Filtering base station alarms

You can use filters to restrict the number of base station alarms in the ALARM DETAILS list.

By default, this list displays not acknowledged active alarms with the Min.State: INDETERMINATE and Acked: No filters set. If you change filters, your selection is saved in your web browser and applies to the same computer.

1. Click Alarms.

2. In the ALARM DETAILS list, select the Base Stations tab.

3. If Active filters is displayed:

   • To clear all active values of a same filter, click the filter cross.

   • To delete all active filters, click Clear all.

   • To edit the active filters, click Edit filters.

4. If no filter is active, click Add filter.

5. In the Filter devices alarms dialog box that opens, restrict your search using at least one filter.

   Filter	Description
   LRR ID	8 characters hexadecimal string with or without separating dashes. Retrieves alarms triggered on the base station associated with the specified LRR ID. Tips You can copy and paste a LRR ID you get from the traffic shown by Wireless Logger application to investigate further a base station.
   Created after	Retrieves alarms created after the specified date.
   Updated before	Retrieves alarms updated before the specified date.
   Alarm name	Retrieves all triggered alarms or the specified alarm. See all base station alarms and their meaning in Alarms used for troubleshooting base stations.
   Clearance status	Retrieves all alarms, only active alarms (with a state different than CLEARED), or only cleared alarms (with a state equal to CLEARED) triggered on the returned base station or base stations. For more information about active and cleared alarms, see Alarm's concepts.
   Minimum severity	All or one minimum severity level. Retrieves active alarms having a severity equal to the selected severity or higher. For more information about base station alarms and their severity, see the severity states table in Viewing alarms in the user interface.
   Ack status	Retrieves All, Not acknowledged, or Acknowledged alarms triggered on the returned base station or base stations. For more information about acknowledged alarms, see Alarm's concepts.

   If the segregation based on domains has been enabled by an administrator user, a Domains filter allows to only display base station alarms associated with one of the specified domains. See Domains for more details.

6. Click Apply.