2, so the model's default driver is unchanged.
spt-adeu:comfort-v2-h-700:1addedAdd the SPOT driver for Adeunis COMFORT V2 (profile 700), linked to adeunis:comfort:2 — Imported from device-catalog-spot (adeunis/comfort-v2-histo15min-tx4h-copy) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 700 (76 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to adeunis:comfort:2, so the model's default driver is unchanged.
spt-adeu:comfort:1addedimport the SPOT ARF8275AA driver (SPOT profile 411) — Imported from device-catalog-spot with the SPOT computed attributes already applied, keyed on SPOT profile 411. Extends the deviceEUI to modelId/protocolId resolution chain beyond the first pilot batch. Not yet referenced by any public model.yaml.
spt-adeu:dry-contacts-591:1addedimport the SPOT ARF8170BA driver (SPOT profile 591) — Imported from device-catalog-spot with the SPOT computed attributes already applied, keyed on SPOT profile 591. Extends the deviceEUI to modelId/protocolId resolution chain beyond the first pilot batch. Not yet referenced by any public model.yaml.
spt-adeu:dry-contacts-724:1addedAdd the SPOT driver for Adeunis DRY V2 IP67 (profile 724), linked to adeunis:dry-contacts:2 — Imported from device-catalog-spot (adeunis/dry-contacts-copy-1) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 724 (43 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to adeunis:dry-contacts:2, so the model's default driver is unchanged.
spt-adeu:dry-contacts:1addedimport the SPOT ARF8170BA driver (SPOT profile 197) — Imported from device-catalog-spot with the SPOT computed attributes already applied, keyed on SPOT profile 197. Extends the deviceEUI to modelId/protocolId resolution chain beyond the first pilot batch. Not yet referenced by any public model.yaml.
spt-adeu:field-test-d-569:1addedAdd the SPOT driver for Adeunis ARF8123AA (profile 569), linked to adeunis:field-test:1 — Imported from device-catalog-spot (adeunis/field-test-device-copy) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 569 (13 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to adeunis:field-test:1, so the model's default driver is unchanged.
spt-adeu:field-test-d-575:1addedAdd the SPOT driver for Adeunis ARF8123AA (profile 575), linked to adeunis:field-test:1 — Imported from device-catalog-spot (adeunis/field-test-device-copy-copy-copy) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 575 (15 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to adeunis:field-test:1, so the model's default driver is unchanged.
spt-adeu:field-test:1addedAdd the SPOT driver for Adeunis ARF8123AA (profile 1, 574, 570), linked to adeunis:field-test:1 — Imported from device-catalog-spot (adeunis/field-test-device-copy-copy-1) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 1, 574, 570 (233 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Also serves profile 1, 570, which shares its codec and computed attributes (2026-09-28). Linked last to adeunis:field-test:1, so the model's default driver is unchanged.
spt-adeu:modbus-415:1addedimport the SPOT ARF8240AA driver (SPOT profile 415) — Imported from device-catalog-spot with the SPOT computed attributes already applied, keyed on SPOT profile 415. Extends the deviceEUI to modelId/protocolId resolution chain beyond the first pilot batch. Not yet referenced by any public model.yaml.
spt-adeu:modbus-451:1addedimport the SPOT ARF8240AA driver (SPOT profile 451) — Imported from device-catalog-spot with the SPOT computed attributes already applied, keyed on SPOT profile 451. Extends the deviceEUI to modelId/protocolId resolution chain beyond the first pilot batch. Not yet referenced by any public model.yaml.
spt-adeu:modbus-arf82-530:1addedAdd the SPOT driver for Adeunis ARF8240AA (profile 530), linked to adeunis:modbus:1 — Imported from device-catalog-spot (adeunis/modbus-arf8240aa-copy) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 530 (99 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to adeunis:modbus:1, so the model's default driver is unchanged.
spt-adeu:modbus-v2-596:1addedAdd the SPOT driver for Adeunis ARF8240AA (profile 596), linked to adeunis:modbus:1 — Imported from device-catalog-spot (adeunis/modbus-v2) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 596 (23 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to adeunis:modbus:1, so the model's default driver is unchanged.
spt-adeu:modbus:1addedimport the SPOT ARF8240AA driver (SPOT profile 201) — Imported from device-catalog-spot with the SPOT computed attributes already applied, keyed on SPOT profile 201. Extends the deviceEUI to modelId/protocolId resolution chain beyond the first pilot batch. Not yet referenced by any public model.yaml. No payload sample exists in the SPOT source, so the driver ships without an example and is not covered by the driver tests.
spt-adeu:motion:1addedimport the SPOT ARF8276AA driver (SPOT profile 412) — Imported from device-catalog-spot with the SPOT computed attributes already applied, keyed on SPOT profile 412. Extends the deviceEUI to modelId/protocolId resolution chain beyond the first pilot batch. Not yet referenced by any public model.yaml.
spt-adeu:pulse-v1-2:1addeduplink decoder of the Adeunis Pulse Sensor V1 — Decoder of the Adeunis Pulse Sensor V1 (adeunis:pulse-v1:1). No payload example is available yet, so the driver ships without an example and is not covered by the driver tests.
spt-adeu:pulse-v2-408:1addedimport the SPOT ARF8230FA driver (SPOT profile 408) — Imported from device-catalog-spot with the SPOT computed attributes already applied, keyed on SPOT profile 408. Extends the deviceEUI to modelId/protocolId resolution chain beyond the first pilot batch. Not yet referenced by any public model.yaml.
spt-adeu:pulse-v2:1addedimport the SPOT ARF8230AA driver (SPOT profile 199) — Imported from device-catalog-spot with the SPOT computed attributes already applied, keyed on SPOT profile 199. Extends the deviceEUI to modelId/protocolId resolution chain beyond the first pilot batch. Not yet referenced by any public model.yaml.
spt-adeu:pulse-v4-his-690:1addedAdd the SPOT driver for Adeunis Pulse V4 (profile 690), linked to adeunis:pulse:4 — Imported from device-catalog-spot (adeunis/pulse-v4-histo10min-tx1h) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 690 (34 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to adeunis:pulse:4, so the model's default driver is unchanged.
spt-adeu:pulse-v4-his-691:1addedAdd the SPOT driver for Adeunis Pulse V4 (profile 691), linked to adeunis:pulse:4 — Imported from device-catalog-spot (adeunis/pulse-v4-histo10min-tx1h-copy) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 691 (13 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to adeunis:pulse:4, so the model's default driver is unchanged.
spt-adeu:temp-200:1addedimport the SPOT ARF8180BA driver (SPOT profile 200) — Imported from device-catalog-spot with the SPOT computed attributes already applied, keyed on SPOT profile 200. Extends the deviceEUI to modelId/protocolId resolution chain beyond the first pilot batch. Not yet referenced by any public model.yaml.
spt-adeu:temp-3-2s-509:1addedAdd the SPOT driver for Adeunis ARF8180BA2D (profile 509), linked to adeunis:temp:2 — Imported from device-catalog-spot (adeunis/temp-3-2s) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 509 (58 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to adeunis:temp:2, so the model's default driver is unchanged.
spt-adeu:temp-3-2s-557:1addedAdd the SPOT driver for Adeunis ARF8180BA2D (profile 557), linked to adeunis:temp:2 — Imported from device-catalog-spot (adeunis/temp-3-2s-copy) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 557 (48 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to adeunis:temp:2, so the model's default driver is unchanged.
spt-adeu:temp-439:1addedimport the SPOT ARF8180BA2D driver (SPOT profile 439) — Imported from device-catalog-spot with the SPOT computed attributes already applied, keyed on SPOT profile 439. Extends the deviceEUI to modelId/protocolId resolution chain beyond the first pilot batch. Not yet referenced by any public model.yaml.
spt-adeu:temp-v4-2s-h-702:1addedAdd the SPOT driver for Adeunis TEMP V4 (profile 702), linked to adeunis:temp:4 — Imported from device-catalog-spot (adeunis/temp-v4-2s-histo15min-tx2h-copy) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 702 (76 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to adeunis:temp:4, so the model's default driver is unchanged.
spt-adeu:temp:1addedimport the SPOT ARF8180BA driver (SPOT profile 179) — Imported from device-catalog-spot with the SPOT computed attributes already applied, keyed on SPOT profile 179. Extends the deviceEUI to modelId/protocolId resolution chain beyond the first pilot batch. Not yet referenced by any public model.yaml. No payload sample exists in the SPOT source, so the driver ships without an example and is not covered by the driver tests.
spt-adeu:tic-v2-592:1addedAdd the SPOT driver for Adeunis ARF8250AC (profile 592, 455), linked to adeunis:tic:1 — Imported from device-catalog-spot (adeunis/tic-v2-copy) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 592, 455 (380 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Also serves profile 455, which shares its codec and computed attributes (2026-09-28). Linked last to adeunis:tic:1, so the model's default driver is unchanged.

agoraopinion​

DriverChangeWhat changed
spt-agor:agora-21:1addeduplink decoder of the Taqt Agora 2.0 — Decoder of the Taqt Agora 2.0 (taqt:agora-2:1).
spt-agor:agora-79:1addeduplink decoder of the Taqt Agora 2.0 — Decoder of the Taqt Agora 2.0 (taqt:agora-2:1).

atim​

DriverChangeWhat changed
atim:cts:1addedATIM ACW-CTS self-powered current and temperature sensor: per-product driver — New driver built from ATIM's per-product decoder for the ACW-CTS self-powered current and temperature sensor, with its points and a BACnet/Modbus mapping. Defects of the vendor code fixed on our side: numbers instead of comma-separated strings, ISO 8601 UTC timestamps, no implicit globals, a single encodeDownlink. atim:generic:1 stays available as the second protocolId of the model.
atim:dind21:1addedATIM ACW-DIND21, 2 dry contact or pulse inputs and 1 output: per-product driver — New driver built from ATIM's per-product decoder for the ACW-DIND21, 2 dry contact or pulse inputs and 1 output, with its points and a BACnet/Modbus mapping. Defects of the vendor code fixed on our side: numbers instead of comma-separated strings, ISO 8601 UTC timestamps, no implicit globals, a single encodeDownlink. atim:generic:1 stays available as the second protocolId of the model.
atim:dind88:1addedATIM ACW-DIND44 and ACW-DIND88, up to 8 inputs and 8 outputs, with the 4-20 mA input: per-product driver — New driver built from ATIM's per-product decoder for the ACW-DIND44 and ACW-DIND88, up to 8 inputs and 8 outputs, with the 4-20 mA input, with its points and a BACnet/Modbus mapping. Defects of the vendor code fixed on our side: numbers instead of comma-separated strings, ISO 8601 UTC timestamps, no implicit globals, a single encodeDownlink. atim:generic:1 stays available as the second protocolId of the model.
atim:gaug:1addedATIM ACW-GAUG tank level gauge: per-product driver — New driver built from ATIM's per-product decoder for the ACW-GAUG tank level gauge, with its points and a BACnet/Modbus mapping. Defects of the vendor code fixed on our side: numbers instead of comma-separated strings, ISO 8601 UTC timestamps, no implicit globals, a single encodeDownlink. atim:generic:1 stays available as the second protocolId of the model.
atim:mr2-ex:1addedATIM ACW-MR2-EX ATEX pulse metering, 2 inputs: per-product driver — New driver built from ATIM's per-product decoder for the ACW-MR2-EX ATEX pulse metering, 2 inputs, with its points and a BACnet/Modbus mapping. Defects of the vendor code fixed on our side: numbers instead of comma-separated strings, ISO 8601 UTC timestamps, no implicit globals, a single encodeDownlink. atim:generic:1 stays available as the second protocolId of the model.
atim:mr4-opto:1addedATIM ACW-MR4-OPTO optical meter reading: per-product driver — New driver built from ATIM's per-product decoder for the ACW-MR4-OPTO optical meter reading, with its points and a BACnet/Modbus mapping. Defects of the vendor code fixed on our side: numbers instead of comma-separated strings, ISO 8601 UTC timestamps, no implicit globals, a single encodeDownlink. atim:generic:1 stays available as the second protocolId of the model.
atim:mr4:1addedATIM ACW-MR4 pulse metering and dry contacts, 4 inputs: per-product driver — New driver built from ATIM's per-product decoder for the ACW-MR4 pulse metering and dry contacts, 4 inputs, with its points and a BACnet/Modbus mapping. Defects of the vendor code fixed on our side: numbers instead of comma-separated strings, ISO 8601 UTC timestamps, no implicit globals, a single encodeDownlink. atim:generic:1 stays available as the second protocolId of the model.
atim:pir:1addedATIM ACW-PIR motion detector and ACW-ILB photoelectric barrier: per-product driver — New driver built from ATIM's per-product decoder for the ACW-PIR motion detector and ACW-ILB photoelectric barrier, with its points and a BACnet/Modbus mapping. Defects of the vendor code fixed on our side: numbers instead of comma-separated strings, ISO 8601 UTC timestamps, no implicit globals, a single encodeDownlink. atim:generic:1 stays available as the second protocolId of the model.
atim:ptmxp:1addedATIM ACW-PTMxP differential pressure and PT1000 temperature: per-product driver — New driver built from ATIM's per-product decoder for the ACW-PTMxP differential pressure and PT1000 temperature, with its points and a BACnet/Modbus mapping. Defects of the vendor code fixed on our side: numbers instead of comma-separated strings, ISO 8601 UTC timestamps, no implicit globals, a single encodeDownlink. atim:generic:1 stays available as the second protocolId of the model.
atim:tcr:1addedATIM ACW-TCR cold room probe, instant and inertial temperature: per-product driver — New driver built from ATIM's per-product decoder for the ACW-TCR cold room probe, instant and inertial temperature, with its points and a BACnet/Modbus mapping. Defects of the vendor code fixed on our side: numbers instead of comma-separated strings, ISO 8601 UTC timestamps, no implicit globals, a single encodeDownlink. atim:generic:1 stays available as the second protocolId of the model.
atim:thaq:1addedATIM ACW-THAQ indoor air quality: temperature, humidity, CO2, VOC: per-product driver — New driver built from ATIM's per-product decoder for the ACW-THAQ indoor air quality: temperature, humidity, CO2, VOC, with its points and a BACnet/Modbus mapping. Defects of the vendor code fixed on our side: numbers instead of comma-separated strings, ISO 8601 UTC timestamps, no implicit globals, a single encodeDownlink. atim:generic:1 stays available as the second protocolId of the model.
atim:thx:1addedATIM ACW-THX indoor and outdoor temperature and humidity: per-product driver — New driver built from ATIM's per-product decoder for the ACW-THX indoor and outdoor temperature and humidity, with its points and a BACnet/Modbus mapping. Defects of the vendor code fixed on our side: numbers instead of comma-separated strings, ISO 8601 UTC timestamps, no implicit globals, a single encodeDownlink. atim:generic:1 stays available as the second protocolId of the model.
atim:tmxp:1addedATIM ACW-TMxP PT100/PT1000 temperature transmitter: per-product driver — New driver built from ATIM's per-product decoder for the ACW-TMxP PT100/PT1000 temperature transmitter, with its points and a BACnet/Modbus mapping. Defects of the vendor code fixed on our side: numbers instead of comma-separated strings, ISO 8601 UTC timestamps, no implicit globals, a single encodeDownlink. atim:generic:1 stays available as the second protocolId of the model.
atim:wlk:1addedATIM ACW-WLK liquid detection cable: per-product driver — New driver built from ATIM's per-product decoder for the ACW-WLK liquid detection cable, with its points and a BACnet/Modbus mapping. Defects of the vendor code fixed on our side: numbers instead of comma-separated strings, ISO 8601 UTC timestamps, no implicit globals, a single encodeDownlink. atim:generic:1 stays available as the second protocolId of the model.
spt-atim:acw-dindxxx-671:1addedAdd the SPOT driver for Atim ACW/DIND160 (profile 671), linked to atim:dry-contact-i:1 — Imported from device-catalog-spot (atim/acw-dindxxx) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 671 (3 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to atim:dry-contact-i:1, so the model's default driver is unchanged.
spt-atim:acw-lw8-thaq-765:1addedAdd the SPOT driver for Atim ACW/LW8-THAQ (profile 765), linked to atim:air-quality:1 — Imported from device-catalog-spot (atim/acw-lw8-thaq) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 765 (409 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to atim:air-quality:1, so the model's default driver is unchanged.

