Documentation updates
This topic gives you an overview of the new and enhanced functionalities of ThingPark Wireless 7.1 that:
-
Have an impact on the user experience
-
Have been implemented so far in ThingPark Wireless Customers & Partners documentation.
To learn more about the related features, their activation and how you can benefit from their usage, click Release notes.
Device Manager User Guide
What’s new in Device Manager User Guide 6.1?
| New /enhanced documented functionality | For more information, see… |
|---|---|
| RDTP-13472 If the creation, import or deletion of devices takes time, a message tells you that you will receive an email when finished. | Creating an OTAA device |
| OTAA devices All join server modes available in a same Device Manager subscription. When creating the device, you can select the join server mode on which you want the device to do its join procedure (RDTP-2248). If using local joint server with HSM protection, you must activate the HSM on an AS Routing Profile (NFR 274). | Creating an OTAA device
Viewing general information, activity summary and location of a device |
| RDTP-12998 , RDTP-5843 To allow further investigation for troubleshooting purpose, the alarm history panel of the device displays the last status before clearance of alarms that have been cleared during the past 15 days. Also applies to multicast groups. | Managing alarms
Configuring an inactivity alarm Managing the alarms of a multicast group About alarm notification emails Viewing/Setting an alarm notification email in advanced mode |
| RDTP-12367 You or your operator can define ISM bands to display only compatible models when creating or updating devices. | Restricting device models according to supported ISM bands |
| Clarification about using several routes in an application server to direct and distribute uplink reports according to the FPort. | Routes and destination URLs for HTTP application servers |
What’s new in Device Manager User Guide 6.0?
| New /enhanced documented functionality | For more information, see… |
|---|---|
| RDTP-6887 Enhanced security using standardized authentication flow modifies slightly the screens related to logging in, log in troubleshooting and password reset. | Logging in for the first time |
| RDTP-2488 According to the group associated with your end-user account, you can have read-write or read-only access to Device Manager. If you have read-only access, Device Manager displays read-only information. | Opening a panel and checking your read-write access
All related topics are updated accordingly. |
| RDTP-2210 Current class for LoRaWAN® devices: Class B devices display their current class in black if not switched to class B. When ready to switch, they report their ping-slot period and display their current class in green. Class A and C devices always display it in green. | Viewing general information, activity summary and location of a device |
| Clarification about using several routes in an application server to direct and distribute uplink reports according to the FPort. | Routes and destination URLs for HTTP application servers |
Network Manager User Guide
What’s new in Network Manager User Guide 6.1?
| New /enhanced functionality | For more information, see… |
|---|---|
| RDTP-8150 Clean-up of ISM band list. | Restricting base station models and RF regions |
| RDTP-2266 Enhanced LRR buffering capabilities. | IEC uplink queue |
| RDTP-8486 Masking unwanted profiles from the base station profile & RF region catalogs. | Creating a base station |
| RDTP-12367 Filter base station profiles & RF regions based on ISM band. | Updating RF region |
| RDTP-4163 New base station alarm to monitor GPS state. | System alarms |
What’s new in Network Manager User Guide 6.0?
| New /enhanced functionality | For more information, see… |
|---|---|
| RDTP-2543 Support multiple RX2 / Pingslots per RF Region. | Base station RF cell information |
| RDTP-248 Read-only (Viewer) mode. | Provisioning a base station |
| RDTP-2467 Configuring Spectrum Analysis in Network Manager. | Spectrum analysis |
| RDTP-2174, NFR920 Global LRR configuration enhancements. | LRR advanced administration using SUPLOG |
Wireless Logger User Guide
What’s new in Wireless Logger User Guide 6.1?
| New /enhanced functionality | For more information, see… |
|---|---|
| RDTP-2643 Filter by message type/direction in Wireless Logger. | Searching packets |
| RDTP-9170 Integration of IoT Flow drivers in Wireless Logger. | Decoding LoRaWAN® payloads |
| RDTP-8155 Enhanced display of JOIN messages in Wireless Logger. | Uplink packets |
| RDTP-3156 Reporting of the type of algorithm used by LocSolver for each Location Report. | Location reports |
What’s new in Wireless Logger User Guide 6.0?
| New /enhanced functionality | For more information, see… |
|---|---|
| RDTP-2543 Support multiple RX2 / Pingslot channels per RF region. | Downlink metadata columns |
| RDTP-7009 Show uplink frequency besides uplink Logical Channel. | Uplink expandable panel |
| RDTP-8672 Show downlink frequency besides downlink Logical Channel. | Downlink expandable panel |
| RDTP-6024 Device reset notification. | Device reset reports |
| RDTP-2210 Report device's current LoRaWAN® class + pingslot periodicity. | |
| RDTP-5787 Improve Wireless Logger display when DL packets are sent for repeated UL packets. | Downlink packets |
| RDTP-2543 Support multiple RX2 / Pingslot channels per RF region. | Downlink metadata columns |
Supplier User Guide
What's new in Supplier User Guide 6.1?
| New /enhanced functionalities | For more information, see… |
|---|---|
| HTML version of Supplier User Guide applying to ThingPark Wireless 6.0 and 6.1. | Supplier User Guide |
| RDTP-9369 New graphical interface for the Connectivity Manager application. | Using Connectivity Manager |
| RDTP-8676 All new connectivity plans use ADRv3. Existing connectivity plan can upgrade to ADRv3 but cannot revert. | Changing the advanced LoRaWAN profiling of a unicast LoRaWAN® connectivity plan |
What's new in Supplier User Guide 6.0?
| New /enhanced functionalities | For more information, see… |
|---|---|
| RDTP-2488 Administrators assigned to the Viewers security group have read-only access to all the applications/tabs available. For application supporting the functionality, you can enable access permissions for end-users when creating the application. | Managing administrators rights |
Vendor User Guide
What's new in Vendor User Guide 6.1?
| New /updated content | For more information, see… |
|---|---|
| HTML version of Vendor User Guide applying to ThingPark Wireless 6.0 and 6.1. | Vendor User Guide |
ThingPark Wireless documentation library
More updates
| New /updated content | For more information, see… |
|---|---|
| Familiarize yourself with ThingPark Wireless watching videos. | ThingPark Wireless video tour |
| Explore ThingPark DX API using ThingPark DX API platform. | ThingPark DX API platform |
| New version of LRC-AS Tunnel Interface Developer Guide (LoRaWAN®) applying to ThingPark Wireless 6.1. | LRC-AS Tunnel Interface Developer Guide |