Skip to main content

Provisioning your trackers on ThingPark Enterprise

This task consists of configuring your trackers on ThingPark Enterprise to forward all packets to and from the ThingPark Location application server provided by Actility on its platform.

Creating an application

You need to create a ThingPark Location application and associate it with your Abeeway devices.

  1. Log in to ThingPark Community platform using and click Sign up to create a free account. Then use this example URL to log in to your ThingPark Enterprise account:
  2. In ThingPark Enterprise, select Applications > Create, then click Generic Applications. img
  3. In Set Your Application, enter or select the following required information: img
NameThingPark Location
Content TypeXML
Tunnel Interface Authentication Keye8-95-9e-26-fd-9b-ce-52-70-06-05-a9-cf-e7-4d-53

If you are using some other ThingPark Location platform, please refer to ThingPark Location URLs

  1. Click Save.

Creating your tracker

To provision your tracker on the ThingPark Enterprise platform, you need to create a device. Your tracker is a LoRaWAN® OTAA device.
At the same time, you will associate it with the ThingPark Location application you have created.

Before you begin

Get the DevEUI, AppEUI, and AppKey of the tracker provided in your delivery note.

  1. In ThingPark Enterprise, select Devices > Create, then click Abeeway.
  2. In Enter Your Device Information, apply the configuration corresponding to your tracker as follows: img
ModelModel of the tracker. If any, select a tracker model compatible with your ISM band (EU/AS/US).
NameA name that helps you identify easily the tracker on your IoT network and ThingPark Enterprise portal.
DevEUILoRaWAN® globally unique identifier of the tracker. Provided within the tracker delivery note, it is composed of 16 hexadecimal digits (0 to 9, and A to F).
Activation modeOver The Air Activation (OTAA) with local JOIN server
JoinEUI (AppEUI)Global application identifier that uniquely identifies the application provider of the tracker. Provided within the tracker delivery note, it is composed of 16 hexadecimal digits (0 to 9, and A to F).
  1. In Associate Your Device With Your Application, select theThingPark Location application you have created to connect it to your tracker.

  2. In Set Your Device Location, Mode must be set to No location.

  3. Click Save.

    • The device is displayed in the devices list.
    • It is ready to communicate and has been associated with ThingPark Location.