b-meters​

DriverChangeWhat changed
b-meters:iwm-lrx:1updatedFix valueCounter/reverseFlowCounter decoding (BCD, not raw binary) — The absolute and reverse-flow counters are 4-byte BCD fields sent least-significant-byte first, confirmed against the vendor's official payload documentation. The driver was reading them as plain little-endian binary integers, inflating the reported index (e.g. 86423 instead of the correct 15197 for the same frame). Both counters are now decoded as BCD.

diehl-metering​

DriverChangeWhat changed
spt-dieh:hrlc-g3-428:1addedAdd the SPOT driver for DIEHL METERING HRLc-G3 (profile 428), linked to diehl:hrlc-g3:1 — Imported from device-catalog-spot (diehl-metering/hrlc-g3) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 428 (360 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to diehl:hrlc-g3:1, so the model's default driver is unchanged.

digital-matter​

DriverChangeWhat changed
spt-digm:oyster:1addedAdd the SPOT driver for Digital Matter Oyster (profile 531), linked to digi-mat:oyster:60 — Imported from device-catalog-spot (digital-matter/oyster) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 531 (2 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to digi-mat:oyster:60, so the model's default driver is unchanged.

eco-adapt​

DriverChangeWhat changed
spt-ecoa:power-elec-6:1addedimport the SPOT Power Elec 6 driver — Imported from device-catalog-spot with the SPOT computed attributes already applied. Extends the deviceEUI to modelId/protocolId resolution chain beyond the first pilot batch. Not yet referenced by any public model.yaml.

efsys​

DriverChangeWhat changed
spt-efsy:relais-lora-495:1addeduplink decoder of the EFSYS Relais LoRa — Decoder of the EFSYS Relais LoRa (efsys:relais-lora:1). No payload example is available yet, so the driver ships without an example and is not covered by the driver tests.

elsys​

DriverChangeWhat changed
spt-elsy:elsys-ers-132:1addedAdd the SPOT driver for Elsys ERS (profile 132), linked to elsys:ers-co2:1 — Imported from device-catalog-spot (elsys/elsys-ers) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 132 (2044 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to elsys:ers-co2:1, so the model's default driver is unchanged.
spt-elsy:elt-2-593:1addedAdd the SPOT driver for Elsys ELT-2 (profile 593), linked to elsys:elt-2:1 — Imported from device-catalog-spot (elsys/elt-2) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 593 (11 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to elsys:elt-2:1, so the model's default driver is unchanged.
spt-elsy:ers-co2:1addedAdd the SPOT driver for Elsys ERS (profile 656), linked to elsys:ers:1 — Imported from device-catalog-spot (elsys/ers-co2-copy) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 656 (720 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to elsys:ers:1, so the model's default driver is unchanged.

elvaco​

DriverChangeWhat changed
spt-elva:cmi4130-676:1addeduplink decoder of the Elvaco CMi4130 — Decoder of the Elvaco CMi4130 (elvaco:cmi4130:1).
spt-elva:cmi4140-672:1addeduplink decoder of the Elvaco CMi4140 — Decoder of the Elvaco CMi4140 (elvaco:cmi4140:1).
spt-elva:cmi4160-677:1addedAdd the SPOT driver for Elvaco CMi4160 (profile 677), linked to elvaco:cmi4160:1 — Imported from device-catalog-spot (elvaco/cmi4160) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 677 (69 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to elvaco:cmi4160:1, so the model's default driver is unchanged.

enless-wireless​

DriverChangeWhat changed
spt-enle:transmetteur-608:1addedAdd the SPOT driver for Enless Wireless TX T&H AMB 600-021 (profile 608), linked to enless-w:tx-amb-600-021:1 — Imported from device-catalog-spot (enless-wireless/transmetteur-de-temperature-et-humidite-d-ambiance) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 608 (56 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to enless-w:tx-amb-600-021:1, so the model's default driver is unchanged.
spt-enle:tx-temp-ins-600:1addedAdd the SPOT driver for Enless Wireless TX TEMP INS 600-031 (profile 600), linked to enless-w:600-031:1 — Imported from device-catalog-spot (enless-wireless/tx-temp-ins-600-031) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 600 (12 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to enless-w:600-031:1, so the model's default driver is unchanged.

eolane​

DriverChangeWhat changed
spt-eola:bob-assistant:1addedAdd the SPOT driver for Eolane Bob Assistant (profile 384), linked to eolane:bob:1 — Imported from device-catalog-spot (eolane/bob-assistant) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 384 (19 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to eolane:bob:1, so the model's default driver is unchanged.
spt-eola:movee-488:1addedimport the SPOT Movee driver (SPOT profile 488) — Imported from device-catalog-spot with the SPOT computed attributes already applied, keyed on SPOT profile 488. Extends the deviceEUI to modelId/protocolId resolution chain beyond the first pilot batch. Not yet referenced by any public model.yaml.
spt-eola:movee-53:1addedimport the SPOT Movee driver (SPOT profile 53) — Imported from device-catalog-spot with the SPOT computed attributes already applied, keyed on SPOT profile 53. Extends the deviceEUI to modelId/protocolId resolution chain beyond the first pilot batch. Not yet referenced by any public model.yaml.

ineo-sense​

DriverChangeWhat changed
spt-ineo:acs-padlock:1addeduplink decoder of the Ineo-Sense ACS-Padlock — Decoder of the Ineo-Sense ACS-Padlock (ineosens:acs-padlock:1). No payload example is available yet, so the driver ships without an example and is not covered by the driver tests.
spt-ineo:acs-sw-range-686:1addeduplink decoder of the Ineo-Sense ACS-Switch-Range — Decoder of the Ineo-Sense ACS-Switch-Range (ineosens:acs-switch-range:1). No payload example is available yet, so the driver ships without an example and is not covered by the driver tests.
spt-ineo:acs-switch-534:1addeduplink decoder of the Ineo-Sense ACS-Switch-JCD — Decoder of the Ineo-Sense ACS-Switch-JCD (ineosens:acs-switch-jcd:1) and Ineo-Sense ACS-Switch (ineosens:acs-switch:1).
spt-ineo:trk-tracer-653:1addeduplink decoder of the Ineo-Sense TRK-Tracer-GPS — Decoder of the Ineo-Sense TRK-Tracer-GPS (ineosens:trk-tracer-gps:1).

ixel​

DriverChangeWhat changed
spt-ixel:loratic-136:1addeduplink decoder of the IXEL LoRaTIC — Decoder of the IXEL LoRaTIC (ixel:loratic:1).

jri​

DriverChangeWhat changed
spt-jrix:spy-smart-151:1addeduplink decoder of the JRI LoRa SPY — Decoder of the JRI LoRa SPY (jri:lora-spy:1). No payload example is available yet, so the driver ships without an example and is not covered by the driver tests.

lacroix​

DriverChangeWhat changed
spt-lacr:generic-787:1addeduplink decoder of the LACROIX Environment SOFREL IoT Sensor — Decoder of the LACROIX Environment SOFREL IoT Sensor (lacroix:sofrel-iot:1). No payload example is available yet, so the driver ships without an example and is not covered by the driver tests.

lacroix-environment​

DriverChangeWhat changed
spt-lacr:sofrel-t-723:1addeduplink decoder of the LACROIX Environment SOFREL IoT Sensor T° — Decoder of the LACROIX Environment SOFREL IoT Sensor T° (lacroix:sofrel-t:1).

mcf88​

DriverChangeWhat changed
spt-mcf8:lw12co2-566:1addedAdd the SPOT driver for MCF88 LW12CO2 (profile 566), linked to mcf88:mcf-lw12co2:1 — Imported from device-catalog-spot (mcf88/lw12co2) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 566 (1 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to mcf88:mcf-lw12co2:1, so the model's default driver is unchanged.

nano-sensorics​

DriverChangeWhat changed
nanosnsr:powersense:1addedAdd Nano sensorics PowerSense driver: energy counters, current and power demands, uplink interval downlink — Built from Nano sensorics' TTN decoder, corrected with the manufacturer's answers of 2026-09-23: numeric outputs instead of strings, S_DMP renamed apparentPowerDemand (S_DMD), device clock as local ISO-8601 time without offset, 51-byte fPort 10 frames only, explicit demand names and units. encodeDownlink/decodeDownlink set the uplink interval (1 to 10 or 15 minutes, Modbus RTU frames on fPort 10). Points on the ontology, BACnet/Modbus mapping with one R object per value and an RW uplink interval.

nemeus​

DriverChangeWhat changed
spt-neme:nis-ul-184:1addeduplink decoder of the Nemeus NIS-UL — Decoder of the Nemeus NIS-UL (nemeus:nis-ul:1). No payload example is available yet, so the driver ships without an example and is not covered by the driver tests.

nexelec​

DriverChangeWhat changed
spt-nexe:aero-729:1addeduplink decoder of the Nexelec Aero — Decoder of the Nexelec Aero (nexelec:aero:1).
spt-nexe:atmo-726:1addedAdd the SPOT driver for Nexelec Atmo (profile 726), linked to nexelec:atmo:1 — Imported from device-catalog-spot (nexelec/atmo) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 726 (24 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to nexelec:atmo:1, so the model's default driver is unchanged.
spt-nexe:insafe-carbo-561:1addedAdd the SPOT driver for Nexelec Carbon (profile 561), linked to nexelec:carbon:1 — Imported from device-catalog-spot (nexelec/insafe-carbon) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 561 (25 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to nexelec:carbon:1, so the model's default driver is unchanged.
spt-nexe:insafe-carbo-614:1addedAdd the SPOT driver for Nexelec Carbon (profile 614), linked to nexelec:carbon:1 — Imported from device-catalog-spot (nexelec/insafe-carbon-copy) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 614 (69 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to nexelec:carbon:1, so the model's default driver is unchanged.
spt-nexe:insafe-origi-754:1addedAdd the SPOT driver for Nexelec Origin (profile 754), linked to nexelec:insafe:1 — Imported from device-catalog-spot (nexelec/insafe-origin) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 754 (1 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to nexelec:insafe:1, so the model's default driver is unchanged.
spt-nexe:insafe-pilot-613:1addedAdd the SPOT driver for Nexelec Pilot (profile 613), linked to nexelec:pilot:1 — Imported from device-catalog-spot (nexelec/insafe-pilot-copy) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 613 (470 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to nexelec:pilot:1, so the model's default driver is unchanged.

