Configuring WiFi connectivity for Browan MiniHub

  1. After powering-up your MiniHub, either by USB or by an outlet, scan from your computer the available WiFi networks. You should find a network named “MINIHUB_<last 6 characters of the field (92) printed on the base station’s sticker>”.

    Graphical user interface, application

Description automatically generated

  1. Connect to that WiFi using the default password: 12345678.

  2. Using your browser, connect to, select the WiFi the MiniHub should use and enter the password if applicable.

    Graphical user interface, text, application, email

Description automatically generated

  1. You should then see a confirmation message letting you know that the MiniHub connected to that WiFi successfully:

    Graphical user interface, text

Description automatically generated

Note While the message seems to indicate that you can connect to the MiniHub on its web interface, it is only available in AP mode. To be able to connect again to the MiniHub web interface, you need to reactivate the AP mode, pushing the “setup” button for ~10 sec.