Skip to main content
Version: TAO v1.x

Release notes

Version : 1.4.0

New Features

  • KerOS 5.10.1 for wirfevo
  • Support of Kerlink iStation, iBTS for Keros 4.3.3
  • RFRegion profiles : 1.8.1 (8 channels), 1.8.2 for iBTS (8 and 16 channels)
  • LRC 1.26.13 for kerlink iFemto, iFemto evo, iStation, iBTS, browan gemodu, fcpico, fcmlb, fcloc
  • LRR 2.6.56_10 for browan gemodu
  • new driver catalog : 3.7.6
  • new device profile : 7.11.1
  • node-red-contrib-acy-tao-uplink-downlink : 1.3.3
    • correction of drivers contexts that were persistent between calls, causing global var to cause problems
    • support of the new drivers : new loaders integrated

Fixed Bugs

  • node-red flow : DevEUI_downlink_Sent pushed to MQTT /downlink-status-topic
  • DeviceProfile : Drivers not called for some devices : driver entries not generated when TPXProtocolIdentifier entry is a list

Version: 1.3.2

New Features

  • Upgrade of LRC for Milesight UG65/UG67 : 1.26.9
  • Support of kerlink wirnet iFemto for Keros 4.3.3

Fixed Bugs

  • None

Version: 1.3.1

New Features

  • Upgrade of Device Profile and Payload Driver catalogs: device-profiles-7.4.0 + drivers-2.3.0.
  • Support of kerlink wirnet iFemto-Evolution for Keros 4.3.3
  • RDTP-20969 : Allow Modbus communication over port 502.
  • RDTP-20839 : Display the channel and frequency of each UL/DL packet in the last 10-packets widget.

Fixed Bugs

  • RDTP-20970 : TAO installer get stuck on outdoor gemodu, unattended reboot during installation : must deactivate watchdog during auto installation.
  • RDTP-20797 : Some SNRs with high values are displayed in orange, although they should be displayed in green.
  • RDTP-21002 : Daylight saving time change incorrect.

Version: 1.3.0

New Features

  • Support of Milesight UG65/UG67 (beta).

Fixed Bugs

  • RDTP-20683 : Restore failed.

Version: 1.2.0

New Features

  • RDTP-16253: Add a history of the last 10 UL/DL packets per device, as well as the last 10 UL/DL LoRaWAN MAC commands.
  • RDTP-19262: Add the transmission status (by the gateway) of each downlink packet in the last 10 packets widget.
  • RDTP-17465: Reporting of the connection status of the cellular interface, if this interface type is used by the gateway besides Ethernet.
  • RDTP-19251: Filter the list of device models proposed by the GUI drop-down menu, showing only the profiles matching the ISM Band inherited from the gateway's RF Region.
  • RDTP-19306: Update the link to RF Region's online documentation in GUI.
  • Beta support of Gemtek Indoor Femto model. Note: Using an external USB key is a mandatory prerequisite.
  • Upgrade the RFregion catalog to version 1.7.1.
  • Upgrade the Device Profile catalog to version 7.0.1, significantly expanding the list of supported "branded" device models.
  • Upgrade the Payload Driver catalog to version 2.0.0, significantly expanding the list of supported drivers inline with the expanded device model list.

Fixed bugs

  • RDTP-18623: Browan ODU: lrr should set usegpstime and/or usegpsposition to 1 in lrr.ini. This is required to leverage the GPS capabilities whenever supported by the gateway.
  • RDTP-18580: Update ping addresses in LRR's ifacefailover script to avoid pinging external destinations. Ping destinations are now set to 127.0.0.1 (localhost).
  • less traces:
    • lrr.ini level and debug set to 0
    • lrc.ini level and debug set to 0

Version: 1.1.1

New Features

  • Upgrade of RF Region & Device Profile catalogs: rf-regions-1.5.2 + device-profiles-6.5.0.
  • Upgrade of Drivers catalog: drivers-1.2.0.
  • RDTP-18308: Embed an MQTT server in TAO:
    • mosquitto is added.
    • Addition of a new node "Settings" to configure tao password on mosquitto.
    • MQTTChangePassword binary is added with setUid to configure mosquitto password and service reload through the node-red user.
    • All samples are now connected to that local broker.

Fixed Bugs

  • RDTP-18427: Unable to import TAO devices when a second join request was sent without uplink.
  • Optimization of driver engine integration to improve TAO performance for constrained HW gateways. This optimization is driven by RDTP-18305: TAO v1.1 doesn't work on Ufispace Pico AS923:
    • Iot Flow engine is removed.
    • node-red-contrib-acy-uplink-downlink is updated to:
      • support encoding / decoding internally (only the drivers delivery is required).
      • 2 new POST endpoints are added to serve decode / encode request using the same interface as iot flow engine.
      • Drivers are loaded dynamically in node-red-contrib-acy-uplink-downlink node only when needed.
    • LRC configuration is optimized (30% CPU to 15% CPU):
      • [labonly] MSTIC=100
      • [threads] Lrn=1
  • RDTP-18306: DL Post response is not returned by ThingPark Enterprise All-in-One (TAO):
    • node-red-contrib-acy-uplink-downlink changed to 1.2.1, witch provides downlink results
    • Downlink output is compatible to an 'http response' node so that it can connect directly
    • Sample is updated to provide :
      • for MQTT: show how to connect the downlink to an MQTT status topic
      • for HTTP: show how to support and HTTP endpoint for downlinks, and show how to connect the 'http response' node
  • RDTP-18307: Node-Red Dashboard not supported by ThingPark Enterprise All-in-One (TAO):
    • node-red-contrib-dashboard is added.
    • A sample is also added.
    • The new service is available through the http://<ip>:1323/node-red/ui standard endpoint.