Skip to main content
Version: TAO v1.x

Step 3 - configuring your base station

From the left panel of the user interface, go to the Base Station dashoard and scroll down to the "Configuration" widget:

Changing the RF Region configuration

The RF Region has been configured during your first-time login, but you may change it at any time from the user interface.

  • Click on the "PEN" icon

  • In the drop-down list, select your new region. You may start typing your search text to quickly find your target configuration. To learn more about selecting the right RF Region for your deployment, see RF regions

  • Click on the validation icon when finished

  • Wait about 1 minute for the Base Station to reconfigure, you can receive temporary errors during that phase.

Setting the antenna gain and cable loss

Set Antenna Gain and Cable loss as per the following table:

ModelAntenna GainCable loss
Ufispace pico (external antenna)1.5 dBi0 dB
Ufispace enterprise (internal antenna)1.4 dBi0 dB
Ufispace macro v1.5 & Browan Outdoor Micro (ODU)Depends on antenna modelTypically ~ 0.5 dB but depends on installation
Milesight UG650 dBi0 dB
Milesight UG67Depends on antenna modelTypically ~ 0.5 dB but depends on installation
Kerlink iFemtoCell3 dBi0.5 dB
Kerlink iFemtoEvo3 dBi0.5 dB
Kerlink iStationDepends on antenna modelTypically ~ 0.5 dB but depends on installation
Browan indoor Femto0 dBi0 dB
Note

Network configuration of the base station is exclusively managed through the Suplog user interface, as described by the following guidelines: