Micro tracker device

Getting started

• Charge your device using a micro-USB cable. While charging the white LED is ON. When the battery is fully charged, the white LED goes OFF.
• The micro tracker is shipped to the customer in "shipping" state to preserve battery lifetime. It can be brought back into "JOIN" state with a long button press. The tracker will then start the JOIN procedure which can be seen in LoRaWAN Network Server logs.
• A long press is needed to turn ON the device (After a join success it starts in motion tracking mode in the default configuration, (For more details on the default configuration of the micro tracker see here).

Notes

Please refer to the Startup process topic for more details on the startup behaviour of the tracker.

Tracker best placement

The device can be attached with the provided lanyard or placed in a bag, or inside an asset. It is recommended to place the tracker in a way that LoRaWAN/GPS antennas are pointing towards the sky for best LoRaWAN/GPS coverage.

Warning

• The tracker should not be submerged in water or left in the presence of high-pressure water jets for prolonged duration in high pressure water jets as the water will get inside the casing eventually and damage the tracker. Incorrect placement of the tracker will void the guarantee.
• The tracker should not be left with low battery/completely discharged for more than a month. We recommend to periodically charge the tracker at least once a month. The warranty is void if the battery of the tracker is not functional as it was not charged for prolonged period.
• The close environment and orientation of the tracker can influence the radio performance. For optimum results keep the zone around the antenna area clear from any conducting material, magnetic fields or close contact with skin/body parts.