Default delivered compact and industrial tracker configuration
This is the configuration that is applied on the trackers from the warehouse. The configuration files are here.
Please ensure to use the configuration files that match your firmware version to avoid flashing unknown or incompatible parameters.
Configuration Summary
The tracker is in standby operating mode. The tracker's mode must be set in motion, for positions to be sent using GPS technology every 5 minutes using dual random transmit strategy. The heartbeat is sent every 10 minutes.
Side operations setting:
- Periodic position reporting is disabled
- If no DL is received for 7 days, the tracker resets automatically (the network has certainly being lost)
- Geozoning, Collection payload, Angle detection, and Bluetooth (BLE) beaconing are deactivated
Configuration values
Any parameter not listed here will take the values of the Factory Defaut Configuration.
| Parameter Name | Parameter ID (Decimal) | Parameter ID (Hex) | Parameter Value (Decimal) |
|---|---|---|---|
| ul_period | 0 | (0x00) | 300 seconds |
| lora_period | 1 | (0x01) | 600 seconds |
| pw_stat_period | 2 | (0x02) | 0 (Disabled) |
| periodic_pos_period | 3 | (0x03) | 14400 |
| unknown | 4 | (0x04) | 0 |
| geoloc_sensor | 5 | (0x05) | 1 (GPS only) |
| geoloc_method | 6 | (0x06) | 1 (GPS only) |
| antenna | 7 | (0x07) | 0 |
| motion_nb_pos | 8 | (0x08) | 1 |
| gps_timeout | 9 | (0x09) | 240 seconds |
| agps_timeout | 10 | (0x0A) | 45 seconds |
| gps_ehpe | 11 | (0x0B) | 20 meters |
| gps_convergence | 12 | (0x0C) | 30 seconds |
| config_flags | 13 | (0x0D) | 213055 Bit0: Frame pending mechanism: Activated (1) Bit1: Very long button press to switch to off mode: Activated (1) Bit2: no more used (1) Bit3: Send a configuration confirmation uplink message: Activated (1) Bit4: WIFI payload without Cypher: Enabled (1) Bit5: BLE advertising when the device is turned on: Enabled (1) Bit6: Send a geoloc start event message when the geolocation starts. Disabled (0) Bit7: LED blinks when a GPS fix is received: Disabled (0) Bit8: Motion start message: Disabled (0) Bit9: Motion end message: Disabled (0) Bit10: OTA join when leaving the mode OFF: Disabled (0) Bit11: Asymmetric BLE pairing: Activated (0) Bit12: Long WIFI payload: Disabled (0) Bit13: Collection Long Report: Disabled (0) Bit14: Autostart of the tracker when leaving shipping mode: Activated (1) Bit15: Forbid the mode OFF: Disabled (0) Bit16: Melody played during SOS: Activated (1) Bit17: Automatic data rate selection: Activated (1) Bit18: Extended position payload : Disabled (0) bit19: Reserved, do not use bit 20: Enable the CLI over BLE: Disabled (0) bit 21: BLE passkey authentication enable. Deactivated (0) |
| transmit_strat | 14 | (0x0E) | 2 (Double transmit) |
| ble_beacon_cnt | 15 | (0x0F) | 4 |
| ble_beacon_timeout | 16 | (0x10) | 2 seconds |
| gps_standby_timeout | 17 | (0x11) | 43200 seconds |
| confirmed_ul_bitmap | 18 | (0x12) | 0 (None) |
| confirmed_ul_retry | 19 | (0x13) | 3 |
| motion_sensitivity | 20 | (0x14) | 131073 |
| shock_detection | 21 | (0x15) | 0 (Disabled) |
| periodic_activity_period | 22 | (0x16) | 0 (Disabled) |
