Location reports
The location report 
informs
asynchronously about the geolocation data associated to the current
uplink packet (current FCntUp), as soon as available from the
location solver.
In the expandable panel of the location report, the following
information is available:
| Metadata | Description |
|---|---|
| Device Lat and Lon | Latitude and longitude estimated by ThingPark Location Solver. |
| Location radius | Defines a horizontal circle inside which the position of the device is estimated. |
| Location time | Indicates the time when the device location was estimated by the Location Solver engine. |
| Altitude and Altitude radius | Estimated device altitude. The altitude radius defines a vertical circle inside of which the altitude of the device is estimated |
| Accuracy | Estimated accuracy of the device location. |
| Velocity estimation | Device velocity (North & East direction) expressed in m/s. |
| Device location method used | Determines whether the Location Solver engine used TDoA (Time based) or RSSI algorithm to generate the location report in question. This information is particularly interesting when the geolocation algorithm is configured to use both TDoA and RSSI modes. |
| Status | Transmission status of the report sent by the LRC to the Application Server identified by the AS ID. Two possibles values are: OK or Error. In case of error, a message is displayed in the Transmission errors column. Note This status is only relevant for "Basic HTTP" type of connections. Delivery errors related to TPX connections are currently not visible in Wireless Logger. |
| Transmission errors | Idx: Index of the destination that caused the error. Starting value at 0. Url: The destination URL that returned the error. An HTTP Application Server can be configured with several destination URLs. Status: - Timeout: The report was not successfully acknowledged by the destination within the expected timeframe. - Error: The report was rejected by the destination. (HTTP error, network error, DNS error). - Overload: The report was not sent to the destination because the network server reached the OVERLOAD state and the destination's average round trip time is too bad. - Blacklist: The report was not sent to the destination because the network server reached the BLACKLIST state and the destination's average round trip time is bad. - Unreachable: The report was not sent to the destination because this destination was deemed unreachable due to irresponsive behavior over the last observation window. Note This information is only relevant for "Basic HTTP" type of connections. Delivery errors related to TPX connections are currently not visible in Wireless Logger. |