nke-watteco​

DriverChangeWhat changed
spt-nkew:50-70-014-001:1addedSPOT computed attributes of profile 19 applied to the imported driver — Re-imported from device-catalog-spot after the SPOT team ported the rows of template_device_profile_computes_attributes.csv for profile 19 into the decoder. The driver now emits the same computed fields the SPOT platform produced for these devices, so a migrated device keeps the attribute names its integration already consumes. Decoding of the raw payload is unchanged.
spt-nkew:50-70-016-003:1addedimport the SPOT 50-70-016 driver (SPOT profile 23) — Imported from device-catalog-spot with the SPOT computed attributes already applied, keyed on SPOT profile 23. Extends the deviceEUI to modelId/protocolId resolution chain beyond the first pilot batch. Not yet referenced by any public model.yaml.
spt-nkew:clos-o:1addedAdd the SPOT driver for NKE Watteco 50-09-108 (profile 417), linked to watteco:closo:4 — Imported from device-catalog-spot (nke-watteco/clos-o) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 417 (1 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to watteco:closo:4, so the model's default driver is unchanged.
spt-nkew:flash-o-b-124:1addedAdd the SPOT driver for NKE Watteco Flash'O (profile 124), linked to watteco:flasho:4 — Imported from device-catalog-spot (nke-watteco/flash-o-copy-nkebatch) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 124 (94 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to watteco:flasho:4, so the model's default driver is unchanged.
spt-nkew:in-o-139:1addedimport the SPOT 50-70-087 driver (SPOT profile 139) — Imported from device-catalog-spot with the SPOT computed attributes already applied, keyed on SPOT profile 139. Extends the deviceEUI to modelId/protocolId resolution chain beyond the first pilot batch. Not yet referenced by any public model.yaml.
spt-nkew:in-o-copy1:1updatedRe-imported from device-catalog-spot: SPOT output envelope reworked upstream, decoded output unchanged — device-catalog-spot generalised a [{ timestamp, data, errors, warnings }] batch envelope and hex-string input (device-catalog-spot up to de8443e, 2026-09-28). The import adapter unwraps it to the { data, errors, warnings } envelope this catalog ships; the decoded output of every example is byte-identical to the deployed 1.0.0, and a decoding error is still reported as an error.
spt-nkew:in-o:1updatedSPOT computed attributes of profile 410 applied to the imported driver — Re-imported from device-catalog-spot after the SPOT team ported the rows of template_device_profile_computes_attributes.csv for profile 410 into the decoder. The driver now emits the same computed fields the SPOT platform produced for these devices, so a migrated device keeps the attribute names its integration already consumes. Decoding of the raw payload is unchanged.
spt-nkew:meteo-batch:1addedAdd the SPOT driver for NKE Watteco 71-70-053 (profile 399), linked to watteco:atmo:4 — Imported from device-catalog-spot (nke-watteco/station-meteo-connectee-copy-nkebatch) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 399 (49 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to watteco:atmo:4, so the model's default driver is unchanged.
spt-nkew:modbus-decod-708:1addedAdd the SPOT driver for NKE Watteco 50-70-080 (profile 708), linked to watteco:modbus:4 — Imported from device-catalog-spot (nke-watteco/modbus-decodage-generique-u16-class-a-copy) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 708 (7 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to watteco:modbus:4, so the model's default driver is unchanged.
spt-nkew:modbus-gener-618:1addedAdd the SPOT driver for Nke Watteco 50-70-080 (profile 618), linked to watteco:modbus:4 — Imported from device-catalog-spot (nke-watteco/modbus-generique-flottant-class-a) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 618 (24 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to watteco:modbus:4, so the model's default driver is unchanged.
spt-nkew:modbus-gener-619:1addedAdd the SPOT driver for Nke Watteco 50-70-080 (profile 619), linked to watteco:modbus:4 — Imported from device-catalog-spot (nke-watteco/modbus-generique-flottant-class-a-copy) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 619 (7 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to watteco:modbus:4, so the model's default driver is unchanged.
spt-nkew:modbus-itron-658:1addedAdd the SPOT driver for NKE Watteco 50-70-182 (profile 658), linked to watteco:modbus:4 — Imported from device-catalog-spot (nke-watteco/modbus-itron-cf-echo-ii-cf800) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 658 (12 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to watteco:modbus:4, so the model's default driver is unchanged.
spt-nkew:modbus-kamst-616:1addedAdd the SPOT driver for Nke Watteco 50-70-176 (profile 616), linked to watteco:modbus:4 — Imported from device-catalog-spot (nke-watteco/modbus-kamstrup) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 616 (10 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to watteco:modbus:4, so the model's default driver is unchanged.
spt-nkew:modbus-rs485-350:1addedAdd the SPOT driver for NKE Watteco 50-70-080 (profile 350), linked to watteco:modbus:4 — Imported from device-catalog-spot (nke-watteco/modbus-rs485-bridge-copy) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 350 (7452 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to watteco:modbus:4, so the model's default driver is unchanged.
spt-nkew:modbus-rs485-563:1addedimport the SPOT 50-70-165 driver (SPOT profile 563) — Imported from device-catalog-spot with the SPOT computed attributes already applied, keyed on SPOT profile 563. Extends the deviceEUI to modelId/protocolId resolution chain beyond the first pilot batch. Not yet referenced by any public model.yaml.
spt-nkew:presso-batch:1addedAdd the SPOT driver for NKE Watteco Press'O+ (profile 792), linked to watteco:presso:4 — Imported from device-catalog-spot (nke-watteco/nke-presso-copy-nkebatch) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 792 (28 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to watteco:presso:4, so the model's default driver is unchanged.
spt-nkew:pulse-pres-bat:1addedAdd the SPOT driver for NKE Watteco Press'O (profile 142), linked to watteco:presso:4 — Imported from device-catalog-spot (nke-watteco/nke-pulse-pres-o-nkebatch) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 142 (40 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to watteco:presso:4, so the model's default driver is unchanged.
spt-nkew:pulse-sens-o-409:1addedAdd the SPOT driver for NKE Watteco 50-70-072 (profile 409), linked to watteco:pulse-senso-atex:4 — Imported from device-catalog-spot (nke-watteco/pulse-sens-o-copy-nkebatch) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 409 (46 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to watteco:pulse-senso-atex:4, so the model's default driver is unchanged.
spt-nkew:pulse-sens-o-441:1addedAdd the SPOT driver for NKE Watteco 50-70-079 (profile 441), linked to watteco:pulse-senso:4 — Imported from device-catalog-spot (nke-watteco/nke-pulse-sens-o-batch-copy-nkebatch) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 441 (20 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to watteco:pulse-senso:4, so the model's default driver is unchanged.
spt-nkew:pulse-sens-o-681:1addedAdd the SPOT driver for NKE Watteco 50-70-160 (profile 681), linked to watteco:pulse-senso:4 — Imported from device-catalog-spot (nke-watteco/pulse-sens-o-batch-copy-nkebatch) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 681 (96 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to watteco:pulse-senso:4, so the model's default driver is unchanged.
spt-nkew:pulse-sens-o-682:1addedAdd the SPOT driver for NKE Watteco 50-70-123 (profile 682), linked to watteco:pulse-senso-atex:4 — Imported from device-catalog-spot (nke-watteco/pulse-sens-o-atex-copy-1-nkebatch) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 682 (117 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to watteco:pulse-senso-atex:4, so the model's default driver is unchanged.
spt-nkew:pulse-sens-o-75:1addedimport the SPOT 50-70-079 driver (SPOT profile 75) — Imported from device-catalog-spot with the SPOT computed attributes already applied, keyed on SPOT profile 75. Extends the deviceEUI to modelId/protocolId resolution chain beyond the first pilot batch. Not yet referenced by any public model.yaml.
spt-nkew:pulse-sens-o-76:1addedAdd the SPOT driver for NKE Watteco Flash'O (profile 76), linked to watteco:flasho:4 — Imported from device-catalog-spot (nke-watteco/nke-pulse-sens-o-copy-1-nkebatch) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 76 (2 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to watteco:flasho:4, so the model's default driver is unchanged.
spt-nkew:s0-348:1addeduplink decoder of the Watteco Pulse S0 — Decoder of the Watteco Pulse S0 (watteco:pulse-s0:4).
spt-nkew:sens-o-b-81:1addeduplink decoder of the Watteco Water Sens'O — Decoder of the Watteco Water Sens'O (watteco:water-senso:4).
spt-nkew:smartplug-a:1addedimport the SPOT Smartplug driver (SPOT profile 61) — Imported from device-catalog-spot with the SPOT computed attributes already applied, keyed on SPOT profile 61. Extends the deviceEUI to modelId/protocolId resolution chain beyond the first pilot batch. Not yet referenced by any public model.yaml.
spt-nkew:smartplug-c:1addedSPOT computed attributes of profile 62 applied to the imported driver — Re-imported from device-catalog-spot after the SPOT team ported the rows of template_device_profile_computes_attributes.csv for profile 62 into the decoder. The driver now emits the same computed fields the SPOT platform produced for these devices, so a migrated device keeps the attribute names its integration already consumes. Decoding of the raw payload is unchanged.
spt-nkew:temp-ind-batch:1updatedRe-imported from device-catalog-spot: SPOT output envelope reworked upstream, decoded output unchanged — device-catalog-spot generalised a [{ timestamp, data, errors, warnings }] batch envelope and hex-string input (device-catalog-spot up to de8443e, 2026-09-28). The import adapter unwraps it to the { data, errors, warnings } envelope this catalog ships; the decoded output of every example is byte-identical to the deployed 1.0.0, and a decoding error is still reported as an error.
spt-nkew:temp-remote-bat:1addedAdd the SPOT driver for NKE Watteco NKE - Sonde Temperature deportée (profile 22), linked to watteco:remote-temp:4 — Imported from device-catalog-spot (nke-watteco/nke-50-70-043-000-nkebatch) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 22 (163 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to watteco:remote-temp:4, so the model's default driver is unchanged.
spt-nkew:th-indoor-b-732:1addedAdd the SPOT driver for NKE Watteco 50-70-200 (profile 732), linked to watteco:hygrotemp-remote:4 — Imported from device-catalog-spot (nke-watteco/th-indoor-copy-1-nkebatch) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 732 (2 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to watteco:hygrotemp-remote:4, so the model's default driver is unchanged.
spt-nkew:th-indoor-bat2:1updatedRe-imported from device-catalog-spot: SPOT output envelope reworked upstream, decoded output unchanged — device-catalog-spot generalised a [{ timestamp, data, errors, warnings }] batch envelope and hex-string input (device-catalog-spot up to de8443e, 2026-09-28). The import adapter unwraps it to the { data, errors, warnings } envelope this catalog ships; the decoded output of every example is byte-identical to the deployed 1.0.0, and a decoding error is still reported as an error.
spt-nkew:th-indoor-batch:1addedAdd the SPOT driver for NKE Watteco 50-70-053 (profile 343), linked to watteco:th:4 — Imported from device-catalog-spot (nke-watteco/th-indoor-copy-nkebatch) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 343 (269 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to watteco:th:4, so the model's default driver is unchanged.
spt-nkew:tic-cpt-bleu-77:1addedimport the SPOT TIC PME-PMI driver (SPOT profile 77) — Imported from device-catalog-spot with the SPOT computed attributes already applied, keyed on SPOT profile 77. Extends the deviceEUI to modelId/protocolId resolution chain beyond the first pilot batch. Not yet referenced by any public model.yaml. No payload sample exists in the SPOT source, so the driver ships without an example and is not covered by the driver tests.
spt-nkew:tic-pme-pmi-397:1addedAdd the SPOT driver for NKE Watteco 50-70-045 (profile 397), linked to watteco:ticso:4 — Imported from device-catalog-spot (nke-watteco/nke-tic-pme-pmi-cbe-cje-ice-pme-pmi-linky-std-copy) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 397 (171 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to watteco:ticso:4, so the model's default driver is unchanged.
spt-nkew:tic-pmepmi-s-318:1addedAdd the SPOT driver for NKE Watteco 50-70-045 (profile 318), linked to watteco:ticso:4 — Imported from device-catalog-spot (nke-watteco/tic-pmepmi-specific-batch-p10m-nkebatch) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 318 (17 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to watteco:ticso:4, so the model's default driver is unchanged.
spt-nkew:triphaso-542:1addedimport the SPOT 50-70-105/146 driver (SPOT profile 542) — Imported from device-catalog-spot with the SPOT computed attributes already applied, keyed on SPOT profile 542. Held back from the first pass: the driver had no top-level decodeUplink declaration, so the TPX engine ran the raw decoder of its webpack bundle instead of the SPOT mapping wrapper. Fixed upstream in device-catalog-spot commit 653aa35 (2026-09-25). Not yet referenced by any public model.yaml.
spt-nkew:vaqao-batch:1addedAdd the SPOT driver for Nke Watteco 50-70-168-xxx (profile 594, 595), linked to watteco:vaqao:4 — Imported from device-catalog-spot (nke-watteco/vaqa-o-o-t-h-p-voc-co2-nkebatch) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 594, 595 (148 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to watteco:vaqao:4, so the model's default driver is unchanged.
spt-nkew:ventil-o-batch:1addedimport the SPOT 50-70-101 driver — Imported from device-catalog-spot with the SPOT computed attributes already applied. Extends the deviceEUI to modelId/protocolId resolution chain beyond the first pilot batch. Not yet referenced by any public model.yaml.

onesitu​

DriverChangeWhat changed
spt-ones:os110:1updatedRe-imported from device-catalog-spot: SPOT output envelope reworked upstream, decoded output unchanged — device-catalog-spot generalised a [{ timestamp, data, errors, warnings }] batch envelope and hex-string input (device-catalog-spot up to de8443e, 2026-09-28). The import adapter unwraps it to the { data, errors, warnings } envelope this catalog ships; the decoded output of every example is byte-identical to the deployed 1.0.0, and a decoding error is still reported as an error.

pyrescom​

DriverChangeWhat changed
pyrescom:city-light:1addedAdd Pyrescom EPnrj City Light private driver (GNSS, DALI, calendars, energy/power/temperature)

rftrack​

DriverChangeWhat changed
spt-rftr:loramote7-26:1addeduplink decoder of the RF-TRACK LoRaMote 7 — Decoder of the RF-TRACK LoRaMote 7 (rftrack:loramote-7:1).
spt-rftr:loramote7-73:1addeduplink decoder of the RF-TRACK LoRaMote 7 — Decoder of the RF-TRACK LoRaMote 7 (rftrack:loramote-7:1).