| motion_duration | 23 | (0x17) | 180 seconds |
| geofencing_scan_period | 24 | (0x18) | 0 seconds |
| geofencing_collect_period | 25 | (0x19) | 60 seconds |
| ble_rssi_filter | 26 | (0x1A) | -85 dBm |
| temperature_high | 27 | (0x1B) | 255 (disabled) |
| temperature_low | 28 | (0x1C) | 255 (disabled |
| temperature_action | 29 | (0x1D) | 0 (No action) |
| transmit_strat_custom | 30 | (0x1E) | 0 |
| network_timeout_check | 31 | (0x1F) | 432000 seconds |
| network_timeout_reset | 32 | (0x20) | 172800 seconds |
| collection_scan_type | 33 | (0x21) | 0 (Disabled) |
| collection_nb_entry | 34 | (0x22) | 20 |
| collection_ble_filter_type | 35 | (0x23) | 0 |
| collection_ble_filter_main_1 | 36 | (0x24) | 0 |
| collection_ble_filter_main_2 | 37 | (0x25) | 0 |
| collection_ble_filter_sec_value | 38 | (0x26) | 0 |
| collection_ble_filter_sec_mask | 39 | (0x27) | 0 |
| battery_capacity | 40 | (0x28) | -1 (Use provisioned value. This parameter should not be modified) |
| reed_switch_configuration | 41 | (0x29) | 0 |
| gnss_constellation | 42 | (0x2A) | Europe, India, America, Australia: 2 (GPS and Glonass), Asia: 6 (GPS and Beidou) |
| prox_scan_pwr_min (Reserved(3)) | 43 | (0x2B) | -90 |
| prox_distance_coef (Reserved(3)) | 44 | (0x2C) | 200 |
| prox_scan_frequency (Reserved(3)) | 45 | (0x2D) | 1800 |
| prox_backtrace_max_age (Reserved(3)) | 46 | (0x2E) | 256 |
| prox_distance_sliding_window (Reserved(3)) | 47 | (0x2F) | 30 |
| prox_exposure_50 (Reserved(3)) | 48 | (0x30) | 200 |
| prox_exposure_100 (Reserved(3)) | 49 | (0x31) | 50 |
| prox_exposure_150 (Reserved(3)) | 50 | (0x32) | 22 |
| prox_exposure_200 (Reserved(3)) | 51 | (0x33) | 13 |
| prox_exposure_250 (Reserved(3)) | 52 | (0x34) | 0 |
| prox_exposure_300 (Reserved(3)) | 53 | (0x35) | 0 |
| prox_exposure_400 (Reserved(3)) | 54 | (0x36) | 0 |
| prox_alarm_dist_immediate (Reserved(3)) | 55 | (0x37) | 0.1 |
| prox_alarm_exposure (Reserved(3)) | 56 | (0x38) | 12000 |
| prox_warn_dist_immediate (Reserved(3)) | 57 | (0x39) | 1.0 |
| prox_warn_exposure (Reserved(3)) | 58 | (0x3A) | 6000 |
| prox_record_dist_immediate (Reserved(3)) | 59 | (0x3B) | 2 |
| prox_record_exposure (Reserved(3)) | 60 | (0x3C) | 3700 |
| prox_alarm_buz_duration (Reserved(3)) | 61 | (0x3D) | 5 |
| prox_warn_buz_duration (Reserved(3)) | 62 | (0x3E) | 5 |
| prox_contact_policy (Reserved(3)) | 63 | (0x3F) | 0 |
| prox_scan_duration (Reserved(3)) | 64 | (0x40) | 1 |
| prox_scan_window (Reserved(3)) | 65 | (0x41) | 120 |
| prox_scan_interval (Reserved(3)) | 66 | (0x42) | 125 |
| prox_alarm_remanence (Reserved(3)) | 67 | (0x43) | 30 |
| prox_warn_remanence (Reserved(3)) | 68 | (0x44) | 30 |
| prox_bcn_repeat (Reserved(3)) | 69 | (0x45) | 100 |
| prox_bcn_tx_power (Reserved(3)) | 70 | (0x46) | -41 |
| prox_reminder_period (Reserved(3)) | 71 | (0x47) | 20 |
| prox_reminder_distance (Reserved(3)) | 72 | (0x48) | 20 |
| prox_warn_disable_dist (Reserved(3)) | 73 | (0x49) | 25 |
| prox_alarm_disable_dist (Reserved(3)) | 74 | (0x4A) | 25 |
| prox_max_speed_filter (Reserved(3)) | 75 | (0x4B) | 15 |
| prox_max_update (Reserved(3)) | 76 | (0x4C) | 3600 |
| position_ble_filter_type | 77 | (0x4D) | 0 |
| position_ble_filter_main_1 | 78 | (0x4E) | 0 |
