Factory default configuration
It is the configuration of the trackers after a firmware update if the firmware update is done only with the firmware binary without the configuration file. The parameter values below are compiled in the firmware and used if the configuration file does not provide the parameter value.
The output below can be easily contructed by doing config show once the firmware is flashed without the configuration file by connecting the tracker to CLI terminal using USB cable.
| Parameter Name | Parameter ID (Decimal) | Parameter ID (Hex) | Parameter Value (Decimal) |
|---|---|---|---|
| ul_period | 0 | (0x00) | 300 |
| lora_period | 1 | (0x01) | 600 |
| pw_stat_period | 2 | (0x02) | 0 |
| periodic_pos_period | 3 | (0x03) | 0 |
| unknown | 4 | (0x04) | 0 |
| geoloc_sensor | 5 | (0x05) | 1 |
| geoloc_method | 6 | (0x06) | 1 |
| antenna | 7 | (0x07) | 0 |
| motion_nb_pos | 8 | (0x08) | 1 |
| gps_timeout | 9 | (0x09) | 240 |
| agps_timeout | 10 | (0x0A) | 45 |
| gps_ehpe | 11 | (0x0B) | 20 |
| gps_convergence | 12 | (0x0C) | 30 |
| config_flags | 13 | (0x0D) | 213055 |
| transmit_strat | 14 | (0x0E) | 2 |
| ble_beacon_cnt | 15 | (0x0F) | 4 |
| ble_beacon_timeout | 16 | (0x10) | 2 |
| gps_standby_timeout | 17 | (0x11) | 0 |
| confirmed_ul_bitmap | 18 | (0x12) | 0 |
| confirmed_ul_retry | 19 | (0x13) | 3 |
| motion_sensitivity | 20 | (0x14) | 131073 |
| shock_detection | 21 | (0x15) | 0 |
| periodic_activity_period | 22 | (0x16) | 0 |
| motion_duration | 23 | (0x17) | 180 |
| geofencing_scan_period | 24 | (0x18) | 0 |
| geofencing_collect_period | 25 | (0x19) | 60 |
| ble_rssi_filter | 26 | (0x1A) | -85 |
| temperature_high | 27 | (0x1B) | 255 |
| temperature_low | 28 | (0x1C) | 255 |
| temperature_action | 29 | (0x1D) | 0 |
| transmit_strat_custom | 30 | (0x1E) | 0 |
| network_timeout_check | 31 | (0x1F) | 432000 |
| network_timeout_reset | 32 | (0x20) | 172800 |
| collection_scan_type | 33 | (0x21) | 0 |
| collection_nb_entry | 34 | (0x22) | 20 |
| collection_ble_filter_type | 35 | (0x23) | 0 |
| collection_ble_filter_main_1 | 36 | (0x24) | 0 |
| collection_ble_filter_main_2 | 37 | (0x25) | 0 |
| collection_ble_filter_sec_value | 38 | (0x26) | 0 |
| collection_ble_filter_sec_mask | 39 | (0x27) | 0 |
| battery_capacity | 40 | (0x28) | -1 |
| reed_switch_configuration | 41 | (0x29) | 0: Micro Tracker/Smart Badge/Industrial Tracker 3: Compact Tracker |
| gnss_constellation | 42 | (0x2A) | 4 |
| prox_scan_pwr_min | 43 | (0x2B) | -90 |
| prox_distance_coef | 44 | (0x2C) | 200 |
| prox_scan_frequency | 45 | (0x2D) | 1800 |
| prox_backtrace_max_age | 46 | (0x2E) | 256 |
| prox_distance_sliding_window | 47 | (0x2F) | 30 |
| prox_exposure_50 | 48 | (0x30) | 200 |
| prox_exposure_100 | 49 | (0x31) | 50 |
| prox_exposure_150 | 50 | (0x32) | 22 |
| prox_exposure_200 | 51 | (0x33) | 13 |
| prox_exposure_250 | 52 | (0x34) | 0 |
| prox_exposure_300 | 53 | (0x35) | 0 |
| prox_exposure_400 | 54 | (0x36) | 0 |
| prox_alarm_dist_immediate | 55 | (0x37) | 1 |
| prox_alarm_exposure | 56 | (0x38) | 12000 |
| prox_warn_dist_immediate | 57 | (0x39) | 10 |
| prox_warn_exposure | 58 | (0x3A) | 6000 |
| prox_record_dist_immediate | 59 | (0x3B) | 20 |
| prox_record_exposure | 60 | (0x3C) | 3700 |
| prox_alarm_buz_duration | 61 | (0x3D) | 5 |
| prox_warn_buz_duration | 62 | (0x3E) | 5 |