sagemcom​

DriverChangeWhat changed
spt-sage:ubifeel-16:1addeduplink decoder of the Sagemcom Ubifeel — Decoder of the Sagemcom Ubifeel (sagemcom:ubifeel:1).
spt-sage:ubifeel-70:1addeduplink decoder of the Sagemcom Ubifeel — Decoder of the Sagemcom Ubifeel (sagemcom:ubifeel:1).

sensing-labs​

DriverChangeWhat changed
spt-sens:4ma-lab-33ns:1addedimport the SPOT Senlab A : 4-20mA Outdoor driver (SPOT profile 4) — Imported from device-catalog-spot with the SPOT computed attributes already applied, keyed on SPOT profile 4. Extends the deviceEUI to modelId/protocolId resolution chain beyond the first pilot batch. Not yet referenced by any public model.yaml.
spt-sens:pul-lab-21ns:1addedimport the SPOT Senlab M driver (SPOT profile 5) — Imported from device-catalog-spot with the SPOT computed attributes already applied, keyed on SPOT profile 5. Extends the deviceEUI to modelId/protocolId resolution chain beyond the first pilot batch. Not yet referenced by any public model.yaml.
spt-sens:senlab-a-308:1addedAdd the SPOT driver for Sensing Labs Senlab A (profile 308), linked to senlab:4ma-41ns:1 — Imported from device-catalog-spot (sensing-labs/senlab-4-20ma-outdoor-avec-cable-copy-1) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 308 (7 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to senlab:4ma-41ns:1, so the model's default driver is unchanged.
spt-sens:senlab-a-362:1addedAdd the SPOT driver for Sensing Labs Senlab A (profile 362), linked to senlab:4ma-41ns:1 — Imported from device-catalog-spot (sensing-labs/senlab-4-20ma-outdoor-avec-cable-copy-7) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 362 (3 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to senlab:4ma-41ns:1, so the model's default driver is unchanged.
spt-sens:senlab-a-633:1addedAdd the SPOT driver for Sensing Labs Senlab A (profile 633), linked to senlab:4ma-41ns:1 — Imported from device-catalog-spot (sensing-labs/senlab-4-20ma-indoor-copy-1) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 633 (6 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to senlab:4ma-41ns:1, so the model's default driver is unchanged.
spt-sens:senlab-h-236:1addedAdd the SPOT driver for Sensing Labs Senlab H (profile 236), linked to senlab:thy-41ns:1 — Imported from device-catalog-spot (sensing-labs/senlab-temperature-hygrometrie-indoor-complexe-copy) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 236 (73 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to senlab:thy-41ns:1, so the model's default driver is unchanged.
spt-sens:senlab-h-238:1addedAdd the SPOT driver for Sensing Labs Senlab H (profile 238, 190), linked to senlab:thy-41ns:1 — Imported from device-catalog-spot (sensing-labs/senlab-temperature-hygrometrie-indoor-complexe-copy-copy-copy) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 238, 190 (158 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Also serves profile 190, which shares its codec and computed attributes (2026-09-28). Linked last to senlab:thy-41ns:1, so the model's default driver is unchanged.
spt-sens:senlab-h-264:1addedAdd the SPOT driver for Sensing Labs Senlab H (profile 264), linked to senlab:thy-41ns:1 — Imported from device-catalog-spot (sensing-labs/senlab-temperature-hygrometrie-outdoor-avec-sonde-deportee-copy) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 264 (2 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to senlab:thy-41ns:1, so the model's default driver is unchanged.
spt-sens:senlab-h-271:1addedAdd the SPOT driver for Sensing Labs Senlab H (profile 271), linked to senlab:thy-41ns:1 — Imported from device-catalog-spot (sensing-labs/senlab-temperature-hygrometrie-indoor-copy-4) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 271 (46 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to senlab:thy-41ns:1, so the model's default driver is unchanged.
spt-sens:senlab-h-424:1addedAdd the SPOT driver for Sensing Labs Senlab H (profile 424), linked to senlab:thy-41ns:1 — Imported from device-catalog-spot (sensing-labs/senlab-temperature-hygrometrie-outdoor-avec-sonde-deportee-copy-3) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 424 (41 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to senlab:thy-41ns:1, so the model's default driver is unchanged.
spt-sens:senlab-h-637:1addedAdd the SPOT driver for Sensing Labs Senlab H (profile 637), linked to senlab:thy-41ns:1 — Imported from device-catalog-spot (sensing-labs/senlab-temperature-hygrometrie-indoor-copy) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 637 (45 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to senlab:thy-41ns:1, so the model's default driver is unchanged.
spt-sens:senlab-m-246:1addedAdd the SPOT driver for Sensing Labs Senlab M (profile 246, 94), linked to senlab:pul-41ns:1 — Imported from device-catalog-spot (sensing-labs/senlab-m-outdoor-simple-fw-010218-copy-copy) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 246, 94 (298 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Also serves profile 94, which shares its codec and computed attributes (2026-09-28). Linked last to senlab:pul-41ns:1, so the model's default driver is unchanged.
spt-sens:senlab-m-251:1addedAdd the SPOT driver for Sensing Labs Senlab M (profile 251), linked to senlab:pul-41ns:1 — Imported from device-catalog-spot (sensing-labs/senlab-metering-outdoor-ip68-copy-copy-copy-copy-copy) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 251 (160 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to senlab:pul-41ns:1, so the model's default driver is unchanged.
spt-sens:senlab-m-254:1addedAdd the SPOT driver for Sensing Labs Senlab M (profile 254), linked to senlab:pul-13xs:1 — Imported from device-catalog-spot (sensing-labs/senlab-metering-outdoor-atex-ip68-copy) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 254 (7 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to senlab:pul-13xs:1, so the model's default driver is unchanged.
spt-sens:senlab-m-256:1addedAdd the SPOT driver for Sensing Labs Senlab M (profile 256), linked to senlab:pul-41ns:1 — Imported from device-catalog-spot (sensing-labs/senlab-metering-indoor-copy) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 256 (37 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to senlab:pul-41ns:1, so the model's default driver is unchanged.
spt-sens:senlab-m-261:1addedAdd the SPOT driver for Sensing Labs Senlab M (profile 261), linked to senlab:pul-41ns:1 — Imported from device-catalog-spot (sensing-labs/senlab-metering-indoor-copy-4) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 261 (142 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to senlab:pul-41ns:1, so the model's default driver is unchanged.
spt-sens:senlab-m-326:1addedAdd the SPOT driver for Sensing Labs Senlab M (profile 326), linked to senlab:led-41ns:1 — Imported from device-catalog-spot (sensing-labs/senlab-led-pour-compteur-elec-indoor-copy) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 326 (2 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to senlab:led-41ns:1, so the model's default driver is unchanged.
spt-sens:senlab-m-365:1addedAdd the SPOT driver for Sensing Labs Senlab M (profile 365), linked to senlab:pul-13xs:1 — Imported from device-catalog-spot (sensing-labs/senlab-metering-outdoor-atex-ip68-copy-2) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 365 (2 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to senlab:pul-13xs:1, so the model's default driver is unchanged.
spt-sens:senlab-m-370:1addedAdd the SPOT driver for Sensing Labs Senlab M (profile 370), linked to senlab:led-41ns:1 — Imported from device-catalog-spot (sensing-labs/senlab-led-pour-compteur-elec-indoor-copy-3) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 370 (20 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to senlab:led-41ns:1, so the model's default driver is unchanged.
spt-sens:senlab-m-623:1addedAdd the SPOT driver for Sensing Labs Senlab M (profile 623), linked to senlab:pul-41ns:1 — Imported from device-catalog-spot (sensing-labs/senlab-metering-outdoor-ip68-copy-1) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 623 (41 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to senlab:pul-41ns:1, so the model's default driver is unchanged.
spt-sens:senlab-m-634:1addedAdd the SPOT driver for Sensing Labs Senlab M (profile 634), linked to senlab:pul-41ns:1 — Imported from device-catalog-spot (sensing-labs/senlab-metering-outdoor-ip68-copy-2) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 634 (37 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to senlab:pul-41ns:1, so the model's default driver is unchanged.
spt-sens:senlab-m-635:1addedAdd the SPOT driver for Sensing Labs Senlab M (profile 635), linked to senlab:pul-41ns:1 — Imported from device-catalog-spot (sensing-labs/senlab-metering-indoor-copy-2) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 635 (15 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to senlab:pul-41ns:1, so the model's default driver is unchanged.
spt-sens:senlab-m-639:1addedAdd the SPOT driver for Sensing Labs Senlab M (profile 639), linked to senlab:pul-13xs:1 — Imported from device-catalog-spot (sensing-labs/senlab-metering-outdoor-atex-ip68-copy-3) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 639 (170 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to senlab:pul-13xs:1, so the model's default driver is unchanged.
spt-sens:senlab-m-643:1addedAdd the SPOT driver for Sensing Labs Senlab M (profile 643), linked to senlab:led-41ns:1 — Imported from device-catalog-spot (sensing-labs/senlab-led-pour-compteur-elec-indoor-copy-1) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 643 (1 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to senlab:led-41ns:1, so the model's default driver is unchanged.
spt-sens:senlab-t-278:1addedAdd the SPOT driver for Sensing Labs Senlab T (profile 278), linked to senlab:tem-41ns:1 — Imported from device-catalog-spot (sensing-labs/senlab-temperature-outdoor-ip68-copy-3) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 278 (33 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to senlab:tem-41ns:1, so the model's default driver is unchanged.
spt-sens:senlab-t-279:1addedAdd the SPOT driver for Sensing Labs Senlab T (profile 279), linked to senlab:tem-41ns:1 — Imported from device-catalog-spot (sensing-labs/senlab-temperature-outdoor-ip68-copy-4) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 279 (67 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to senlab:tem-41ns:1, so the model's default driver is unchanged.
spt-sens:senlab-t-289:1addedAdd the SPOT driver for Sensing Labs Senlab Température Indoor (profile 289), linked to senlab:tem-41ns:1 — Imported from device-catalog-spot (sensing-labs/senlab-temperature-indoor-copy-4) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 289 (23 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to senlab:tem-41ns:1, so the model's default driver is unchanged.
spt-sens:senlab-t-628:1addedAdd the SPOT driver for Sensing Labs Senlab T (profile 628), linked to senlab:tem-41ns:1 — Imported from device-catalog-spot (sensing-labs/senlab-temperature-indoor-copy-1) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 628 (23 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to senlab:tem-41ns:1, so the model's default driver is unchanged.
spt-sens:senlab-t-629:1addedAdd the SPOT driver for Sensing Labs Senlab T (profile 629), linked to senlab:tem-41ns:1 — Imported from device-catalog-spot (sensing-labs/senlab-temperature-outdoor-ip68-copy) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 629 (1 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to senlab:tem-41ns:1, so the model's default driver is unchanged.
spt-sens:senlab-t-630:1addedAdd the SPOT driver for Sensing Labs Senlab T (profile 630), linked to senlab:tem-41ns:1 — Imported from device-catalog-spot (sensing-labs/senlab-temperature-outdoor-ip68-avec-sonde-deportee-copy-1) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 630 (52 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to senlab:tem-41ns:1, so the model's default driver is unchanged.
spt-sens:senlab-t-636:1addedAdd the SPOT driver for Sensing Labs Senlab T (profile 636, 157, 103, 173), linked to senlab:tem-41ns:1 — Imported from device-catalog-spot (sensing-labs/senlab-temperature-indoor-copy-2) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 636, 157, 103, 173 (2600 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Also serves profile 157, 103, 173, which shares its codec and computed attributes (2026-09-28). Linked last to senlab:tem-41ns:1, so the model's default driver is unchanged.
spt-sens:senlab-t:1addedAdd the SPOT driver for Sensing Labs Senlab T (profile 368), linked to senlab:tem-41ns:1 — Imported from device-catalog-spot (sensing-labs/senlab-temperature-outdoor-ip68-avec-sonde-deportee-copy-5) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 368 (312 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to senlab:tem-41ns:1, so the model's default driver is unchanged.
spt-sens:tem-lab-13ns:1addedimport the SPOT Senlab T driver (SPOT profile 9) — Imported from device-catalog-spot with the SPOT computed attributes already applied, keyed on SPOT profile 9. Extends the deviceEUI to modelId/protocolId resolution chain beyond the first pilot batch. Not yet referenced by any public model.yaml.
spt-sens:tem-lab-21ns:1addedimport the SPOT Senlab Temperature Indoor driver (SPOT profile 8) — Imported from device-catalog-spot with the SPOT computed attributes already applied, keyed on SPOT profile 8. Extends the deviceEUI to modelId/protocolId resolution chain beyond the first pilot batch. Not yet referenced by any public model.yaml.
spt-sens:thy-lab-61ns:1addedimport the SPOT Senlab H driver (SPOT profile 7) — Imported from device-catalog-spot with the SPOT computed attributes already applied, keyed on SPOT profile 7. Extends the deviceEUI to modelId/protocolId resolution chain beyond the first pilot batch. Not yet referenced by any public model.yaml.

sewerin​

DriverChangeWhat changed
spt-sewe:sepem-712:1addeduplink decoder of the Sewerin SePem 351 — Decoder of the Sewerin SePem 351 (sewerin:sepem-351:1). No payload example is available yet, so the driver ships without an example and is not covered by the driver tests.