| position_ble_filter_main_2 | 79 | (0x4F) | 0 |
| position_ble_filter_sec_value | 80 | (0x50) | 0 |
| position_ble_filter_sec_mask | 81 | (0x51) | 0 |
| position_ble_report_type | 82 | (0x52) | 0 |
| buzzer_volume | 83 | (0x53) | 100% - Micro Tracker 10% for Smart Badge |
| angle_detect_mode | 84 | (0x54) | 0 (Disabled) |
| angle_ref_acq | 85 | (0x55) | 2 |
| angle_ref_acc_x | 86 | (0x56) | 0 |
| angle_ref_acc_y | 87 | (0x57) | 0 |
| angle_ref_acc_z | 88 | (0x58) | 0 |
| angle_critical | 89 | (0x59) | 30 |
| angle_critical_hyst | 90 | (0x5A) | 5 |
| angle_report_mode | 91 | (0x5B) | 1 |
| angle_report_period | 92 | (0x5C) | 300 seconds |
| angle_report_repeat | 93 | (0x5D) | 0 |
| angle_rising_time | 94 | (0x5E) | 5 |
| angle_falling_time | 95 | (0x5F) | 5 |
| angle_learning_time | 96 | (0x60) | 5 |
| angle_acc_accuracy | 97 | (0x61) | 100 |
| angle_deviation_delta | 98 | (0x62) | 0 |
| angle_deviation_min_interval | 99 | (0x63) | 10 |
| angle_deviation_max_interval | 100 | (0x64) | 0 |
| default_profile | 101 | (0x65) | 0 (None) |
| password | 102 | (0x66) | 123 |
| gps_t0_timeout | 103 | (0x67) | 15 seconds |
| gps_fix_timeout | 104 | (0x68) | 0 seconds |
| geofencing_scan_duration | 105 | (0x69) | 370 msec |
| beaconing_type | 106 | (0x6A) | 0 (Disabled) |
| beaconing_tx_power | 107 | (0x6B) | 2 (0 dBm) |
| beaconing_static_interval | 108 | (0x6C) | 10000 msec |
| beaconing_motion_interval | 109 | (0x6D) | 333 msec |
| beaconing_motion_duration | 110 | (0x6E) | 20 seconds |
| ble_cnx_adv_duration | 111 | (0x6F) | 600 seconds |
| beacon_id_0 | 112 | (0x70) | 0 |
| beacon_id_1 | 113 | (0x71) | 0 |
| beacon_id_2 | 114 | (0x72) | 0 |
| beacon_id_3 | 115 | (0x73) | 0 |
| beacon_id_4 | 116 | (0x74) | 0 |
| sos_period | 117 | (0x75) | 120 seconds |
| motion_debounce | 118 | (0x76) | 1 (20 msec) |
| button_mapping | 119 | (0x77) | 74768 Bit0-3:0000 (Button press: no action) Bit4-7:0001 (Button click: battery level with LEDs) Bit8-11:0100 (Double click: No action) Bit12-15:0010 (Triple click: start/stop SOS) Bit16-19:0001 (Button long press duration = 1 second) |
| default_datarate | 120 | (0x78) | -1 |
| gps_ehpe_motion | 121 | (0x79) | 40 seconds |
| gps_convergence_motion | 122 | (0x7A) | 20 seconds |
| gps_t0_timeout_motion | 123 | (0x7B) | 30 seconds |
| Special Parameters | |||
| ble_cli_active | 245 | (0xF5) | 0 (Disabled) |
| profile | 246 | (0xF6) | 0 (None) |
| consumption | 247 | (0xF7) | 0 mAh |
| ble_bond_info | 248 | (0xF8) | 1 |
| mode | 249 | (0xF9) | 0 (Standby) |
| acc_x_axis (Read only) | 250 | (0xFA) | -215 |
| acc_y_axis (Read only) | 251 | (0xFB) | -158 |
| acc_z_axis (Read only) | 252 | (0xFC) | 975 |
| ble_version (Read only) | 253 | (0xFD) | 197380 |
| firmware_version (Read only) | 254 | (0xFE) | 132096 |
Notes
-
New parameters or if their default values changed have been marked bold.
-
Default parameter values are subject to change. The tracker configuration can be obtained with a downlink or by entering a CLI command (config show) on the serial terminal connected to the tracker with USB cable.
-
Please use MCU FW 2.3 and below for proximity feature. Proximity feature is removed starting from AT 2.4.