Skip to main content
Version: TAO v1.x

Suplog - configuring the WiFi interface

The gateway is originally configured for ethernet with DHCP, follow these steps to configure the WiFi mode.

Five steps are required:

  • Step 1: Configure your WiFi credentials
  • Step 2: Deactivate eth0
  • Step 3: Activate wlan0
  • Step 4: Apply the configuration
  • Step 5: Commit the configuration

Step 1: Configure your WiFi credentials

  • Select System configuration, press <enter>

  • Select Network, press <enter>

  • Select WIFI, press <enter>

  • You can then configure your WiFi settings, use <tab> to navigate through the fields:

    • "Available" should have an [X]
    • "SSID": enter your SSID
    • "Security": enter your security algorithm, press <enter>, when finished to validate your choice
    • "Key": enter your security key, press <enter>
    • Move to Confirm button, Press <enter>
  • Select Back button, press <enter>, to return to the System configuration.

  • proceed to Step 2: Deactivate eth0

Step 2: Deactivate eth0

  • Select IP failover, press <enter>

  • "Interface" should be (*) eth0

  • Move to "Status", select not-used and press <enter>

  • Stay on this form for the next step and proceed to Step 3: Activate wlan0.

Step 3: Activate wlan0

  • Move to Interface, and select wlan0 using <space\>.
  • "Interface" should be (*) wlan0:

  • Move to "Status", select "primary" and press <enter>:

  • Move to Confirm, press <enter>

  • On the OK button, press <enter>:

  • Proceed to Step 4: Apply the configuration.

Step 4: Apply the configuration

  • Move to Apply, and press <enter>:

  • Press <enter> on the Confirm button:

  • Please wait, you will now loose your network connection, you need to find the WIFI address:

Step 5: Commit the configuration