tekelek​

DriverChangeWhat changed
spt-teke:tek-766-67:1addedAdd the SPOT driver for TEKELEK Cuve parallélépipédique (profile 67, 209, 120), linked to tekelek:tek-766:1 — Imported from device-catalog-spot (tekelek/tek-766) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 67, 209, 120 (34 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Also serves profile 209, 120, which shares its codec and computed attributes (2026-09-28). Linked last to tekelek:tek-766:1, so the model's default driver is unchanged.
spt-teke:tek-766-cch-207:1addedAdd the SPOT driver for TEKELEK Cuve Cylindrique Horizontale (profile 207), linked to tekelek:tek-766:1 — Imported from device-catalog-spot (tekelek/tek-766-cch-copy) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 207 (1 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to tekelek:tek-766:1, so the model's default driver is unchanged.
spt-teke:tek-766-cch-68:1addedAdd the SPOT driver for TEKELEK Cuve Cylindrique Horizontale (profile 68), linked to tekelek:tek-766:1 — Imported from device-catalog-spot (tekelek/tek-766-cch) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 68 (3 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to tekelek:tek-766:1, so the model's default driver is unchanged.
spt-teke:tek-766-cpp-205:1addedAdd the SPOT driver for TEKELEK Cuve Parallélépipédique (profile 205), linked to tekelek:tek-766:1 — Imported from device-catalog-spot (tekelek/tek-766-cpp) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 205 (2 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to tekelek:tek-766:1, so the model's default driver is unchanged.
spt-teke:tek-766-inc:1updatedRe-imported from device-catalog-spot: SPOT output envelope reworked upstream, decoded output unchanged — device-catalog-spot generalised a [{ timestamp, data, errors, warnings }] batch envelope and hex-string input (device-catalog-spot up to de8443e, 2026-09-28). The import adapter unwraps it to the { data, errors, warnings } envelope this catalog ships; the decoded output of every example is byte-identical to the deployed 1.0.0, and a decoding error is still reported as an error.

vega​

DriverChangeWhat changed
spt-vega:puls-41:1addedAdd the SPOT driver for VEGA VEGAPULS 41 DECODED (profile 790), linked to vega:vegapuls-air-41:1 — Imported from device-catalog-spot (vega/vegapuls-41) with its SPOT computed attributes, so the Objenious/SPOT devices of profile 790 (1 devices in the SPOT inventory of 2026-09-25) keep the decoded fields their integrations consume once reprovisioned on ThingPark with this protocolId. Linked last to vega:vegapuls-air-41:1, so the model's default driver is unchanged.

watteco​

DriverChangeWhat changed
watteco:alto:5addedAdd Watteco Alt'O driver: radar water level (distance), tilt, accelerometer temperature, battery — Contributed by Watteco (PR #288), codec 1.1.2. Points: distance (m), angle (deg), temperature (Cel), acceleration (mgravity), batteryVoltage (V); the radar echo magnitude has no ontology field. Downlink: custom hex frame, confirmed mode, reboot, factory reset, LoRa retries, rejoin. No BACnet/Modbus mapping.
watteco:atmo:5updatedWatteco codec 1.1.8: points carry the sample time — Watteco codec 1.1.8 (PR #288). Decoded output unchanged on every known payload (examples, production samples, v1.0 examples; downlink commands identical). The samples now reach extractPoints with string dates, so the points carry the sample time as eventTime inside the driver engine (the deployed codec handed a Date object, which the engine dropped); batch reports now date each point with its own sample time.
watteco:climo:5updatedWatteco codec 1.1.8: points carry the sample time — Watteco codec 1.1.8 (PR #288). Decoded output unchanged on every known payload (examples, production samples, v1.0 examples; downlink commands identical). The samples now reach extractPoints with string dates, so the points carry the sample time as eventTime inside the driver engine (the deployed codec handed a Date object, which the engine dropped); batch reports now date each point with its own sample time.
watteco:closo:5updatedWatteco codec 1.1.8: points carry the sample time — Watteco codec 1.1.8 (PR #288). Decoded output unchanged on every known payload (examples, production samples, v1.0 examples; downlink commands identical). The samples now reach extractPoints with string dates, so the points carry the sample time as eventTime inside the driver engine (the deployed codec handed a Date object, which the engine dropped); batch reports now date each point with its own sample time.
watteco:flasho:5updatedWatteco codec 1.1.8: points carry the sample time — Watteco codec 1.1.8 (PR #288). Decoded output unchanged on every known payload (examples, production samples, v1.0 examples; downlink commands identical). The samples now reach extractPoints with string dates, so the points carry the sample time as eventTime inside the driver engine (the deployed codec handed a Date object, which the engine dropped); batch reports now date each point with its own sample time.
watteco:hygrotemp-remote:5updatedWatteco codec 1.1.8: points carry the sample time — Watteco codec 1.1.8 (PR #288). Decoded output unchanged on every known payload (examples, production samples, v1.0 examples; downlink commands identical). The samples now reach extractPoints with string dates, so the points carry the sample time as eventTime inside the driver engine (the deployed codec handed a Date object, which the engine dropped); batch reports now date each point with its own sample time.
watteco:hygrotempo:5updatedWatteco codec 1.1.8: points carry the sample time — Watteco codec 1.1.8 (PR #288). Decoded output unchanged on every known payload (examples, production samples, v1.0 examples; downlink commands identical). The samples now reach extractPoints with string dates, so the points carry the sample time as eventTime inside the driver engine (the deployed codec handed a Date object, which the engine dropped); batch reports now date each point with its own sample time.
watteco:inclino:5updatedBACnet/Modbus mapping moved to watteco:inclino:6, the model's first protocolId; decoder unchanged — Codec 1.1.9 changes this driver's output, so it ships as watteco:inclino:6 and this package keeps the deployed codec, examples and extractPoints. Only the mapping.json leaves it, for the v2 that the model now lists first.
watteco:inclino:6addedAdd Inclin'O driver v2 (codec 1.1.9): tilt decoded as Tilt, exposed over BACnet/Modbus — New protocolId because codec 1.1.9 renames the decoded field Deg to Tilt (data.Tilt, samples[].variable "Tilt"). The angle point is kept (angle, deg). BACnet/Modbus: the mapping moves here (first protocolId of the model) and its dead 'angle' object (a triphaso phase angle) becomes 'Tilt', FLOAT in degrees - the inclination was never exposed before. Devices already provisioned stay on watteco:inclino:5.
watteco:indoor-temp:5updatedWatteco codec 1.1.8: points carry the sample time — Watteco codec 1.1.8 (PR #288). Decoded output unchanged on every known payload (examples, production samples, v1.0 examples; downlink commands identical). The samples now reach extractPoints with string dates, so the points carry the sample time as eventTime inside the driver engine (the deployed codec handed a Date object, which the engine dropped); batch reports now date each point with its own sample time.
watteco:ino:5updatedWatteco codec 1.1.8: points carry the sample time — Watteco codec 1.1.8 (PR #288). Decoded output unchanged on every known payload (examples, production samples, v1.0 examples; downlink commands identical). The samples now reach extractPoints with string dates, so the points carry the sample time as eventTime inside the driver engine (the deployed codec handed a Date object, which the engine dropped); batch reports now date each point with its own sample time.
watteco:intenso:5updatedWatteco codec 1.1.8: points carry the sample time — Watteco codec 1.1.8 (PR #288). Decoded output unchanged on every known payload (examples, production samples, v1.0 examples; downlink commands identical). The samples now reach extractPoints with string dates, so the points carry the sample time as eventTime inside the driver engine (the deployed codec handed a Date object, which the engine dropped); batch reports now date each point with its own sample time.
watteco:levo:5updatedWatteco codec 1.1.8: points carry the sample time — Watteco codec 1.1.8 (PR #288). Decoded output unchanged on every known payload (examples, production samples, v1.0 examples; downlink commands identical). The samples now reach extractPoints with string dates, so the points carry the sample time as eventTime inside the driver engine (the deployed codec handed a Date object, which the engine dropped); batch reports now date each point with its own sample time.
watteco:modbus:5updatedWatteco codec 1.1.8: points carry the sample time — Watteco codec 1.1.8 (PR #288). Decoded output unchanged on every known payload (examples, production samples, v1.0 examples; downlink commands identical). The samples now reach extractPoints with string dates, so the points carry the sample time as eventTime inside the driver engine (the deployed codec handed a Date object, which the engine dropped); batch reports now date each point with its own sample time. Examples: the master/slave payload's length byte corrected by Watteco (0x2B), a three-endpoint example added.
watteco:monito:5updatedBACnet/Modbus mapping moved to watteco:monito:6, the model's first protocolId; decoder unchanged — Codec 1.1.9 changes this driver's output, so it ships as watteco:monito:6 and this package keeps the deployed codec, examples and extractPoints. Only the mapping.json leaves it, for the v2 that the model now lists first.
watteco:monito:6addedAdd Monit'O driver v2 (codec 1.1.9): 0-70 V input labelled in mV, voltage point in V — New protocolId because codec 1.1.9 changes 0-70_V_unit from V to mV (value unchanged). The new label is right: production samples read 26936.88 for a 26.9 V input. The voltage point divides by 1000 and stays in V (the v1 point publishes the mV value as V). BACnet/Modbus: the mapping moves here; 0-70_V is declared in mV (0-70000). Devices already provisioned stay on watteco:monito:5.
watteco:moveo-lite:5updatedWatteco codec 1.1.8: points carry the sample time — Watteco codec 1.1.8 (PR #288). Decoded output unchanged on every known payload (examples, production samples, v1.0 examples; downlink commands identical). The samples now reach extractPoints with string dates, so the points carry the sample time as eventTime inside the driver engine (the deployed codec handed a Date object, which the engine dropped); batch reports now date each point with its own sample time.
watteco:presso:5updatedWatteco codec 1.1.8: points carry the sample time — Watteco codec 1.1.8 (PR #288). Decoded output unchanged on every known payload (examples, production samples, v1.0 examples; downlink commands identical). The samples now reach extractPoints with string dates, so the points carry the sample time as eventTime inside the driver engine (the deployed codec handed a Date object, which the engine dropped); batch reports now date each point with its own sample time.
watteco:pulse-senso-atex:5updatedWatteco codec 1.1.8: points carry the sample time — Watteco codec 1.1.8 (PR #288). Decoded output unchanged on every known payload (examples, production samples, v1.0 examples; downlink commands identical). The samples now reach extractPoints with string dates, so the points carry the sample time as eventTime inside the driver engine (the deployed codec handed a Date object, which the engine dropped); batch reports now date each point with its own sample time.
watteco:pulse-senso:5updatedWatteco codec 1.1.8: points carry the sample time — Watteco codec 1.1.8 (PR #288). Decoded output unchanged on every known payload (examples, production samples, v1.0 examples; downlink commands identical). The samples now reach extractPoints with string dates, so the points carry the sample time as eventTime inside the driver engine (the deployed codec handed a Date object, which the engine dropped); batch reports now date each point with its own sample time.
watteco:smart-plug:5updatedWatteco codec 1.1.8: points carry the sample time — Watteco codec 1.1.8 (PR #288). Decoded output unchanged on every known payload (examples, production samples, v1.0 examples; downlink commands identical). The samples now reach extractPoints with string dates, so the points carry the sample time as eventTime inside the driver engine (the deployed codec handed a Date object, which the engine dropped); batch reports now date each point with its own sample time. Examples: the state payload corrected by Watteco to the ZCL boolean type (0x10, ON); the OFF example is kept.
watteco:smartpilot-wire:5updatedWatteco codec 1.1.8: points carry the sample time — Watteco codec 1.1.8 (PR #288). Decoded output unchanged on every known payload (examples, production samples, v1.0 examples; downlink commands identical). The samples now reach extractPoints with string dates, so the points carry the sample time as eventTime inside the driver engine (the deployed codec handed a Date object, which the engine dropped); batch reports now date each point with its own sample time.
watteco:temp-remte-1-prb:5updatedWatteco codec 1.1.8: points carry the sample time — Watteco codec 1.1.8 (PR #288). Decoded output unchanged on every known payload (examples, production samples, v1.0 examples; downlink commands identical). The samples now reach extractPoints with string dates, so the points carry the sample time as eventTime inside the driver engine (the deployed codec handed a Date object, which the engine dropped); batch reports now date each point with its own sample time.
watteco:temp-remte-2-prb:5updatedWatteco codec 1.1.8: points carry the sample time — Watteco codec 1.1.8 (PR #288). Decoded output unchanged on every known payload (examples, production samples, v1.0 examples; downlink commands identical). The samples now reach extractPoints with string dates, so the points carry the sample time as eventTime inside the driver engine (the deployed codec handed a Date object, which the engine dropped); batch reports now date each point with its own sample time.
watteco:tempo-outdoor:5updatedWatteco codec 1.1.8: points carry the sample time — Watteco codec 1.1.8 (PR #288). Decoded output unchanged on every known payload (examples, production samples, v1.0 examples; downlink commands identical). The samples now reach extractPoints with string dates, so the points carry the sample time as eventTime inside the driver engine (the deployed codec handed a Date object, which the engine dropped); batch reports now date each point with its own sample time.
watteco:tempo:5updatedWatteco codec 1.1.8: points carry the sample time — Watteco codec 1.1.8 (PR #288). Decoded output unchanged on every known payload (examples, production samples, v1.0 examples; downlink commands identical). The samples now reach extractPoints with string dates, so the points carry the sample time as eventTime inside the driver engine (the deployed codec handed a Date object, which the engine dropped); batch reports now date each point with its own sample time.
watteco:th:5updatedWatteco codec 1.1.8: points carry the sample time — Watteco codec 1.1.8 (PR #288). Decoded output unchanged on every known payload (examples, production samples, v1.0 examples; downlink commands identical). The samples now reach extractPoints with string dates, so the points carry the sample time as eventTime inside the driver engine (the deployed codec handed a Date object, which the engine dropped); batch reports now date each point with its own sample time.
watteco:ticso:5updatedWatteco codec 1.1.8: points carry the sample time, General TIC frame (TGPHI) decoded — Watteco codec 1.1.8 (PR #288). Decoded output unchanged on every known payload (examples, production samples, v1.0 examples; downlink commands identical). The samples now reach extractPoints with string dates, so the points carry the sample time as eventTime inside the driver engine (the deployed codec handed a Date object, which the engine dropped); batch reports now date each point with its own sample time. Also decodes the General TIC frame carrying TGPHI only, which the deployed codec rejected (new example).
watteco:torano-atex:5updatedWatteco codec 1.1.8: points carry the sample time — Watteco codec 1.1.8 (PR #288). Decoded output unchanged on every known payload (examples, production samples, v1.0 examples; downlink commands identical). The samples now reach extractPoints with string dates, so the points carry the sample time as eventTime inside the driver engine (the deployed codec handed a Date object, which the engine dropped); batch reports now date each point with its own sample time.
watteco:triphaso:5updatedBACnet/Modbus mapping moved to watteco:triphaso:6, the model's first protocolId; decoder unchanged — Codec 1.1.9 changes this driver's output, so it ships as watteco:triphaso:6 and this package keeps the deployed codec, examples and extractPoints. Only the mapping.json leaves it, for the v2 that the model now lists first.
watteco:triphaso:6addedAdd Triphas'O driver v2 (codec 1.1.9): signed reactive power, points at the decoded scale — New protocolId because codec 1.1.9 decodes reactive_power_a/b/c/abc as signed int32 (-992 VAr where the deployed codec returned 4294966304). Points: Vrms, Irms and phase angles published as decoded (the v1 extractPoints divided Vrms, Irms C and angle C by 10: 23.8 V for 238 V); signed active/reactive power without the 'Positive' nature. BACnet/Modbus: the mapping moves here unchanged (reactive power was already INT32). Devices already provisioned stay on watteco:triphaso:5.
watteco:vaqao-lite:5updatedWatteco codec 1.1.8: points carry the sample time — Watteco codec 1.1.8 (PR #288). Decoded output unchanged on every known payload (examples, production samples, v1.0 examples; downlink commands identical). The samples now reach extractPoints with string dates, so the points carry the sample time as eventTime inside the driver engine (the deployed codec handed a Date object, which the engine dropped); batch reports now date each point with its own sample time.
watteco:ventilo:5updatedWatteco codec 1.1.8: points carry the sample time — Watteco codec 1.1.8 (PR #288). Decoded output unchanged on every known payload (examples, production samples, v1.0 examples; downlink commands identical). The samples now reach extractPoints with string dates, so the points carry the sample time as eventTime inside the driver engine (the deployed codec handed a Date object, which the engine dropped); batch reports now date each point with its own sample time.

