Skip to main content
Version: TAO v1.x

Suplog - configuring a static IP

The gateway is originally configured for ethernet with DHCP, follow these steps to configure a fix IP address.

  • Select System configuration, press <enter>

  • Select Network, press <enter>

  • Select Network interfaces, press <enter>

  • You can then configure your interface settings, use <tab> to navigate through the fields:

    • "Interface eth0" must be selected.
    • "Active", should have an [X].
    • "DHCP activated" should be deactivated : [ ]
    • IP address, Netmask, Broadcast, Gateway, DNS list must be configured.
    • Move to the Confirm button, Press <enter>
  • Select Back button, press <enter>

  • Select Apply, press <enter>

  • You are now invited to wait, the gateway is now reconfiguring everything, but as you have changed the IP address, your console is no more on the right location.

After the configuration is applied, you must wait around 1 minute before connecting to the new IP address (you will not be able to commit the configuration before this delay). After this delay, do not forget to commit your configuration.