Skip to main content
Version: TAO v1.x

Suplog - configuring NTP Servers

Do the following steps to configure one or several NTP servers (up to three) and optionally configure the time zone if needed.

  • Select System configuration, press <enter>:

  • Select Network, press <enter>:

  • Select Network interfaces, press <enter>:

  • Select NTP and press <enter>:

  • Change the NTP servers list.
  • Move to Confirm, press <enter>.
  • Mve to Back, press <enter>.
  • Move to Apply, press <enter>.
  • After reconfiguration, commit your configuration.