Device profiles​

abeeway​

ModelChangeWhat changed
abeeway:compact-tracker:1updatedlink 1 imported SPOT driver protocolId (SPOT profile 793) — Adds spt-abee:compact-tracker:1 to the protocolId list so the Objenious/SPOT devices of SPOT profile 793 (10 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.

adeunis​

ModelChangeWhat changed
adeunis:analog-pwr:1addednew model: Adeunis Analog PWR — Externally powered version of the Adeunis ANALOG transmitter (ARF8200AA). It gives LoRaWAN connectivity to wired analog sensors through two independently configurable 0-10 V or 4-20 mA inputs, with periodic and high/low threshold alarm transmissions and two digital inputs that trigger measurements. LoRaWAN 1.0.2 class A, EU868 (adeunis_RFGroup1_1.0.2revB_classA); decoded by spt-adeu:analog-pwr-195:1 or spt-adeu:analog-pwr:1 depending on the firmware.
adeunis:analog:2updatedlink 2 imported SPOT driver protocolIds (SPOT profiles 194, 589) — Adds spt-adeu:analog:1, spt-adeu:analog-589:1 to the protocolId list so the Objenious/SPOT devices of SPOT profiles 194, 589 (504 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.
adeunis:comfort-co2:1updatedlink 2 imported SPOT driver protocolIds (SPOT profiles 730, 725) — Adds spt-adeu:comfort-co2-730:1, spt-adeu:comfort-v2-725:1 to the protocolId list so the Objenious/SPOT devices of SPOT profiles 730, 725 (523 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.
adeunis:comfort:1updatedlink 3 imported SPOT driver protocolIds (SPOT profiles 411, 620, 554) — Adds spt-adeu:comfort:1, spt-adeu:comfort-time-620:1, spt-adeu:comfort-554:1 to the protocolId list so the Objenious/SPOT devices of SPOT profiles 411, 620, 554 (2441 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.
adeunis:comfort:2updatedlink 2 imported SPOT driver protocolIds (SPOT profiles 688, 700) — Adds spt-adeu:comfort-v2-h-688:1, spt-adeu:comfort-v2-h-700:1 to the protocolId list so the Objenious/SPOT devices of SPOT profiles 688, 700 (430 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.
adeunis:dry-contacts:2updatedlink 3 imported SPOT driver protocolIds (SPOT profiles 197, 591, 724) — Adds spt-adeu:dry-contacts:1, spt-adeu:dry-contacts-591:1, spt-adeu:dry-contacts-724:1 to the protocolId list so the Objenious/SPOT devices of SPOT profiles 197, 591, 724 (808 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.
adeunis:field-test:1updatedlink 3 imported SPOT driver protocolIds (SPOT profiles 1, 574, 570, 575, 569) — Adds spt-adeu:field-test:1, spt-adeu:field-test-d-575:1, spt-adeu:field-test-d-569:1 to the protocolId list so the Objenious/SPOT devices of SPOT profiles 1, 574, 570, 575, 569 (261 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.
adeunis:modbus:1updatedlink 5 imported SPOT driver protocolIds (SPOT profiles 451, 530, 201, 596, 415) — Adds spt-adeu:modbus-451:1, spt-adeu:modbus-arf82-530:1, spt-adeu:modbus:1, spt-adeu:modbus-v2-596:1, spt-adeu:modbus-415:1 to the protocolId list so the Objenious/SPOT devices of SPOT profiles 451, 530, 201, 596, 415 (431 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.
adeunis:motion:1updatedlink 1 imported SPOT driver protocolId (SPOT profile 412) — Adds spt-adeu:motion:1 to the protocolId list so the Objenious/SPOT devices of SPOT profile 412 (2 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.
adeunis:pulse-v1:1addednew model: Adeunis Pulse Sensor V1 — First-generation Adeunis LoRaWAN PULSE (ARF8046PA): radio transmitter that turns water, gas, electricity or heat meters with a pulse output into wireless meters. It reads up to two meters of the same type, sends their pulse counts and alerts on fraud (tamper wire). Discontinued in 2018, replaced by the Pulse Sensor V2 (ARF8230AA). LoRaWAN 1.0.2 class A, EU868 (adeunis_RFGroup1_1.0.2revB_classA); decoded by spt-adeu:pulse-v1-2:1.
adeunis:pulse:2updatedlink 2 imported SPOT driver protocolIds (SPOT profiles 199, 408) — Adds spt-adeu:pulse-v2:1, spt-adeu:pulse-v2-408:1 to the protocolId list so the Objenious/SPOT devices of SPOT profiles 199, 408 (1519 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.
adeunis:pulse:4updatedlink 2 imported SPOT driver protocolIds (SPOT profiles 690, 691) — Adds spt-adeu:pulse-v4-his-690:1, spt-adeu:pulse-v4-his-691:1 to the protocolId list so the Objenious/SPOT devices of SPOT profiles 690, 691 (47 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.
adeunis:temp:2updatedlink 5 imported SPOT driver protocolIds (SPOT profiles 200, 509, 557, 439, 179) — Adds spt-adeu:temp-200:1, spt-adeu:temp-3-2s-509:1, spt-adeu:temp-3-2s-557:1, spt-adeu:temp-439:1, spt-adeu:temp:1 to the protocolId list so the Objenious/SPOT devices of SPOT profiles 200, 509, 557, 439, 179 (863 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.
adeunis:temp:4updatedlink 1 imported SPOT driver protocolId (SPOT profile 702) — Adds spt-adeu:temp-v4-2s-h-702:1 to the protocolId list so the Objenious/SPOT devices of SPOT profile 702 (76 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.
adeunis:tic:1updatedlink 1 imported SPOT driver protocolId (SPOT profiles 592, 455) — Adds spt-adeu:tic-v2-592:1 to the protocolId list so the Objenious/SPOT devices of SPOT profiles 592, 455 (380 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.

atim​

ModelChangeWhat changed
atim:acw-cts:1updatedATIM ACW-CTS: per-product driver first — The model lists atim:cts:1 first and atim:generic:1 second; its sensors follow the new driver. A protocolId binds new devices only: devices already provisioned keep atim:generic:1 and its points.
atim:acw-gaug:1addedATIM ACW-GAUG tank level gauge: new model — New model for the ACW-GAUG tank level gauge, on its per-product driver, with atim:generic:1 as second protocolId.
atim:acw-mr2:1updatedATIM ACW-MR2: per-product driver first — The model lists atim:mr2-ex:1 first and atim:generic:1 second; its sensors follow the new driver. A protocolId binds new devices only: devices already provisioned keep atim:generic:1 and its points.
atim:acw-mr4-opto:1addedATIM ACW-MR4-OPTO optical meter reading: new model — New model for the ACW-MR4-OPTO optical meter reading, on its per-product driver, with atim:generic:1 as second protocolId.
atim:acw-ptmxp:1addedATIM ACW-PTMxP differential pressure and PT1000 temperature: new model — New model for the ACW-PTMxP differential pressure and PT1000 temperature, on its per-product driver, with atim:generic:1 as second protocolId.
atim:acw-th:1updatedATIM ACW-TH: per-product driver first — The model lists atim:thx:1 first and atim:generic:1 second; its sensors follow the new driver. A protocolId binds new devices only: devices already provisioned keep atim:generic:1 and its points.
atim:air-quality:1updatedATIM ACW-THAQ: per-product driver first, SPOT protocolId linked — The model lists atim:thaq:1 first and atim:generic:1 second; its sensors follow the new driver (TXIF-4309). Also adds spt-atim:acw-lw8-thaq-765:1 to the protocolId list, appended last, so the Objenious/SPOT devices of SPOT profile 765 (409 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model (TXIF-4314). A protocolId binds new devices only: devices already provisioned keep atim:generic:1 and its points.
atim:atex-smart:1updatedATIM ACW-MR2-EX: per-product driver first — The model lists atim:mr2-ex:1 first and atim:generic:1 second; its sensors follow the new driver. A protocolId binds new devices only: devices already provisioned keep atim:generic:1 and its points.
atim:dry-contact-i:1updatedATIM ACW-DINDx0: per-product driver first, SPOT protocolId linked — The model lists atim:dind88:1 first and atim:generic:1 second; its sensors follow the new driver (TXIF-4309). Also adds spt-atim:acw-dindxxx-671:1 to the protocolId list, appended last, so the Objenious/SPOT devices of SPOT profile 671 (3 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model (TXIF-4314). A protocolId binds new devices only: devices already provisioned keep atim:generic:1 and its points.
atim:dry-contact-io:1updatedATIM ACW-DINDxx: per-product driver first — The model lists atim:dind21:1 first and atim:generic:1 second; its sensors follow the new driver. A protocolId binds new devices only: devices already provisioned keep atim:generic:1 and its points.
atim:indoor-temp-humi:1updatedATIM ACW-THX-I: per-product driver first — The model lists atim:thx:1 first and atim:generic:1 second; its sensors follow the new driver. A protocolId binds new devices only: devices already provisioned keep atim:generic:1 and its points.
atim:leak-detection:1updatedATIM ACW-WL: per-product driver first — The model lists atim:wlk:1 first and atim:generic:1 second; its sensors follow the new driver. A protocolId binds new devices only: devices already provisioned keep atim:generic:1 and its points.
atim:motion-detector:1updatedATIM ACW-PIRxx: per-product driver first — The model lists atim:pir:1 first and atim:generic:1 second; its sensors follow the new driver. A protocolId binds new devices only: devices already provisioned keep atim:generic:1 and its points.
atim:outdoor-temp-hum:1updatedATIM ACW-TH-O: per-product driver first — The model lists atim:thx:1 first and atim:generic:1 second; its sensors follow the new driver. A protocolId binds new devices only: devices already provisioned keep atim:generic:1 and its points.
atim:pt1000-temp:1updatedATIM ACW-TMxP: per-product driver first — The model lists atim:tmxp:1 first and atim:generic:1 second; its sensors follow the new driver. A protocolId binds new devices only: devices already provisioned keep atim:generic:1 and its points.
atim:smart-pulse:1updatedATIM ACW-MR4: per-product driver first — The model lists atim:mr4:1 first and atim:generic:1 second; its sensors follow the new driver. A protocolId binds new devices only: devices already provisioned keep atim:generic:1 and its points.
atim:temp-humi-probe:1updatedATIM ACW-TCR: per-product driver first — The model lists atim:tcr:1 first and atim:generic:1 second; its sensors follow the new driver. A protocolId binds new devices only: devices already provisioned keep atim:generic:1 and its points.
atim:th-i:2updatedATIM ACW-TH Indoor v2: per-product driver first — The model lists atim:thx:1 first and atim:generic:1 second; its sensors follow the new driver. A protocolId binds new devices only: devices already provisioned keep atim:generic:1 and its points.

diehl​

ModelChangeWhat changed
diehl:hrlc-g3:1updatedlink 1 imported SPOT driver protocolId (SPOT profile 428) — Adds spt-dieh:hrlc-g3-428:1 to the protocolId list so the Objenious/SPOT devices of SPOT profile 428 (360 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.

digital_matter​

ModelChangeWhat changed
digi-mat:oyster:60updatedlink the imported SPOT driver protocolId spt-digm:oyster:1 — Adds spt-digm:oyster:1 to the protocolId list so the Objenious/SPOT devices of SPOT profile 531 (2 devices in the import file) can be reprovisioned on this ThingPark model. Matched on decoded content rather than on the SPOT label: the driver is the Oyster tracker decoder. Appended last, so the model's default driver and its sensor validation are unchanged.

