Request device configuration
| Byte 0 | Byte 1 | Byte 2-21 |
|---|---|---|
| 0x03 | ACK | Parameter ID list (otpional) |
ACK: Acknowledge token. Refer to the section Acknowledge token Max value is 0x0F .
Parameter ID list: List of requested parameters identifiers.
- Each byte contains a single identifier.
- Parameter IDs are the ones used to configure the device (Refer to the section Firmware Parameters).
- If the list is empty, all the parameters are requested.
Notes
- The tracker answers this request with a Configuration uplink message (section Configuration message).
- Each uplink can contain up to 5 parameters.
- If the number of parameters is greater than 5, the tracker will send the needed number of uplinks to fulfill the request.