| prox_contact_policy | 63 | (0x3F) | 0 |
| prox_scan_duration | 64 | (0x40) | 10 |
| prox_scan_window | 65 | (0x41) | 120 |
| prox_scan_interval | 66 | (0x42) | 125 |
| prox_alarm_remanence | 67 | (0x43) | 30 |
| prox_warn_remanence | 68 | (0x44) | 30 |
| prox_bcn_repeat | 69 | (0x45) | 100 |
| prox_bcn_tx_power | 70 | (0x46) | -41 |
| prox_reminder_period | 71 | (0x47) | 20 |
| prox_reminder_distance | 72 | (0x48) | 20 |
| prox_warn_disable_dist | 73 | (0x49) | 25 |
| prox_alarm_disable_dist | 74 | (0x4A) | 25 |
| prox_max_speed_filter | 75 | (0x4B) | 15 |
| prox_max_update | 76 | (0x4C) | 3600 |
| position_ble_filter_type | 77 | (0x4D) | 0 |
| position_ble_filter_main_1 | 78 | (0x4E) | 0 |
| position_ble_filter_main_2 | 79 | (0x4F) | 0 |
| position_ble_filter_sec_value | 80 | (0x50) | 0 |
| position_ble_filter_sec_mask | 81 | (0x51) | 0 |
| position_ble_report_type | 82 | (0x52) | 0 |
| buzzer_volume | 83 | (0x53) | 10 |
| angle_detect_mode | 84 | (0x54) | 0 |
| angle_ref_acq | 85 | (0x55) | 2 |
| angle_ref_acc_x | 86 | (0x56) | 0 |
| angle_ref_acc_y | 87 | (0x57) | 0 |
| angle_ref_acc_z | 88 | (0x58) | 0 |
| angle_critical | 89 | (0x59) | 30 |
| angle_critical_hyst | 90 | (0x5A) | 5 |
| angle_report_mode | 91 | (0x5B) | 1 |
| angle_report_period | 92 | (0x5C) | 300 |
| angle_report_repeat | 93 | (0x5D) | 0 |
| angle_rising_time | 94 | (0x5E) | 5 |
| angle_falling_time | 95 | (0x5F) | 5 |
| angle_learning_time | 96 | (0x60) | 5 |
| angle_acc_accuracy | 97 | (0x61) | 100 |
| angle_deviation_delta | 98 | (0x62) | 0 |
| angle_deviation_min_interval | 99 | (0x63) | 10 |
| angle_deviation_max_interval | 100 | (0x64) | 0 |
| default_profile | 101 | (0x65) | 0 |
| password | 102 | (0x66) | 123 |
| gps_t0_timeout | 103 | (0x67) | 30 |
| gps_fix_timeout | 104 | (0x68) | 0 |
| geofencing_scan_duration | 105 | (0x69) | 370 |
| beaconing_type | 106 | (0x6A) | 0 |
| beaconing_tx_power | 107 | (0x6B) | 2 |
| beaconing_static_interval | 108 | (0x6C) | 10000 |
| beaconing_motion_interval | 109 | (0x6D) | 333 |
| beaconing_motion_duration | 110 | (0x6E) | 20 |
| ble_cnx_adv_duration | 111 | (0x6F) | 600 |
| beacon_id_0 | 112 | (0x70) | 0 |
| beacon_id_1 | 113 | (0x71) | 0 |
| beacon_id_2 | 114 | (0x72) | 0 |
| beacon_id_3 | 115 | (0x73) | 0 |
| beacon_id_4 | 116 | (0x74) | 0 |
| sos_period | 117 | (0x75) | 120 |
| motion_debounce | 118 | (0x76) | 1 |
| button_mapping | 119 | (0x77) | 74768 |
| default_datarate | 120 | (0x78) | -1 |
| gps_ehpe_motion | 121 | (0x79) | 40 |
| gps_convergence_motion | 122 | (0x7A) | 20 |
| gps_t0_timeout_motion | 123 | (0x7B) | 30 |
| Special Parameters | |||
| ble_cli_active | 245 | (0xF5) | 0 |
| profile | 246 | (0xF6) | 0 |
| consumption | 247 | (0xF7) | 0 |
| ble_bond_info | 248 | (0xF8) | 1 |
| mode | 249 | (0xF9) | 0 |
| acc_x_axis (Read only) | 250 | (0xFA) | -215 |
| acc_y_axis (Read only) | 251 | (0xFB) | -158 |
| acc_z_axis (Read only) | 252 | (0xFC) | 975 |
| ble_version (Read only) | 253 | (0xFD) | 197380 |
| firmware_version (Read only) | 254 | (0xFE) | 132096 |
Notes
(1) New parameters in this firmware or the parameter factory values modified from previous firmware version have their names bolded.
(2) Please visit here for the definition of click, press, long press, etc.
(3) Please use MCU FW 2.3 and below for proximity feature. Proximity feature is removed starting from AT 2.4.