eco-adapt​

ModelChangeWhat changed
ecoadapt:power-elec-6:1updatedlink the imported SPOT driver protocolId spt-ecoa:power-elec-6:1 — Adds spt-ecoa:power-elec-6:1 to the protocolId list so the Objenious/SPOT devices of SPOT profile 465 (111 devices in the import file) can be reprovisioned on this ThingPark model. Matched on decoded content rather than on the SPOT label: the driver reports per-channel active and reactive energy. Appended last, so the model's default driver and its sensor validation are unchanged.

efsys​

ModelChangeWhat changed
efsys:relais-lora:1addednew model: EFSYS Relais LoRa — LoRaWAN relay controller. Reports the relay and terminal states, the automatic, manual and stop modes, and the radio link quality (RSSI and SNR). LoRaWAN 1.0.2 class A, EU868 (efsys_RFGroup1_1.0.2a_classA); decoded by spt-efsy:relais-lora-495:1.

elsys​

ModelChangeWhat changed
elsys:elt-2:1updatedlink 1 imported SPOT driver protocolId (SPOT profile 593) — Adds spt-elsy:elt-2-593:1 to the protocolId list so the Objenious/SPOT devices of SPOT profile 593 (11 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.
elsys:ers-co2:1updatedlink 1 imported SPOT driver protocolId (SPOT profile 132) — Adds spt-elsy:elsys-ers-132:1 to the protocolId list so the Objenious/SPOT devices of SPOT profile 132 (2044 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.
elsys:ers:1updatedlink 1 imported SPOT driver protocolId (SPOT profile 656) — Adds spt-elsy:ers-co2:1 to the protocolId list so the Objenious/SPOT devices of SPOT profile 656 (720 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.

elvaco​

ModelChangeWhat changed
elvaco:cmi4130:1addednew model: Elvaco CMi4130 — LoRaWAN meter connectivity module mounted inside an Itron CF ECHO II heat meter or an Itron CF 51/55 calculator. It reads the meter (energy, volume, power, flow, forward and return temperatures, error flags) and delivers the data to a server over LoRaWAN. LoRaWAN 1.0.2 class A, EU868 (elvaco_RFGroup1_1.0.2b_classA); decoded by spt-elva:cmi4130-676:1.
elvaco:cmi4140:1addednew model: Elvaco CMi4140 — LoRaWAN meter connectivity module mounted inside a Kamstrup MULTICAL 403, 603 or 803 heating or cooling meter. It reads the meter (heat and cooling energy, volume, power, flow, forward and return temperatures, error flags) and delivers the data to a server over LoRaWAN. LoRaWAN 1.0.2 class A, EU868 (elvaco_RFGroup1_1.0.2b_classA); decoded by spt-elva:cmi4140-672:1.
elvaco:cmi4160:1updatedlink 1 imported SPOT driver protocolId (SPOT profile 677) — Adds spt-elva:cmi4160-677:1 to the protocolId list so the Objenious/SPOT devices of SPOT profile 677 (69 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.

enless-wireless​

ModelChangeWhat changed
enless-w:600-031:1updatedlink 1 imported SPOT driver protocolId (SPOT profile 600) — Adds spt-enle:tx-temp-ins-600:1 to the protocolId list so the Objenious/SPOT devices of SPOT profile 600 (12 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.
enless-w:tx-amb-600-021:1updatedlink 1 imported SPOT driver protocolId (SPOT profile 608) — Adds spt-enle:transmetteur-608:1 to the protocolId list so the Objenious/SPOT devices of SPOT profile 608 (56 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.

eolane​

ModelChangeWhat changed
eolane:bob:1updatedlink the imported SPOT driver protocolId spt-eola:bob-assistant:1 — Adds spt-eola:bob-assistant:1 to the protocolId list so the Objenious/SPOT devices of SPOT profile 384 (6 devices in the import file) can be reprovisioned on this ThingPark model. Matched on decoded content rather than on the SPOT label: the driver is the Bob Assistant decoder. Appended last, so the model's default driver and its sensor validation are unchanged.
eolane:movee:1updatedlink the imported SPOT driver protocolIds spt-eola:movee-488:1 and 1 more — Adds spt-eola:movee-488:1 to the protocolId list so the Objenious/SPOT devices of SPOT profile 488 (17 devices in the import file) can be reprovisioned on this ThingPark model. Matched on decoded content rather than on the SPOT label: the driver reports battery and temperature. Appended last, so the model's default driver and its sensor validation are unchanged. Third batch (2026-09-28): also adds spt-eola:movee-53:1 for SPOT profile 53 (46 devices in the SPOT inventory of 2026-09-25), matched on the device the SPOT profile describes and appended last as well.

ineo-sense​

ModelChangeWhat changed
ineosens:acs-padlock:1addednew model: Ineo-Sense ACS-Padlock — LoRaWAN connected padlock. Reports the lock state, the identifier of the user operating it, temperature and system status, and raises alarms on hatch opening, cut and cable events. LoRaWAN 1.0.2 class A, EU868 (ineosens_RFGroup1_1.0.2a_classA); decoded by spt-ineo:acs-padlock:1.
ineosens:acs-switch-jcd:1addednew model: Ineo-Sense ACS-Switch-JCD — Variant of the Ineo-Sense ACS-Switch LoRaWAN opening and position sensor for doors, hatches and equipment. Reports the switch state with active and inactive counters and activity rate, the event source and its configuration, the device position, temperature and humidity, each report timestamped. LoRaWAN 1.0.2 class A, EU868 (ineosens_RFGroup1_1.0.2a_classA); decoded by spt-ineo:acs-switch-534:1.
ineosens:acs-switch-range:1addednew model: Ineo-Sense ACS-Switch-Range — LoRaWAN switch and position sensor of the Ineo-Sense ACS-Switch family. Reports the switch state and position, per-state counters, the event source and its configuration, temperature, humidity, battery level and firmware version. LoRaWAN 1.0.2 class A, EU868 (ineosens_RFGroup1_1.0.2b_classA); decoded by spt-ineo:acs-sw-range-686:1.
ineosens:acs-switch:1addednew model: Ineo-Sense ACS-Switch — LoRaWAN opening and position detection sensor for doors, hatches and equipment, for site safety, fire monitoring and infrastructure control. Reports the switch state with active and inactive counters and activity rate, the event source, the device position, temperature and humidity. LoRaWAN 1.0.2 class A, EU868 (ineosens_RFGroup1_1.0.2a_classA); decoded by spt-ineo:acs-switch-534:1.
ineosens:trk-tracer-gps:1addednew model: Ineo-Sense TRK-Tracer-GPS — LoRaWAN GPS (GNSS) tracker for managing fleets of outsourced equipment. Reports GPS coordinates with HDOP, nearby Bluetooth beacons, events, temperature and battery level. LoRaWAN 1.0.2 class A, EU868 (ineosens_RFGroup1_1.0.2a_classA); decoded by spt-ineo:trk-tracer-653:1.

itron​

ModelChangeWhat changed
itron:cyble5-v2:1addedCyble 5 V2: LoRaWAN 1.0.4 profiles for EMEA (eu868, in865) and APAC (as923), supplied by Itron
itron:cyble5-v21:1addedCyble 5 V2.1: LoRaWAN 1.0.4 profiles with the extended NbTrans set by Itron's RFCT field tool (EMEA), APAC shared with V2

ixel​

ModelChangeWhat changed
ixel:loratic:1addednew model: IXEL LoRaTIC — LoRaWAN gateway reading the TIC (Tele-Information Client) output of French electricity meters. Reports the meter identifier, the energy indexes per tariff period, the current tariff period, instantaneous and maximum currents per phase, and the apparent power. LoRaWAN 1.0.2 class A, EU868 (ixel_RFGroup1_1.0.2a_classA); decoded by spt-ixel:loratic-136:1.

jri​

ModelChangeWhat changed
jri:lora-spy:1addednew model: JRI LoRa SPY — JRI LoRa SPY LoRaWAN temperature data logger. Depending on the model, it reports the temperature, the temperature and humidity, or the temperature with door-opening detection, with the logger status. LoRaWAN 1.0.2 class A, EU868 (jri_RFGroup1_1.0.2a_classA); decoded by spt-jrix:spy-smart-151:1.

lacroix​

ModelChangeWhat changed
lacroix:sofrel-iot:1addednew model: LACROIX Environment SOFREL IoT Sensor — Any sensor of the SOFREL IoT Sensor LoRaWAN range, decoded by the common parser of the range: depending on the model, indoor or outdoor temperature, humidity or CO2 concentration, with battery and self-test diagnostics. LoRaWAN 1.0.2 class A, EU868 (lacroix_RFGroup1_1.0.2a_classA); decoded by spt-lacr:generic-787:1.
lacroix:sofrel-t:1addednew model: LACROIX Environment SOFREL IoT Sensor T° — Energy-autonomous LoRaWAN temperature sensor of the SOFREL IoT Sensor range, used to monitor and optimize the energy performance of buildings. LoRaWAN 1.0.2 class A, EU868 (lacroix_RFGroup1_1.0.2b_classA); decoded by spt-lacr:sofrel-t-723:1.

mcf88​

ModelChangeWhat changed
mcf88:mcf-lw12co2:1updatedlink 1 imported SPOT driver protocolId (SPOT profile 566) — Adds spt-mcf8:lw12co2-566:1 to the protocolId list so the Objenious/SPOT devices of SPOT profile 566 (1 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.

nano-sensorics​

ModelChangeWhat changed
nanosnsr:powersense:1addedAdd Nano sensorics PowerSense energy submeter model (EU868, LoRaWAN 1.0.2, class A)

nemeus​

ModelChangeWhat changed
nemeus:nis-ul:1addednew model: Nemeus NIS-UL — LoRaWAN ultrasonic level sensor. Reports the distances measured by the ultrasonic sensor (1 to 300 cm), the internal temperature and the battery voltage, with the cause of each transmission. LoRaWAN 1.0.2 class A, EU868 (nemeus_RFGroup1_1.0.2a_classA); decoded by spt-neme:nis-ul-184:1.

nexelec​

ModelChangeWhat changed
nexelec:aero:1addednew model: Nexelec Aero — Indoor air-quality and comfort sensor powered over USB-C (I430LR). It measures CO2 (NDIR), total VOC, temperature, humidity, atmospheric pressure, light and noise (average and peak levels), shows the air-quality level on a coloured LED and sends its data over LoRaWAN. LoRaWAN 1.0.2 class A, EU868 (nexelec_RFGroup1_1.0.2b_classA); decoded by spt-nexe:aero-729:1.
nexelec:atmo:1updatedlink 1 imported SPOT driver protocolId (SPOT profile 726) — Adds spt-nexe:atmo-726:1 to the protocolId list so the Objenious/SPOT devices of SPOT profile 726 (24 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.
nexelec:carbon:1updatedlink 2 imported SPOT driver protocolIds (SPOT profiles 614, 561) — Adds spt-nexe:insafe-carbo-614:1, spt-nexe:insafe-carbo-561:1 to the protocolId list so the Objenious/SPOT devices of SPOT profiles 614, 561 (94 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.
nexelec:insafe:1updatedlink 1 imported SPOT driver protocolId (SPOT profile 754) — Adds spt-nexe:insafe-origi-754:1 to the protocolId list so the Objenious/SPOT devices of SPOT profile 754 (1 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.
nexelec:pilot:1updatedlink 1 imported SPOT driver protocolId (SPOT profile 613) — Adds spt-nexe:insafe-pilot-613:1 to the protocolId list so the Objenious/SPOT devices of SPOT profile 613 (470 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.

pyres​

ModelChangeWhat changed
pyrescom:city-light:1addedAdd Pyrescom EPnrj City Light model (EU868, LoRaWAN 1.0.4, class C)

rf-track​

ModelChangeWhat changed
rftrack:loramote-7:1addednew model: RF-TRACK LoRaMote 7 — RF-TRACK LoRaWAN GPS tracker. Reports the GPS position with the number of satellites, heading and speed, the geolocation status, battery level and usage rate. LoRaWAN 1.0.2 class A, EU868 (rftrack_RFGroup1_1.0.2a_classA); decoded by spt-rftr:loramote7-73:1 or spt-rftr:loramote7-26:1 depending on the firmware.

sagemcom​

ModelChangeWhat changed
sagemcom:ubifeel:1addednew model: Sagemcom Ubifeel — Sagemcom Ubifeel LoRaWAN multi-sensor. Reports temperature, battery level, acceleration on two axes and the axis of a detected shock. LoRaWAN 1.0.2 class A, EU868 (sagemcom_RFGroup1_1.0.2a_classA); decoded by spt-sage:ubifeel-70:1 or spt-sage:ubifeel-16:1 depending on the firmware.

