Parameters configuration
Any parameter can be remotely modified with a downlink LoRaWAN message. Such messages are built according to the following format:
| Byte 0 | Byte 1 | Byte2 | Byte 3-6 |
|---|---|---|---|
| 0x0B | ACK | Parameter ID | New value [31-00] |
It is possible to modify up to 5 parameters in the same message by using the following format:
| Parameter 1 | Parameter 1 | Parameter 2 | Parameter 2 | ||
|---|---|---|---|---|---|
| Byte 0 | Byte 1 | Byte 2 | Byte 3-6 | Byte 7 | Byte 8-11 |
| 0x0B | ACK | Parameter ID 1 | New value 1 [31-00] | Parameter ID 1 | New value 1 [31-00] |
ACK: Acknowledge token. Refer to the section Acknowledge token Max value is 0x0F.
For details on available parameters, their identifiers and their values, please visit here.