Skip to main content
Version: TAO v2.x

Configuring NTP Servers

Do the following steps to configure one or several NTP servers (up to three) and optionally configure the time zone if needed.

  • Select System configuration, press Enter key:

  • Select Network, press Enter key:

  • Select Network interfaces, press Enter key:

  • Select NTP and press Enter key:

  • Change the NTP servers list.
  • Move to Confirm, press Enter key.
  • Mve to Back, press Enter key.
  • Move to Apply, press Enter key.
  • After reconfiguration, commit your configuration.