senlab​

ModelChangeWhat changed
senlab:4ma-41ns:1updatedlink 4 imported SPOT driver protocolIds (SPOT profiles 308, 633, 362, 4) — Adds spt-sens:senlab-a-308:1, spt-sens:senlab-a-633:1, spt-sens:senlab-a-362:1, spt-sens:4ma-lab-33ns:1 to the protocolId list so the Objenious/SPOT devices of SPOT profiles 308, 633, 362, 4 (17 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.
senlab:led-41ns:1updatedlink 3 imported SPOT driver protocolIds (SPOT profiles 370, 326, 643) — Adds spt-sens:senlab-m-370:1, spt-sens:senlab-m-326:1, spt-sens:senlab-m-643:1 to the protocolId list so the Objenious/SPOT devices of SPOT profiles 370, 326, 643 (23 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.
senlab:pul-13xs:1updatedlink 3 imported SPOT driver protocolIds (SPOT profiles 639, 254, 365) — Adds spt-sens:senlab-m-639:1, spt-sens:senlab-m-254:1, spt-sens:senlab-m-365:1 to the protocolId list so the Objenious/SPOT devices of SPOT profiles 639, 254, 365 (179 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.
senlab:pul-41ns:1updatedlink 8 imported SPOT driver protocolIds (SPOT profiles 246, 94, 251, 261, 623, 256, 634, 635, 5, 97) — Adds spt-sens:senlab-m-246:1, spt-sens:senlab-m-251:1, spt-sens:senlab-m-261:1, spt-sens:senlab-m-623:1, spt-sens:senlab-m-256:1, spt-sens:senlab-m-634:1, spt-sens:senlab-m-635:1, spt-sens:pul-lab-21ns:1 to the protocolId list so the Objenious/SPOT devices of SPOT profiles 246, 94, 251, 261, 623, 256, 634, 635, 5, 97 (736 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.
senlab:tem-41ns:1updatedlink the imported SPOT driver protocolIds spt-sens:senlab-t:1 and 9 more — Adds spt-sens:senlab-t:1 to the protocolId list so the Objenious/SPOT devices of SPOT profile 368 (22 devices in the import file) can be reprovisioned on this ThingPark model. Matched on decoded content rather than on the SPOT label: the driver reports a SenlabT datalog of temperature measures. Appended last, so the model's default driver and its sensor validation are unchanged. Third batch (2026-09-28): also adds spt-sens:senlab-t-636:1, spt-sens:tem-lab-21ns:1, spt-sens:senlab-t-279:1, spt-sens:senlab-t-630:1, spt-sens:senlab-t-278:1, spt-sens:senlab-t-289:1, spt-sens:senlab-t-628:1, spt-sens:tem-lab-13ns:1, spt-sens:senlab-t-629:1 for SPOT profiles 636, 157, 103, 173, 158, 8, 279, 630, 278, 289, 628, 9, 629 (3203 devices in the SPOT inventory of 2026-09-25), matched on the device the SPOT profile describes and appended last as well.
senlab:thy-41ns:1updatedlink 7 imported SPOT driver protocolIds (SPOT profiles 238, 190, 236, 271, 637, 424, 7, 264) — Adds spt-sens:senlab-h-238:1, spt-sens:senlab-h-236:1, spt-sens:senlab-h-271:1, spt-sens:senlab-h-637:1, spt-sens:senlab-h-424:1, spt-sens:thy-lab-61ns:1, spt-sens:senlab-h-264:1 to the protocolId list so the Objenious/SPOT devices of SPOT profiles 238, 190, 236, 271, 637, 424, 7, 264 (369 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.

sewerin​

ModelChangeWhat changed
sewerin:sepem-351:1addednew model: Sewerin SePem 351 — Stationary LoRaWAN noise logger for continuous monitoring of drinking water networks, detecting leaks in the pipes within three days at the latest. LoRaWAN 1.0.2 class A, EU868 (sewerin_RFGroup1_1.0.2a_classA); decoded by spt-sewe:sepem-712:1.

taqt​

ModelChangeWhat changed
taqt:agora-2:1addednew model: Taqt Agora 2.0 — LoRaWAN satisfaction terminal with three vote buttons. Reports the vote counters and their share of the total, the badge reads, the terminal identifier and the battery voltage. LoRaWAN 1.0.2 class A, EU868 (taqt_RFGroup1_1.0.2a_classA); decoded by spt-agor:agora-79:1 or spt-agor:agora-21:1 depending on the firmware.

tekelek​

ModelChangeWhat changed
tekelek:tek-766:1updatedlink 5 imported SPOT driver protocolIds (SPOT profiles 211, 67, 209, 120, 68, 205, 207) — Adds spt-teke:tek-766-inc:1, spt-teke:tek-766-67:1, spt-teke:tek-766-cch-68:1, spt-teke:tek-766-cpp-205:1, spt-teke:tek-766-cch-207:1 to the protocolId list so the Objenious/SPOT devices of SPOT profiles 211, 67, 209, 120, 68, 205, 207 (57 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.

vega​

ModelChangeWhat changed
vega:vegapuls-air-41:1updatedlink the imported SPOT driver protocolId spt-vega:puls-41:1 — Adds spt-vega:puls-41:1 to the protocolId list so the Objenious/SPOT devices of SPOT profile 790 (1 device in the import file) can be reprovisioned on this ThingPark model. Matched on decoded content rather than on the SPOT label: the driver is the VEGAPULS 41 decoder. Appended last, so the model's default driver and its sensor validation are unchanged.

watteco​

ModelChangeWhat changed
watteco:alto:4addedAdd Watteco Alt'O model (radar water level sensor, EU868 class A) — Contributed by Watteco (PR #288). Driver watteco:alto:5.
watteco:atmo:4updatedlink 1 imported SPOT driver protocolId (SPOT profile 399) — Adds spt-nkew:meteo-batch:1 to the protocolId list so the Objenious/SPOT devices of SPOT profile 399 (49 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.
watteco:closo:4updatedlink the imported SPOT driver protocolId spt-nkew:clos-o:1 — Adds spt-nkew:clos-o:1 to the protocolId list so the Objenious/SPOT devices of SPOT profile 417 (1 device in the import file) can be reprovisioned on this ThingPark model. Matched on decoded content rather than on the SPOT label: the driver reports an opening state from BIC_Value. Appended last, so the model's default driver and its sensor validation are unchanged.
watteco:flasho:4updatedlink 2 imported SPOT driver protocolIds (SPOT profiles 124, 76) — Adds spt-nkew:flash-o-b-124:1, spt-nkew:pulse-sens-o-76:1 to the protocolId list so the Objenious/SPOT devices of SPOT profiles 124, 76 (96 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.
watteco:hygrotemp-remote:4updatedlink 1 imported SPOT driver protocolId (SPOT profile 732) — Adds spt-nkew:th-indoor-b-732:1 to the protocolId list so the Objenious/SPOT devices of SPOT profile 732 (2 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.
watteco:inclino:4updatedNew devices use the v2 driver watteco:inclino:6; provisioned devices keep watteco:inclino:5 — watteco:inclino:6 is listed first: default driver for new devices and BACnet/Modbus mapping owner.
watteco:ino:4updatedlink the imported SPOT driver protocolIds spt-nkew:in-o-139:1 and 1 more — Adds spt-nkew:in-o-139:1 to the protocolId list so the Objenious/SPOT devices of SPOT profile 139 (104 devices in the import file) can be reprovisioned on this ThingPark model. Matched on decoded content rather than on the SPOT label: the driver is the In'O Class C variant, counting index1..10 from BIC_Counter. Appended last, so the model's default driver and its sensor validation are unchanged. Third batch (2026-09-28): also adds spt-nkew:50-70-016-003:1 for SPOT profile 23 (1 devices in the SPOT inventory of 2026-09-25), matched on the device the SPOT profile describes and appended last as well.
watteco:modbus:4updatedlink 7 imported SPOT driver protocolIds (SPOT profiles 350, 618, 563, 658, 616, 708, 619) — Adds spt-nkew:modbus-rs485-350:1, spt-nkew:modbus-gener-618:1, spt-nkew:modbus-rs485-563:1, spt-nkew:modbus-itron-658:1, spt-nkew:modbus-kamst-616:1, spt-nkew:modbus-decod-708:1, spt-nkew:modbus-gener-619:1 to the protocolId list so the Objenious/SPOT devices of SPOT profiles 350, 618, 563, 658, 616, 708, 619 (7533 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.
watteco:monito:4updatedNew devices use the v2 driver watteco:monito:6; provisioned devices keep watteco:monito:5 — watteco:monito:6 is listed first: default driver for new devices and BACnet/Modbus mapping owner.
watteco:presso:4updatedlink the imported SPOT driver protocolIds spt-nkew:pulse-pres-bat:1 and 1 more — Adds spt-nkew:pulse-pres-bat:1 to the protocolId list so the Objenious/SPOT devices of SPOT profile 142 (38 devices in the import file) can be reprovisioned on this ThingPark model. Matched on decoded content rather than on the SPOT label: the driver reports a 4-20mA reading, which is what this model's analog gauge produces. Appended last, so the model's default driver and its sensor validation are unchanged. Third batch (2026-09-28): also adds spt-nkew:presso-batch:1 for SPOT profile 792 (28 devices in the SPOT inventory of 2026-09-25), matched on the device the SPOT profile describes and appended last as well.
watteco:pulse-s0:4addednew model: Watteco Pulse S0 — LoRaWAN sensor (50-70-001) with one S0 pulse input that makes water, gas, electricity or energy meters with a pulse output communicating. It counts the pulses and can report the input state. LoRaWAN 1.0.2 class A, EU868 (watteco_RFGroup1_1.0.2b_classA); decoded by spt-nkew:s0-348:1.
watteco:pulse-senso-atex:4updatedlink 2 imported SPOT driver protocolIds (SPOT profiles 682, 409) — Adds spt-nkew:pulse-sens-o-682:1, spt-nkew:pulse-sens-o-409:1 to the protocolId list so the Objenious/SPOT devices of SPOT profiles 682, 409 (163 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.
watteco:pulse-senso:4updatedlink the imported SPOT driver protocolIds spt-nkew:50-70-014-001:1 and 3 more — Adds spt-nkew:50-70-014-001:1 to the protocolId list so the Objenious/SPOT devices of SPOT profile 19 (302 devices in the import file) can be reprovisioned on this ThingPark model. Matched on decoded content rather than on the SPOT label: the driver counts pulses into index1..3 from BIC_Counter. Appended last, so the model's default driver and its sensor validation are unchanged. Third batch (2026-09-28): also adds spt-nkew:pulse-sens-o-75:1, spt-nkew:pulse-sens-o-681:1, spt-nkew:pulse-sens-o-441:1 for SPOT profiles 75, 681, 441 (625 devices in the SPOT inventory of 2026-09-25), matched on the device the SPOT profile describes and appended last as well.
watteco:smartplug:4updatedlink 2 imported SPOT driver protocolIds (SPOT profiles 62, 61) — Adds spt-nkew:smartplug-c:1, spt-nkew:smartplug-a:1 to the protocolId list so the Objenious/SPOT devices of SPOT profiles 62, 61 (34 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.
watteco:temp-remte-1-prb:4updatedlink the imported SPOT driver protocolId spt-nkew:temp-remote-bat:1 — Adds spt-nkew:temp-remote-bat:1 to the protocolId list so the Objenious/SPOT devices of SPOT profile 22 (39 devices in the import file) can be reprovisioned on this ThingPark model. Matched on decoded content rather than on the SPOT label: the driver reports a single Temperature series. Linked to Tempo remote 1 probe, the successor of the deprecated Remote Temperature model (watteco:remote-temp:4), which device-profiles.csv does not carry. Appended last, so the model's default driver and its sensor validation are unchanged.
watteco:th:4updatedlink 1 imported SPOT driver protocolId (SPOT profile 343) — Adds spt-nkew:th-indoor-batch:1 to the protocolId list so the Objenious/SPOT devices of SPOT profile 343 (269 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.
watteco:ticso:4updatedlink 3 imported SPOT driver protocolIds (SPOT profiles 397, 318, 77) — Adds spt-nkew:tic-pme-pmi-397:1, spt-nkew:tic-pmepmi-s-318:1, spt-nkew:tic-cpt-bleu-77:1 to the protocolId list so the Objenious/SPOT devices of SPOT profiles 397, 318, 77 (189 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.
watteco:triphaso:4updatedNew devices use the v2 driver watteco:triphaso:6; SPOT profile 542 linked through spt-nkew:triphaso-542:1 — watteco:triphaso:6 is listed first: default driver for new devices and BACnet/Modbus mapping owner (TXIF-4331). Adds spt-nkew:triphaso-542:1 to the protocolId list so the Objenious/SPOT devices of SPOT profile 542 (4 devices in the import file) can be reprovisioned on this ThingPark model. Matched on decoded content rather than on the SPOT label: the driver reports three-phase energy and power. Appended last, so the model's default driver and its sensor validation are unchanged. (TXIF-4314)
watteco:vaqao-plus:4updatedlink 1 imported SPOT driver protocolId (SPOT profile 595) — Adds spt-nkew:vaqao-batch:1 to the protocolId list so the Objenious/SPOT devices of SPOT profile 595 (13 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.
watteco:vaqao:4updatedlink 1 imported SPOT driver protocolId (SPOT profile 594) — Adds spt-nkew:vaqao-batch:1 to the protocolId list so the Objenious/SPOT devices of SPOT profile 594 (135 devices in the SPOT inventory of 2026-09-25) can be reprovisioned on this ThingPark model. Matched on the device the SPOT profile describes, preferring the models already in the catalog. Appended last, so the model's default driver and its sensor validation are unchanged.
watteco:ventilo:4updatedlink the imported SPOT driver protocolId spt-nkew:ventil-o-batch:1 — Adds spt-nkew:ventil-o-batch:1 to the protocolId list so the Objenious/SPOT devices of SPOT profile 443 (147 devices in the import file) can be reprovisioned on this ThingPark model. Matched on decoded content rather than on the SPOT label: the driver reports mean and minimal differential pressure. Appended last, so the model's default driver and its sensor validation are unchanged.
watteco:water-senso:4addednew model: Watteco Water Sens'O — LoRaWAN sensor (50-70-011) that clips onto an ARAD composite volumetric water meter and counts its disk rotations. It sends the water index, the minimum and maximum flow, and alarms for leakage, reverse flow, removal from the meter and freezing risk. LoRaWAN 1.0.2 class A, EU868 (watteco_RFGroup1_1.0.2b_classA); decoded by spt-nkew:sens-o-b-81:1.
Last updated on