Connecting to SUPLOG
The base station image is typically configured with DHCP activated by default. If you have not yet identified the IP address of your base station, you may use a software like Advanced IP scanner and match the MAC address (see the base station sticker to retrieve the MAC address).
Connect in SSH to the base station with Support account. Credentials for the Support account are the following ones:
Password: Ask your Channel partner, System Integrator or ThingPark Support team to get the corresponding password. Note that this password is different between TPW, TPE-OCP and TPE-SAAS base station images.
Note For putty users, you should configure the option "Allow ACS line drawing in UTF" to get an improved display.
A successful login with the Support account will display the SUPLOG menu:
Use the following keys to navigate inside SUPLOG:
<Tab>, <Right arrow> : move to actions’ buttons, then return to the initial position.
<Up arrow> / <Down arrow> : change position in menus or navigate inside forms.
<Enter> : select a menu item or validate an action.
<Space> : activate/deactivate a choice inside forms.
<F12>: move to next screen.
Note Throughout SUPLOG menus, editable fields are displayed in blue, while read-only fields are displayed in white.